QHYCCD

• All-in-one cooled 8.3 megapixel CCD camera
• With built-in seven-position filter wheel that will hold 36mm round unmounted filters
• Uses the popular KAF-8300 4/3-inch monochrome CCD Sensor
• 3358 x 2536 pixel array at 5.4µm
• Supports the QHYOAG
• With Butterfly Shutter – a mechanical shutter that has the shape of a butterfly
• Dual-stage Thermoelectric Cooling (TEC), achieve -45 below ambient.
• Offers an internal USB HUB(2.0) providing two USB host ports and a USB to dual RS232 converter.
• Include a 12V single cable
• optional accessories: QHY Off-Axis Guider Small (OAG-S) (#1932000 , € 228,-)

QHY Adapter Kits available in three different combinations for QHY 294M / QHY 163M cameras and QHY accessories:

• QHY Adapter Kit A1 compatible with QHY Filter Wheel CFW3-M thin and QHY Medium Off-Axis Guider (OAG-M)
• QHY Adapter Kit A2 compatible with QHY Filter Wheel CFW3-S thin and Canon EF Lens
• QHY Adapter Kit A3 compatible with QHY Filter Wheel CFW3-M thin and Nikon F Lens
• Please select the appropriate adapter kit (A1, A2, A3) from the drop-down menu below for further technical details

• active cables for bridging longer distances
• have integrated signal amplifiers to counteract technically caused signal loss due to signal attenuation, electrical crosstalk or external interference.
• includes 5V AC power adapter
• available in lengths of 5 and 10 meters
• Please note: According to the characteristics of USB3.0, the maximum supported cable length is about 3 meters, transmission stability cannot be guaranteed beyond this length. In order to ensure the image quality, the standard USB cable length of QHY is 1.8 meters.

• QHY Level Convert Board to make the connection of QHY cameras more user-friendly and reduce the risk of damage.
• Support the QHY GPS box without any further modifications and is indispensable for upgrading the QHY GPS Box (#1932500 , € 540,-) (for 6-pin connectors).
• Four CMOS gates are the most important part of this board.
• The gate’s direction can be controlled by the DIP switch. It can be configured as output direction or input direction, to match the different modes of the four IO pins.
• Different IO voltage can be applied to this gate. So on the user side, it can be configured to different VCC voltage.
• The range is from +1.8V to +5V. The output signal in the user socket will be the voltage of the VCC

• Sensor: Sony IMX715 BSI sensor - only available as color version
• Pixel size: 1.45 µm x 1.45 µm
• Number of pixels: 3.840 x 2.192 (5.6 x 3.2 mm) - 8.4 MegaPixel
• Readout noise: 0.87e- to 2.17e-
• Full well capacity: 5.7ke-
• Maximum frame rate: 42 frames per second at full resolution
• Exposure times: 11µs - 900 seconds

• Back-Illuminated uncooled CMOS camera (monochrome)
• Uses a a 1/1.8-inch, 6.0 Megapixel IMX178 STARVIS Exmor R CMOS sensor
• 3072 x 2048 Pixel Array
• Is designed to be a wide FOV autoguider, high-resolution planetary camera, and entery level deep sky camera
• Output is 50 FPS at full resolution and up to 190 FPS at selected ROI
• Fit in a standard 1.25-inch eyepiece
• Use a 5Gbps USB3.0 interface and Anti-Amp Glow Control. Please note: the camera is powered exclusively with the included USB 3.0 cable!
• With Advanced Heat Design and Aircraft Spec Socket

• Cooled medium size 4/3inch monochrome camera with exceptional low-illumination performance and super low dark current (0.005e-/p/s @ -20C) with expanded Pixel Mode from 11.7 MP to 46.8 Megapixel at 2.315µm
• Uses a SonyIMX492 STARVIS Exmor R Back-Illuminated CMOS sensor in the format 19,28 x 12,95 mm.
• Enables two different readout modes: 11.7 MP (4.164 x 2,796 pixels) with 4.63 µm pixel size at 14 bits data depth (mode o). The second read mode unlocks the binning to produce 46.8 MP images with 2.315 µm pixel size at 12 bits per pixel (mode 1).
• 6,8e- readout noise in lowest gain, 1.6e- read noise near unity gain and 1e- read noise at highest gain
• Exposure duration from 60µs to 3600sec
• With electronic rolling shutter
• Two-stage Thermoelectric Cooling (TE) about -30 to -35C blow below ambient 
• Anti-Noise, Anti-Glow and Anti-Dew Technology 
• With USB3.0 High Speed Transfer 
• Include 256MB DDR3 Image Buffer 
• Short back focal distance of 17 +/- 0.5 mm

• Ring-Dovetail-Adapter for combining smaller 1 ¼" monochrome and QHY Color Filter Wheels
• with 1 ¼" or 31mm filters
• compatible with QHY CFW3-S and CFW3-M Filter Wheels (SR- or US version) for planetary-, spolar- and Deep Space photography

