Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2958500B
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Very short adapter, changes from 2" SC / HD male thread to T-2 male thread
- Ultrashort Adapter for all Schmidt-Cassegrain / EdgeHD telescopes
- SC-T Ultrashort Adapter, T-2 outer (male) thread / 2" SC inner (female) thread, pitch: 24/inch
- Only 9mm optical path length (8mm with the Delrin-ring removed)
-
# 2957280
€ 95.00 Price excl. German VAT tax (19%): € 79.83- to connect onto Vixen Refractors with M88x1 inner threads
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
-
# 2454631
€ 195.00 Price excl. German VAT tax (19%): € 163.87- Fixed focal length of 31mm Hyperion Aspheric 2" Eyepiece, 72° extreme widefield for large field of view
- High quality Phantom Group Coating for maximum contrast
- DSLR camera adaptable as projection eyepiece, with system thread SP 54
-
# 2458237
€ 46.00 Price excl. German VAT tax (19%): € 38.66- Adapter with M68i x1 to M74i x1 female threads, to adapt M68 parts to focusers with M74 x 1 male thread, e.g. Skywatcher Esprit 120&150, TS-Optics and Omegon APOs 150/1000 with Linearpower focuser
- Changes a M68x1 (Zeiss) male thread into a M74 x 1 female thread
- Part is used in our M74i x 1 ClickLock clamp #2956274
- Optical height: 12,7 mm, Inner diameter (clear aperture): 67 mm
-
# 2458655
€ 0.00 Price excl. German VAT tax (19%): € 0.00- MIBAS is a virtual machine built on the Linux distribution Fedora with installed and ready to use IRAF (Image Reduction and Analysis Facility) and ESO MIDAS (Munich Image Data Analysis System) installations. IRAF and MIDAS comprise a plethora of established tools for image analysis in the field of astronomy.
- Dedicated software for automated wavelength calibration and data reduction pipelines for the BACHES Spectrograph.
- IRAF and MIDAS, preconfigured and ready to go.
- Includes ESO SciSoft astronomical software collection.
- Write publication grade science reports with includededitor and templates.
- Cross-platform.
-
# 2450071
€ 12.00 Price excl. German VAT tax (19%): € 10.08- 3D-printed ring-wrench for Baader clamping knobs, replaces the need to mechanical lock with a hexagon key and allows easy opening and tight closing of the clamping knobs
- Suitable for all current Baader Clamps with 20mm knurled knobs:
- Baader PAN-EQ-Clamp V190 (EQ Standard) (#2451525 , € 219,-)
- Baader Pan 3 "/ EQ Dual clamp 230mm (for Losmandy and Vixen-standard) (#2451566 , € 260,-)
- Baader Pan 3 "/ EQ Dual clamp 370mm (for Losmandy and Vixen-standard) (#2451565 , € 315,-)
- Baader V-Dove Tail Clamp, Diam. 70mm, with one clamp screw (#2451530 , € 48,-)
- Baader Stronghold Tangent Assembly (various versions available)
-
# 2456410
€ 1,425.00 Price excl. German VAT tax (19%): € 1,197.48- Fifth edition of the former Carl Zeiss giant binocular with 30 mm prisms - our most elaborate binocular
- With recalculated 7-layer dereflective multi-coatings on all air-glass surfaces
- High performance beam-splitter with dielectric splitter layer
- Including 2x Baader ClickLock Eyepiece Clamp 1¼" with built in diopter-adjustment (T-2 part #08) (#2458100 , € 87,-) , 1x Baader Heavy Duty T-2 QuickChanger (T-2 part #06A) (#2456313A , € 80,-) and 1x Mark V Bino storage-case (#2456415 , € 61,-)
-
# 2459124
€ 36.00 Price excl. German VAT tax (19%): € 30.25- Baader UFC S70 Dovetail-Adapter
- Telescope-sided with mounting plate for UFC-Base (screws included)
- Camera-sided with S70 dovetail to stack several UFC bases in order to be able to use more then one filter in the light path
- Enables Special applications for IDAS photography, image composition as well as stacking
- Can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-)
-
# 2958080
€ 19.00 Price excl. German VAT tax (19%): € 15.97- To connect DSLR T-rings
- Connection to the Astro T-2 system for classical eyepiece projection
- For Hyperion and Morpheus® eyepieces
- For a larger scale projection can be additionally T-2 extension tubes (M42 x 0.75, available in lengths of 7.5 / 15/40 and 8-14 mm variable) Screw
-
# 2451102
€ 85.00 Price excl. German VAT tax (19%): € 71.43- Fits C8/9/11" OTAs onto Zeiss/Astro Physics clamps
- Length = 470mm, with 40mm wider contact surface for the attachment of any pipe clamps Suitable for Astrophysics and Zeiss clamps
- Weight: approx 630g
-
# 2458590
€ 32.00 Price excl. German VAT tax (19%): € 26.89- Only available in connection with the DADOS slit spektrograph
