Product Questions
Sort by
Will this clamp fit a Zeiss Telementor dovetail? I wish to fit my telescope to an Ioptron Mini Tower. Many thanks.
Question by: Philip Grimsey on Nov 25, 2016 1:32:00 PM | 1 Answer(s)
- Description
-
Details
Baader PAN-EQ clamp V 190 - massive but lightweight EQ clamp
For fast attachment of all lenses with EQ-standard Celestron / Sky-Watcher / Vixen.
Length 190 mm, counter-pressure surface with multi-contact shaft milling for particularly gripping clamping effect even with low clamping forces.
With two large-area clamping blocks made of stainless steel / hard brass. Bottom side provided with holes suitable for mountings of Takahashi, 10Micron, Astro-Physics, Vixen, Celestron and much more. Additionally with integrated 3" dovetail, suitable for all mounts with 3" (Losmandy) clamping device. Also suitable as adapter / dovetail adapter of 3" on EQ standard.
The Pan EQ terminal V190 includes all mounting holes for attaching a variety of standard mountings (see instructions). In addition, the 3" (Losmandy) dovetail joint is milled on the bottom side so that this clamping device can alternatively also serve as a transition piece in order to be able to mount a tube with an EQ rail on a wide 3" (76 mm) clamp. Last but not least, the Pan V190 also fits on many pipe clamps to connect a guide tube free of distortion and quickly detachable for fast operation.
Related Articles
-
Baader Custom Developments for telescope installations
We received a question from our customer about our turn-key telescope solutions. It was actually only a short question, but we answer it in detail to show you what kind of benefit it provides, when ordering a complete telescope system from us. The question: Could you tell me what the OTA rings on the TEC140 in the attached image (from a Baader installation) are. I can see that the outer rings are the Baader heavy duty rings but what out the inner rings (inside the larger, outer rings). Do you sell these inner rings? Our answer: In short: Unfortunately we cannot offer these as regular purchasable products. In detail: these inner rings are always specially made for each complete telescope project where we supply all instrumentation ourselves. Only in this case we have the telescopes all in house for combining, can measure the EXACT tube diameters and fabricate matching contact-pressure rings, to stiffen out the tube(s), so that there is no chance at all that the tube itself is getting deformed from the three pressure pins of the outer heavy duty guiding rings. Such precaution is mandatory if the owner wants to do unguided imaging, since otherwise the tube will get...
-
Dovetail-bars and -clamps - the “Missing Link” for your equipment
Mounting accessories connect telescope and mount - be it for a permanent setup or to make quick changes from one instrument to the next possible. We can offer several bars and plates, so that you can adapt almost every telescope: Modell V (EQ) bars and clamps - for Vixen / Celestron / Sky-Watcher / Synta and many more. (Base width of the bar's prism: 44 mm. Bar width of the side facing the telescope: 70 mm) Modell Z bars and clamps - for Zeiss / Astro Physics (Base width of the bar's prism: 40 mm. Bar width of the side facing the telescope: 70 mm) Modell 3" bars and clamps - for Losmandy / Astro Physics (large) / Celestron (large) (Base width of the bar's prism: 76 mm, equals 3". Bar width of the side facing the telescope: 105 mm) Special lengths up to 6.000 mm long V, Z and 3" bars The matching accessories All of our dovetail bars do have integrated, deepened marking lines over the whole length of the bar. They mark the exact center line of the bar, as well as the seperation of the screw holes of Celestron telescopes and Astro-Physics mounting rings, so that you can easily drill...
Additional Information
| Manufacturer | Baader Planetarium |
|---|---|
| EAN Code | 4.04783E+12 |
| SKU (#) | 2451525 |
| Weight (NETTO) | 0.663 |
| Bar length | 190 mm |
| Clamping System | Dovetail clamp |
| Dual mounting | Yes |
| Base plate mounting options | bodenseitig mit eingefrästem 3"-Schwalbenschwanz als Reduzierstück von 3"- auf EQ-Norm |
| Bar or Clamp? | Clamp |
| Design | 3“ (76mm) Losmandy, V (44mm) Celestron/Vixen |
| Thread Drillings for | 10Micron, Astro Physics, Baader GuideScope Rings, Baader Stronghold, Celestron C8, Takahashi, Vixen |
