Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451186
€ 450.00 Price excl. German VAT tax (19%): € 378.15- BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- suitable as a pillar adapter flange to the Baader conical steel pillar [product sku="BHP2451220
- Overall height: 100 mm
- The steel pillar flange Steel pillar flange for GM 3000 mount (#1453090 , € 275,-) is needed
-
# 1363080
€ 385.00 Price excl. German VAT tax (19%): € 323.53- Delivers a plane-parallel, achromatic beam of light with 36 mm diameter
- Designed especially for H-alpha and CaK subangstroem etalon filters
- Includes a ½" filter cell for the 2 nm block filter of the Baader SunDancer II H-alpha filter
- Can also be used in place of a Barlow lens, expands the telescope focal length by 4x
- BBAR (Broad-Band Anti-Reflection) coating
- Anti-reflective thread and blackened lens edges against reflections and for maximum contrast
- Image circle 36 mm, in a nominal in 97 mm from base of the T-2 thread
- 1¼" and 2" nosepiece with 1¼" filter thread, T-2 thread on camera side
- 12.5 mm (1/2") filter exchange tool included
- 5-year warranty if handled properly
-
# 2458233
€ 67.00 Price excl. German VAT tax (19%): € 56.30- Reducing piece: M68a to T-2a
- to change an M68 female into T-2 male thread
- combination of M68/2" UNFi changer ring (#2458232) and T-2/2" changer ring (#1508035)
- The built-in 2"/T-2 ring is removable (for this we recommend our Adjustable pin-type face wrench #2450062) and reveals a 2" SC (50,8mm) female thread
-
# 2451184
€ 720.00 Price excl. German VAT tax (19%): € 605.04- the BHPlevelling flange with 20° tilt for GM 4000 is used to extend the adjustability of the pole height by 20°. Thus, the mount can also be used in proximity to the equator.
- Consisting of two solid steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Height 100 until 151 mm
- Suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
-
From: € 275.00 Price excl. German VAT tax (19%): € 231.09
- Glasfaserleitung vom BACHES Echelle Spektrograf zur RCU (Remote Control Unit)
- Also includes the control cable in the same respective length
- Available in 3, 15 and 30 Meter length
-
# 1500203
€ 269.00 Price excl. German VAT tax (19%): € 226.05- Guidescope rings BPIII (2 pc)
- With 6 large handknobs with screw and ball bearing tips
- For tube diameter 140 - 185mm
-
# 2459133
€ 89.00 Price excl. German VAT tax (19%): € 74.79- Baader UFC S70 / C14 Hyperstar, SC, HD Adapter
- telescope-sided C14 Hyperstar, SC and EdgeHD Adapter
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
- Please note the below description on Hyperstar Adaptation
-
# 2458660
€ 425.00 Price excl. German VAT tax (19%): € 357.14- BACHES: Thermal Insulation Housing
- The CNC milled two-piece housing, protects the spectrograph from fluctuations in the outside temperature at the telescope
- Very good thermal insulation is achieved by 20mm wall thickness of weather-resistant EPS rigid foam Learn More
-
# 2450343
€ 98.00 Price excl. German VAT tax (19%): € 82.35- Laser-Collimator for easy collimation of your telescope in 1-2 minutes
- High-quality, impact-resistant and highly accurate laser, with concealed setscrews
- Precision-machined, hard-anodized barrel instead of the less accurate 1¼" chrome barrel
- Handle protector made of silicone rubber facilitates handling with gloves
- Suitable for Newton and SC telescopes, instructions included
-
# 2459134
€ 30.00 Price excl. German VAT tax (19%): € 25.21- Baader UFC S70 / SP54 (m) Adapter
- telescope-sided SP54 outer thread
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
- allows use of stepper rings to adapt the filter changer to nearly every DSLR-camera
-
From: € 299.00 Price excl. German VAT tax (19%): € 251.26
- Baader CMOS LRGB Bandpass Filter Set, suitable from f/15 to f/1.8
- Anti-reflection RGB filter (red/green/blue) with extremely high transmission of the respective color channel, thus simultaneously reducing stray light and reflections to an unprecedented level
- Including UV/IR cut (L-filter) with 98% transmission over the entire visible spectrum from 420 - 685
- Balanced RGB design allows subframes to be taken with the same exposure time – extremely important for automated imaging tasks
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
-
# 2452270
€ 445.00 Price excl. German VAT tax (19%): € 373.95- TEC case is made out of lightweight Aluminum and packed with a hard-foam interior
- With a few special sections that allow to store the APO140 with rings and plate and some small section that can be used for diagonal, eyepieces or other small size accessories
- Dimension for the case: 10" x 13.5" x 37"
- Weight: ca. 15lb
- Constructed in Germany
-
# 2458194
€ 40.00 Price excl. German VAT tax (19%): € 33.61- Converts an M68x1 (Zeiss) female thread in an M68x1 male thread!