• Compatible with all cooled CMOS cameras, QHY Filter Wheels CFW3-S Standard, CFW3-S thin, CFW3-L and QHY Off-Axis Guider Medium (OAG-M)
• Kit includes:
  • 1x 5mm M54 to M48 Adapter
  • 1x 3mm M54 to M42 Adapter
  • 1x QHY 2,5mm 2" Filter Fixer #1932780
  • 1x 4mm M54 Screwed Adapter (original name QHY #020070)
  • 1x Cam Top Adapter (QHY #020063)
  • 1x  0.5mm/1mm/2mm/3mm/7mm/10mm/14mm Spacer
  • 8x 8mm M3 screws
  • 8x 10mm M3 screws
  • 8x 12mm M3 screws
  • 8x 14mm M3 screws
  • 8x 16mm M3 screws
  • 8x 21mm M3 screws
  • 8x 24mm M3 screws
  • 8x 28mm M3 screws
  • 8x 36mm M3 screws
  • 8x 50mm M3 screws

• High resolution, monochrome BSI CMOS camera with 102 MegaPixel and highest quantum efficiency with extremely low readout noise.
• Sensor: Sony BSI IMX461 Sensor, Pixel size 3.76μm x 3.76μm
• Sensor size: 44 x 33 mm, image diagonal 55 mm
• AD conversion: unaltered, true 16 bit (65,536 grayscale)
• Readout noise: 1e- to 3.7 e- (depending on readout modes)
• Data interface: USB 3.0
• Internal image memory: DDR 3, 1 GBy
• Full well: up to 720 ke- depending on readout mode at high dynamic range
• Quantum efficiency: max. 90% at 450 nanometers
• Dark current noise: about 0.003e-/pixel/sec at -20°C
• Amplifier glow: Zero
• Noise reduction: user selectable
• Image readout: 4 different modes, user selectable
• This camera model is also available as a scientific PRO version with USB3.0 and 2x10 Gigabit fibre optic interface: QHY 461 M/C PRO, BSI Cooled Scientific Cameras (various versions available)

• Ultra-light guiding telescope for CMOS cameras of the QHY5 II and III series in elegant design
• With a telescope mounting kit
• The achromatic lens with its broadband antireflection coating produces ultra-sharp, pinpoint star images.
• Focal length 130 at 30 mm aperture
• Weight (without CMOS camera) only 111 grams
• Compatible camera models: QHY5L-II-C, QHY5L-II-M, QHY5R-II-C, QHY5P-II-C, QHY5P-II-M, QHY5III224, QHY5III178, QHY5III185, QHY5III174 and QHY5III290

• Cooled Small Size COLDMOS camera with GPS PPS Synced High Precision Hardware Stamp, selected by the NASA New Horizons Team
• Ultra compact with high frame rates, ultra low read noise, high sensitivity and excellent dark current performance 
• Uses the SONY IMX174 CMOS Front Iluminated sensor of 11.25 x 7.03 mm size, 2.3 Megapixel (1920 x 1200 pixel array) at 5.86µm with global shutter
• 138FPS at 1920x1200 resolution, high QE of 78%, and low read noise of 3-5e- 
• Provide highly accurate timing of multiple exposure per second at 5 different sites, all synchronized to the same time base
• Exposure duration from 50µs to 1800sec 
• Dual stage TE cooling to -45C below ambient 
• Anti-Noise, Anti-Amp Glow and Anti-Dew Technology
• USB3.0 High Speed Transfer 
• With 4-pin QHYCFW2 filter wheel control port and a 6-pin autoguider port 
• Includes two working modes: Free Running Mode and Multi-Site Sync Mode
• Ideal for multi-site, high precision timing of exoplanet light curve measurements and is the for cooperative multi-site imaging of asteroid occultations.
• Available as color and mono version. Please select the appropriate camera for further technical details form the Drop-Down menu below

QHY Adapter Kits available in three different combinations for QHY268C / QHY168C / QHY247C / QHY128C / QHY410C / QHY367C:

• QHY Adapter Kit D1 with achievable 55 mm backfocus length e.g. for MPCC
• QHY Adapter Kit D2 with achievable back focus length of 44.1 mm with adaptable Canon EF lens, also applicable for all QHY600 standard versions without filter wheel
• QHY Adapter Kit D3 with achievable back focus length of 46.5 mm with adaptable Nikon F lens, also applicable for all QHY600 standard versions without filter wheel
• Please select the appropriate adapter kit (D1, D2, D3) from the drop-down menu below for further technical details

• Includes desiccant container and hoses connected to the camera.
• Suitable for a larger amount of silica gel to maintain a dry state for a very long period without maintenance. Desiccant is not included in the scope of delivery. We recommend optional: Silica Gel, orange with coloured indicator, reusable, 125ccm (#1905160 , € 22,-)
• Suitable for QHY cameras that are not to be maintained for a long period of time
• Highly recommended for the SBFL body styles of cameras (QHY600 Ultra Short and QHY268 Ultra Short), which can absorb less moisture before dew forms due to their lower air volume in the sensor chamber

