Product Questions
Do you have a hole spacing and hole type diagram for this product that will allow me to assess it for compatibility with my mount? If so, would you be willing to email it to me or alternatively, post it with the item description in your online shop?
Regards,
Rob Worrall
Regards,
Rob Worrall
Question by: Rob Worrall on Feb 28, 2020 5:36:00 AM | 1 Answer(s)
- Description
-
Details
Baader PAN-EQ clamp V370 dual clamp
The PAN 3"/ EQ 370 offers a secure and absolutely firm clamping - for all standard mounting rails - nothing can twist any more, the rail replaces a running weight at the same time because it is far forward and the telescope tube can be balanced much better! At the front end, a tangential mount (e.g., Stronghold) can be attached and make starfield images without photographing the telescope tube. Weight 1,500 g.
Related Articles
-
Baader Custom Developments for telescope installations
We received a question from our customer about our turn-key telescope solutions. It was actually only a short question, but we answer it in detail to show you what kind of benefit it provides, when ordering a complete telescope system from us. The question: Could you tell me what the OTA rings on the TEC140 in the attached image (from a Baader installation) are. I can see that the outer rings are the Baader heavy duty rings but what out the inner rings (inside the larger, outer rings). Do you sell these inner rings? Our answer: In short: Unfortunately we cannot offer these as regular purchasable products. In detail: these inner rings are always specially made for each complete telescope project where we supply all instrumentation ourselves. Only in this case we have the telescopes all in house for combining, can measure the EXACT tube diameters and fabricate matching contact-pressure rings, to stiffen out the tube(s), so that there is no chance at all that the tube itself is getting deformed from the three pressure pins of the outer heavy duty guiding rings. Such precaution is mandatory if the owner wants to do unguided imaging, since otherwise the tube will get...
-
Dovetail-bars and -clamps - the “Missing Link” for your equipment
Mounting accessories connect telescope and mount - be it for a permanent setup or to make quick changes from one instrument to the next possible. We can offer several bars and plates, so that you can adapt almost every telescope: Modell V (EQ) bars and clamps - for Vixen / Celestron / Sky-Watcher / Synta and many more. (Base width of the bar's prism: 44 mm. Bar width of the side facing the telescope: 70 mm) Modell Z bars and clamps - for Zeiss / Astro Physics (Base width of the bar's prism: 40 mm. Bar width of the side facing the telescope: 70 mm) Modell 3" bars and clamps - for Losmandy / Astro Physics (large) / Celestron (large) (Base width of the bar's prism: 76 mm, equals 3". Bar width of the side facing the telescope: 105 mm) Special lengths up to 6.000 mm long V, Z and 3" bars The matching accessories All of our dovetail bars do have integrated, deepened marking lines over the whole length of the bar. They mark the exact center line of the bar, as well as the seperation of the screw holes of Celestron telescopes and Astro-Physics mounting rings, so that you can easily drill...
Additional Information
| Manufacturer | Baader Planetarium |
|---|---|
| EAN Code | 4.04783E+12 |
| SKU (#) | 2451565 |
| Net weight (kg) | 1.35 |
| Bar length | 370 mm |
| Clamping System | Dovetail clamp |
| Dual mounting | Yes |
| Bar or Clamp? | Clamp |
| Design | 3“ (76mm) Losmandy, V (44mm) Celestron/Vixen |
| Thread Drillings for | 10Micron, Astro Physics, Baader GuideScope Rings, Baader Stronghold, Celestron C8, Celestron C9¼, Celestron C11, Takahashi, Vixen |
