Baader Planetarium

• Adapter M82/M68
• Reducer ring for Baader 3" Hyperion Focuser

• Baader H-alpha Ultra-Narrowband Filter – Premium Grade
• 3.5 nm FWHM (to harmonize the exposure time with O-III / S-II), recommended for optical systems from > f/3.4
• For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

We explicitly warn against observing the sun with a DeepSky 3.5 nm (equivalent to 35 Ångstroem) H-alpha narrowband filter, specialized solar chromosphere and prominence filters from SolarSpectrum start at 0.8 Ångstroem. Photographic experiments with a camera are theoretically possible, but by no means observe the sun with naked eyes – you endanger your eyesight!

• BACHES M68 Adapter
• Allows to connect BACHES to the Baader (Zeiss) M68-System
• The M68-System allows attachment of BACHES to the most commonly used telescopes worldwide, also many cameras can be attached to this versatile system

Please note: The course is held in german language only

• 12 Kapitel als Webseite und druckbare PDFs (über 130 Seiten) zum Download, verteilt über drei Monate
• Behandelt Grundlagen der Astronomie, der Himmelsbeobachtung sowie der Auswahl und Bedienung von Teleskopen und Zubehör
• Freie Zeiteinteilung dank Mailingliste
• Betreuung durch den erfahrenen Amateurastronom und Autor Alexander Kerste
• Geld-zurück-Garantie: Auch bei Bezahlung per Vorkasse erhalten Sie die Teilnahmegebühr zurück, wenn Sie innerhalb der ersten zwei Wochen aussteigen. Die Frist beginnt erst mit Kursbeginn und nicht mit dem Anmeldedatum!

Der nächste Einsteigerkurs findet vom 4. September bis 4. Dezember 2022 statt. Die Anmeldefrist endet nach dem Schnupperzeitraum am 18. September 2022. Es gelten spezielle Allgemeinen Geschäftsbedingungen und die Widerrufsbelehrung für den Einsteigerkurs.

• For Zeiss Quick Changer
• This T-2 dustcap is included in the scope of supply of the following products:
  • 2" Glasspathcorrector® 1,7x for Newtons (#2456300 , € 205,-)
  • Baader T-2 Quick Changer with Zeiss Micro Bayonet (T-2 part #06) (#2456313 , € 41,-)
  • Baader Heavy Duty T-2 QuickChanger (T-2 part #06A) (#2456313A , € 80,-)
  • Baader Complete T-2 Changer System (T-2 parts #06 & #07) (#2456321 , € 80,-)
  • Baader TQC/TCR Heavy duty T-2 Quick Changing System (T-2 part #06A & #07) (#2456322 , € 111,-)
  • Mark V Großfeld (Giant)-Binocular (#2456410 , € 1425,-)
  • DADOS Slit – Spectrograph (#2458550 , € 2360,-)

• Baader T-Ring to connect Sony E/NEX DSLR cameras on the Astro T-2 system
• All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
• Ultra-short Backfocus of only 26.3mm (18mm camera, 8.3mm Wide-T-ring). Furthermore, the illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
• Camera-sided connection: Sony E / NEX bayonet
• Telescope-sided connection: S52 dovetail clamp incl. S52/M48i and M48a/T-2i internal thread with 0.75mm pitch

• For locking camera orientation
• Fits between (almost) any of our T-2 fittings
• Allows the rotational rotation of flanged accessories, locking in the appropriate position
• An important component to heavy CCD cameras to connect directly with T-2 thread without the compromise of a plug connection

• Network Cable (red) with ColdTemp-specified CAT-7 wire (CAT6a plug)
• Ideally suited for observatory installations. The special sheath of these cables remains elastic and shatterproof, even at low temperatures.
• Normal network cables that are passed through the mount could break or be damaged due to the very small bending radius
• The CAT 7 specification of the cable allows cable management next to power cables in mounts at short range up to 220V without affecting the data.
• available in 3, 5, 15, 30 meters
Learn More

• High-precision, temperature-compensating focusing motor with toothed belt drive for heavy loads (up to 8 kg).
• Prepared for connection to all Baader Steeltrack® focusers (classic and Diamond).
• Contactless end sensor (homing switch) for precise, repeatable positioning to stored absolute positions
• Incl. hand controller with intuitive operation, can alternatively be controlled via PC with USB interface via ASCOM or SteelGO software (for Windows)
• Connection for temperature sensors and additional 12 V / 1A PWM current output, e.g. for dew cap heater

• Input Voltage 110-240 volts, output voltage 24 V / 5 amps (factory setting)
• Connection cable fitting for GM 1000 HPS mount
• Short circuit protection

• Heavy duty quick change system - clamping for heavy accessories with large brass clamp
• T-Quick Changer (with Zeiss pressure block) literally equals the Zeiss-original - only it does incorporate a contemporary T-2 female thread (M42x0.75)
• Optical path length 15mm
• Includes 1x Baader Molded Plastic Cap T-2 for Zeiss Quick Changer (#2904020 , € € 6.50)

• BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height: 100 mm

• Sun replacement halogen bulb - without socket.
• Custom made with sprue spigot at the bottom to allow projection. This bulb is not freely available in stores.
• Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
• Please use only this bulb, otherwise you may destroy the transformer of the device, which due to its size can not output more light power. For continuous operation (3 hours and more), the medium light level must be used.

• Baader UFC Base (Filter Chamber) for 2" / 50.4 / 50x50 filter slider
• elescope-sided with S70 dovetail receptor clamp
• camera-sided with mounting plate for adapting UFC camera-adapters
• The UFC-base is the foundation of our Universal-Filter-Changer system and is needed at least once as chamber for the filter sliders/containers and to adapt telescope- and camera-adapters.

• C-Mount to Canon EOS Adapter Baader C-mount adapter for DSLR camera lenses
• To connect DSLR camera lenses or DMK video modules

• suitable for Vixen Sphinx mount
• suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
• also fits onto Vixen-, Bresser- or Sky-Watcher tripods
• Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed

• Morpheus® Adapter to convert the Morpheus M43 male top-thread into a SP54 male thread – without adding onto the optical height
• this adapter allows connection of most standard camera-lenses with filter threads to adapt onto each Morpheus®eyepiece, to use the eyepiece for afocal eyepiece projection photography and achieve outstanding planetary images
• for connecting your camera-lens onto the SP54 thread, you need in addition our "Hyperion DT-rings"
• this adapter is exclusively suitable for Morpheus® 76° eyepieces and is not designed to fit the Hyperion or Hyperion-Zoom family of eyepieces because the optical distance must fit for the Morpheus-eyepieces

• Baader T-Ring to connect Pentax-K DSLR cameras on the Astro T-2 system
• Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
• On the camera side: Pentax K bayonet
• Telescope side: T-2 internal thread with 0.75mm pitch

• SR41W/1.55V 10 pc
• For illuminator
• Not for VarioFinder