Now available as Mono version

• Back-Illuminated CMOS + NIR (near infrared) planetary cameras
• With sHGC for extremely low read noise (less than one electron) at high gain
• Uses the latest 2.1 megapixel IMX462 STARVIS CMOS sensor from Sony
• 1920 x 1080 Pixel Array, pixel size of 2.9µm, diagonal 6.5mm
• Support any region ROI
• High QE in the Red and Near IR. The peak QE in the NIR around 800nm is as high or higher as the peak QE in the visible wavelengths.
• Fast frame rates (135 FPS@ 8bit)
• Exposure Time Range from 7µs-900sec
• AD Sample Depth of 12bit (output as 16bit and 8bit)
• Build-in total 512Kbytes Flash Memory. 100Kbytes user-accessible space
• QHY462C includes UV/IR and IR850 filters for RGB, LRGB, IR and monochrome imaging all with one camera, the QHY462M includes IR850 filter.
• Ideal for color planetary- and methan band imaging
• Fit in a standard 1.25-inch eyepiece, Standard 6-pin RJ11 Guide Port
• Use a 5 Gbps USB3.0 interface. Please note: the camera is powered exclusively with the included USB 3.0 cable! The camera has no active cooling
• Please select the appropriate accesspry set for further technical details form the Drop-Down menu below. The QHY 5 III 462 C is available with different accessory sets.

• Cooled CMOS camera with Back Side Illumintad technology with Sony sensor 533M/C
• Sensor format, square, 3003 x 3003 pixels
• Sensor size 12, x 12.3 mm, diagonal 15.9 mm Pixel size 3.76 µm
• Quantum efficiency over 90% at 450 nanometers (monochrome sensor)
• Exposure times up to 3600 seconds
• Full well capacity 58 ke-
• Readout noise 1.3e- to 3.4 e-
• Dark current 0.0005 e-/pixel/sec at - 20 degrees
• AD conversion 14 bit
• Interface USB 3 High Speed
• Maximum frame rate 27 full frames at 8 bit and 18 full frames at 14 bit, ROI possible (depending on control computer)
• Shutter rolling shutter
• Large internal image memory with 1 GBy DDR3
• 2-stage TE cooling, 35 degrees below ambient at exposure times > 1 second
• With "Anti-Noise", "Anti Amplfier Glow" and "AntiDew" technology
• Diameter and length 90 x 107 mm (optimal for RASA and Hyperstar telescopes)
• Backfocus at 17,5 millimeter
• Please select the appropriate QHY533 camera for more technical details from the dropdown menu below.

QHY Adapter Kits available in five different combinations for QHY286M / QHY600 (Short BFL Version) cameras and QHY accessories:

• QHY Adapter Kit B1 (various application possibilities)
• for QHY268M or QHY600 (Short BFL Version), compatible with QHY Filter Wheel CFW3-L and QHY Medium Off-Axis Guider (OAG-M) or
• for QHY268M, compatible with QHY Filter Wheel CFW3-M thin and QHY Medium Off-Axis Guider (OAG-M)
• QHY Adapter Kit B2 for QHY268M: compatible with QHY Filter Wheel CFW3-L and Canon EF Lens
• QHY Adapter Kit B3 for QHY268M: compatible with QHY Filter Wheel CFW3-L and Nikon F Lens
• Please select the appropriate Adapter Kit from the drop-down menu below for further technical details

• Improved version of its predecessor, the QHY 5-III-485C Planetary and All Sky Camera (#1931030 , € 395,-) with enhanced sensitivity in the near infrared spectral range (NIR).
• Uses Sony's new Starvis II Color CMOS Sensor IMX 585 Back-Side-Illuminated Sensor (BSI) with high dynamic range (HDR) of 88 dB
• 3856 x 2180 Pixel Array. pixel size of 2,9µm to photograph all objects of the solar system
• Full frame rate of 23,5 FPS  at16-bits or 41,5 FPS at 8-bits
• Its sensitivity in the near-infrared range is about 1.7 times higher than that of the old IMX 485 C sensor.
• Improved front-end design – compatible with CS and C-mount lenses
• 1¼" body size for direct telescope connection
• 512MB DDR3 internal image memory
• USB 3.2 Type-C interface. Please note: the camera is powered exclusively with the included USB cable!
• Universal ST-4 guiding interface and LED status indicator for malfunctions
• Includes a UV blocking filter and an IR 850nm filter

• QHYCFW3 Color Filter Wheel are available in 5, 7 and 9 filter Positions and various filter sizes
• Specially designed filter carousel version can be fixed with 31mm unmounted filters through the new-added screw holes
• Working with high quality ultra-thin hybrid stePPer motor
• Uses a friction drive that with zero backlash. It also Positions and stops with high precision
• Increased the Precision of filter Positioning.
• Supports USB Port and Powered by USB when connected with computer.
• Supports the 4-Pin QHY CFW socket
• QHYCFW3 Color Filter Wheels are available in four versions: QHYCFW3XL (extra-large size), QHYCFW3L (large size), QHYCFW3M (medium size), and QHYCFW3S (small size). Both the QHYCFW3M and QHYCFW3S are also available in a standard version and thin version. Please select the aPProPriate QHYCFW3 for further technical details form the DroP-Down menu below