- with 220V cable and 2“ sliding cap
- Please note below information on the calbration lamp brightness level
-
# 2459097
€ 129.00 Price excl. German VAT tax (19%): € 108.40- Set consisting of four pieces 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- 31 mm filter holder also available as single item: 31 mm filter holder for Baader FCCT (3D-printed) (#2459087 , € 38,-)
-
# 1508037
€ 33.00 Price excl. German VAT tax (19%): € 27.73- Telescope-sided with M43 x 1 male thread, e.g. for Vixen instruments
- Eyepiece-sided with T-2 (M42 x 0,75) male thread
- This connection ring allows to connect e.g. a binoviewer or a ClickLock® eyepiece directly at the focuser with M43 x 1 female thread (e.g. Vixen / Lichtenknecker)
- Optical path length only 3 mm
- To use T-2 parts on a M43i x1 female thread (meaning a M43 female thread with 1mm pitch per turn), we recommend our Baader M43a x 0.75 / T-2a Adapter (e.g. for Takahashi) (#2458199 , € 37,-)
-
# 2451735
€ 77.00 Price excl. German VAT tax (19%): € 64.71- V-Dovetail for Celestron RASA 8" optical tube, length = 495mm
- Aluminium body provides a sturdy platform for accessories
- Connects on the top of the Rowe-Ackermann Schmidt Astrograph 8" to attach accessories to the optical tube
- Installs easily into the existing holes of the RASA 8" and is fastened with the screws that are included in the delivery of the RASA 8"
-
# 2905010
€ 39.00 Price excl. German VAT tax (19%): € 32.77- Consist of 100ml Optical Wonder™ Cleaning Fluid, Cloth and Celestron LensPen™
- Works on all sensitive optical surfaces
- Dislodges dirt, aggressive aetherical oils from pollen and fat – dries up completely without leaving any residue or wipemarks
- cleans without scratching: eyepieces, objective lenses – even mirrors (please see separate instruction)
- With the LensPen cleaning pen that can never dry out, you can also reach areas that are not easy to access on small optical surfaces
-
# 2459195
€ 75.00 Price excl. German VAT tax (19%): € 63.03- UFC-Case for filter sliders with mounted filter
- Storage box with hinged lid holds all UFC filter sliders
- By popular request, we have published not only the simplified print data of the UFC case, but also the data set with a screw connection as hinge (for DIN 912 M4x10 screws). The Baader UFC case can now be ordered or is available free of charge as a 3d printable file. This can only be assembled with a little more mechanical skill, as you have to cut an M4 or M6 thread on the underside of the case in each case. You will also need the appropriate screws, which you can normally buy at a DIY store. We do not deliver screws matching the print data ourselves and ask for your understanding.
- STL files for free download are available under TAB DOWNLOADS. You only need to login with your customer account or register on our website.
Please note: The download file is licensed under the Creative Commons License CC BY-NC-SA 4.0. You may pass on the file under Attribution © Baader Planetarium GmbH as well as linking the license and indicating any changes. The file may not be used for commercial purposes. If the file is changed, it must be redistributed under the same license.
-
# 2408191
€ 40.00 Price excl. German VAT tax (19%): € 33.61- Eyepiece barrel reducing 1¼ "on 24.5mm
- With filter thread M28.5 for 1¼ "eyepiece
- For clamping of eyepieces with 24.5mm diameter at 1¼ "eyepiece holder.
- 6.5mm optical path length
-
From: € 722.00 Price excl. German VAT tax (19%): € 606.72
- Baader H-alpha / O-III / S-II f/3 Ultra-Highspeed Filter Set – Premium Grade
- 3.5 / 4 nm FWHM (to harmonize the exposure time from H-alpha with O-III / S-II), recommended for fast optical systems from f/3.4 to f/2.3
- Specially designed for the special filter requirements when used with fast f/3 optics
- For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
-
# 2956152
€ 292.00 Price excl. German VAT tax (19%): € 245.38- 90 ° Amici-erecting-prism with 2 "eyepiece and 2" barrel
- Including Reduction 2 "to 1¼"
- Excellent for terrestrial viewing with 2 "eyepieces
- Not suitable for high magnification - for high quality astronomical images with high magnification using better our mirrors and prisms
-
From: € 22.00 Price excl. German VAT tax (19%): € 18.49
- Used for eyepiece projection with shift/sliding focuser
- Telescope side T-2 (M42x0.75) female thread
- Eyepiece-/camera side T-2 (M42x0.75) male thread
- High-quality Aluminum, available in different lengths