- For the operation of 2 "/ M68
-
# 2958530
€ 61.00 Price excl. German VAT tax (19%): € 51.26- C-Mount to Canon EOS Adapter Baader C-mount adapter for DSLR camera lenses
- To connect DSLR camera lenses or DMK video modules
-
# 2957280
€ 95.00 Price excl. German VAT tax (19%): € 79.83- to connect onto Vixen Refractors with M88x1 inner threads
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
-
# 2454631
€ 195.00 Price excl. German VAT tax (19%): € 163.87- Fixed focal length of 31mm Hyperion Aspheric 2" Eyepiece, 72° extreme widefield for large field of view
- High quality Phantom Group Coating for maximum contrast
- DSLR camera adaptable as projection eyepiece, with system thread SP 54
-
# 2458236
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Inverter ring M68x0,75i/M68x1i to adapt M68 parts to Hexafoc focuser (Bresser, Omegon and Explore Scientific) with M68x0,75 male thread
- Changes a M68x1 (Zeiss) male thread into a M68x0,75 female thread
- Part is used in our M68i x 0,75 ClickLock clamp #2956269
-
From: € 89.00 Price excl. German VAT tax (19%): € 74.79
- Baader Contrast Booster® Filters completely eliminates false colour
- Removes the bluish "hue" (=lack of contrast) during lunar, planetary, solar and terrestrial observation
- Boosts contrast and sharpness for fast achromatic telescopes - with over 95% transmission
- Planeoptically polished, non-ageing sealed coating edges
- Removes unsharp stars images when using red-sensitive digital and CMOS-cameras
-
# 2450071
€ 12.00 Price excl. German VAT tax (19%): € 10.08- 3D-printed ring-wrench for Baader clamping knobs, replaces the need to mechanical lock with a hexagon key and allows easy opening and tight closing of the clamping knobs
- Suitable for all current Baader Clamps with 20mm knurled knobs:
- Baader PAN-EQ-Clamp V190 (EQ Standard) (#2451525 , € 219,-)
- Baader Pan 3 "/ EQ Dual clamp 230mm (for Losmandy and Vixen-standard) (#2451566 , € 260,-)
- Baader Pan 3 "/ EQ Dual clamp 370mm (for Losmandy and Vixen-standard) (#2451565 , € 315,-)
- Baader V-Dove Tail Clamp, Diam. 70mm, with one clamp screw (#2451530 , € 48,-)
- Baader Stronghold Tangent Assembly (various versions available)
-
# 2456410
€ 1,425.00 Price excl. German VAT tax (19%): € 1,197.48- Fifth edition of the former Carl Zeiss giant binocular with 30 mm prisms - our most elaborate binocular
- With recalculated 7-layer dereflective multi-coatings on all air-glass surfaces
- High performance beam-splitter with dielectric splitter layer
- Including 2x Baader ClickLock Eyepiece Clamp 1¼" with built in diopter-adjustment (T-2 part #08) (#2458100 , € 87,-) , 1x Baader Heavy Duty T-2 QuickChanger (T-2 part #06A) (#2456313A , € 80,-) and 1x Mark V Bino storage-case (#2456415 , € 61,-)