Bino-Viewer

Most Recent Product Questions

Rated: -1

4/19/2018 4:54 PM 2" MPCC Mark III (Multi-Purpose Coma Corrector for Newtons)

I would like to connect the MPCC Mark III to a ZWO ASI1600MC-Cooled camera that has 6.5mm back focus.

Do you sell the necessary spacers to do that?

Is Answered? Yes (1 answer)

Answer rated: 0

Try to use the camera with adapter to get the 17,5mm back focus length. In addition with this ring (set to 37,5mm) you´ll reach requiered 55mm of the MPCC: https://www.baader-planetarium.com/en/baader-varilock-46-lockable-t-2-extensiontube-29-46mm-with-spanner-tool-(t-2-part-25v).html

Answer by: Baader Web Team (Admin) on Apr 20, 2018 8:39:00 AM
Rated: -1

4/16/2018 8:31 PM Baader Sky Surfer V illuminated finder

Will the DSLR hot-shoe adapter that works with the Sky-surfer III, work with the Sky-surfer V? If not, where can I obtain a hot-shoe adapter for the Baader Sky-surfer V?
Thanks for any information.

Is Answered? Yes (1 answer)

Answer rated: 1

You cannot mount the SkySurfer V on the hot-shoe which can take the SkySurfer III. We don´t know a solution for it but fear that the big
SkySurfer V couldbe too heavy for it and may damage the camera body.
Answer by: Baader Web Team (Admin) on Apr 17, 2018 4:53:00 PM
Rated: 0

4/13/2018 5:58 PM Baader Prism Diagonal T-2/90° 32mm

I am interested in using the T-2 32 mm prism diagonal on my Orion ED80 f7.5 600mm f.l. refractor (bought in 2009). It has a 2" Craford focuser that I would attach it to. I would like to know what adapter I need to attach it to the focuser?

The focuser comes with a long 2" eyepiece holder that I want to remove to reduce the focal distance to the point of attachment to the focuser. That leaves the focuser's exterior threads exposed. The exposed threaded tube's dimensions are: ID = 2" OD = 2-1/8" exposed length is 3/8". I can't find a spec on the threads. but I count 10 threads in that 3/8".

My goal is to gain inward focus, increase contrast and clarity, and convert to the clicklock eyepiece holder. My largest eyepiece is a 32mm Optiluxe. As light conditions limit to planetary, I doubt I would get a longer f.l. eyepiece.

Is Answered? Yes (2 answers)

Answer rated: 1

To attach the prism to a 2" eyepiece clamp, you need the
Baader 2" / T-2 Nose Piece and Camera adapter (T-2 part #16) # 2408150

Orion should use the same focusers as Celestron and Sky-Watcher did on their ED80, so the Baader 2" Four-in-One Adapter M68 (Zeiss) / 2.7" (A.P.) / M60 (Vixen) / M56 (Synta) #2458190 should fit on your telescope, too.

Answer by: Baader Web Team (Admin) on Apr 16, 2018 12:45:00 PM

Answer rated: 1

Thank you. Looking up the M68 thread definition, it seems to match my measured dimensions of the end of the OTA tube which I understand is made by Synta.
Answer by: Stephen Jackson on Apr 19, 2018 9:39:17 AM
Rated: 1

4/13/2018 1:11 PM Steeldrive motor drive for classic Steeltrack focusers

I have a Steeldrive focuser motor which works fine except that the temperature never has been detected by the handcontrol or SteelGo/ASCOM. The manual suggests to fasten some screws, which has been tried without success. Do you have a solution to this problem?

Is Answered? Yes (1 answer)

Answer rated: -1

Please try first to check the temperatur sensore by using a voltmeter. The sensore should give back different resistance value in ohm so
you can see if the sensore is defect or may be something else.

Answer by: Baader Web Team (Admin) on Apr 17, 2018 4:48:00 PM
Rated: 2

4/8/2018 3:29 AM Baader 2" ClickLock Diagonal Mirror

How secure is the nosepiece when coupled to the diagonal body? Is there any risk of it loosening when subjected to heavy loads with the diagonal oriented horizontally?

Is Answered? Yes (1 answer)

Answer rated: 0

The nosepiece is extremely secure and is able to hold even very heavy payload. We've tested it with a C14, see here: https://www.baader-planetarium.com/media/wysiwyg/gross_BP28-AB2956100-06-ClickLockDiagonal-2inch.jpg (but this is not recommended for imitation).

Also we recommend to check out this Youtube Review: https://youtu.be/oYoymtIT0ww
Answer by: Baader Web Team (Admin) on Apr 9, 2018 9:25:00 AM

Mark V Großfeld (Giant)-Binocular

# 2456410

Maxbright Binocular incl. case

# 2456450

Baader Extension / Spacertube 1¼"

# 2456325

Baader 45 ° Maxbright Amici prism 1¼ "with built-in 2x glass path corrector

# 2956155

Glasspathcorrector® 1:1,25 for Baader Maxbright Binocular

# 2456314

Glasspathcorrector® 1:1,25 for Baader Mark V Großfeld Binocular

# 2456314Z

Glasspathcorrector® 1:1,70 for Baader Maxbright Binocular

# 2456316

Glasspathcorrector® 1:1,70 for Baader Mark V Großfeld Binocular

# 2456316Z

Glasspathcorrector® 1:2,60 for Maxbright and Mark V Großfeld Binocular

# 2456317

2" Glasspathcorrector® 1,7x for Newtons

# 2456300

2" Glasspathcorrector® 1,7x for Newtons incl. T-2 change ring

# 2456301

2" Glasspathcorrector® 1,8x for Refractors and SC's

# 2456305