Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2459112
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Baader UFC 2" Filter Slider / Filter Container M48
- suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
- slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
- Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side
-
# 2457635
€ 95.00 Price excl. German VAT tax (19%): € 79.83- suitable for mounts which need a higer voltage of 24V (this cable is equipped with connector for 10Micron GM1000 / GM2000)
- the Baader Planetarium Dual-Mode cable set allows you use two PowerTanks to power those mounts which need 24V, in this case for professional mounts like a 10Micron
- The cable is custom-made and only available directly through Baader Planetarium
-
# 2451116
€ 122.00 Price excl. German VAT tax (19%): € 102.52- suitable for Celestron CGEM-DX- and CGE-Pro mounts
- Suitable for the and Baader Hardwood Tripods
- Attention: for Adaptation on Baader Short Pillar III w/o Flange Adapter (#2451150 , € 260,-) the Universal Base-Ring for Baader Short-Steel-Pillar III (#2451155 , € 61,-) is needed.
-
# 2458121
€ 31.00 Price excl. German VAT tax (19%): € 26.05- Ultra short 1¼" eyepiece-clamp (w. brass locking ring)
- Optical length: 20mm
- Optimized for guiding camera, w. three set screws for utmost stability and for centering of undersized camera-nosepieces
- adapts onto male T-2 thread
- First introduced as part of our Vario Finder 10x60 – long avaited individual part within the Baader Astro T-2 family of adapters
-
From: € 48.00 Price excl. German VAT tax (19%): € 40.34
- Baader Neutral Density Filters ND 0.6 / 0.9 / 1.8 / 3.0.
- For perfect energy management during Lunar and Solar observation. Suitable for solar observing only as an additional filter!
- If you need to reduce glare and want to use a filter ahead of the focal point (e.g. before a binocular), then the neutral density filters are just right.
- Fine optical polish results in no loss of sharpness at high magnifications even with a filter position 20-30cm in front of the focal point.
- Phantom Group coated. No ghosting, reflections or stray light.
- Threaded both sides of the glass allows combination with other filters (e.g. Baader Colour Filters).
-
# 2957220
€ 365.00 Price excl. German VAT tax (19%): € 306.72- Baader Diamond Steeltrack® (BDS-SC) for Schmidt-Cassegrains (EdgeHD) with 30 mm focus travel
- Minimum height (as supplied – incl. 2" clamp): 93 mm
- Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 82 mm
- Minimum height (with optional S58 ClickLock clamp): 112 mm
- Focuser weight (as supplied – incl. 2" Klemme): 1.040 g (36.7 oz)
- Includes 2" and 3.3" adapter to fit all C14/C11/C9¼/C8/C6/ OTA’s
-
# 2957206
€ 39.00 Price excl. German VAT tax (19%): € 32.77- BDS-Adapter with M68 outer thread to connect M68 parts
- is mounted instead of the standard clamp with the S58 dovetail ring
- Suitable for all Baader Diamond Steeltrack® (BDS) focusers
-
# 2454624
€ 165.00 Price excl. German VAT tax (19%): € 138.66- Fixed focal length of 24mm, 68° field of view – ease of view even at high magnifications!
- High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
- 1¼" and 2" barrels included. Note the 24mm is NOT variable
- Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible
-
From: € 6.50 Price excl. German VAT tax (19%): € 5.46
- Astro T-2 System spacer (Fine-Adjustment) rings, available in thickness 0,3mm (black), 0,5mm (red), 1mm (gold)
- Very thin ring for finetuning in T-2 eyepiece projection
- Rings with T-2 inner diameter without threads
- Fits between all T-2 threads, equals approx. 2/5 (0,3mm), 2/3 (0,5mm) respectively 1 1/3 (1mm) turn of rotation. Rotation may differ slightly.
- Prevents binding between two T-2 threaded parts
-
From: € 89.00 Price excl. German VAT tax (19%): € 74.79
- O-III Super-G filter with 9 nm FWHM and a maximum transmission of 97%.
- For visual and photographic observation of planetary nebulae and supernova remnants, even with small telescopes
- Can be used as a "Super-G filter" replacement for RGB photography. While regular G-filters suffer from bad seeing due to air turbulences, the narrow range of 9 nm passes less thermal noise, i.e. sharper images. Nevertheless, the transmission window is large enough not to be considered a pure narrowband filter.
- CMOS-optimized coating technolog with much steeper slopes of the filter passband - for increased contrast, longer life and to avoid reflections.
-
# 2454826
€ 275.00 Price excl. German VAT tax (19%): € 231.09- Hyperion Universal Zoom Mark IV: fourth generation of Baader-Zoom, 68° Widefield eyepiece with five magnifications - focal lenghts 8, 12, 16, 20 and 24mm clearly defined with "smoothed-out" improved Clickstop Action (a must for effortless binoviewing)
- Long eye relief, perfectly matched to the human eye. Flatfield design – sharp right to the edge of field
- High Quality Phantom Coating™ Group Multicoatings! For faintest objects, maximum contrast and total freedom from reflections
- Large adjustable rubber eyecup, smaller straight rubber eyecup and winged, foldable eyecup included, to fit over M43 photo/video-thread
- M43-Video-Photo thread for afocal and classical projection photography, permits optional adaptation of practically any camera with optional accessories
- Includes 2" and 1¼" barrel, usable for all 1¼" binoculars with detachable eye-rest and spotting scope with 1 3/8" thread (Celestron / Sky-Watcher and others)
-
# 2456317
€ 132.00 Price excl. German VAT tax (19%): € 110.92- Glasspathcorrector Factor 2,6. Optical path length: -120 mm
- Insert diameter: ∅ 38 mm
- Suitable to insert into the Baader MaxBright (Classic and MaxBright® II) or Mark V Großfeld (Giant)-Binocular (#2456410 , € 1425,-)
- A Baader Glaspathcorrector is not a Barlow lens! The reason for this name (in Germany the name Glaswegkorrektor® is a protected trademark by Baader Planetarium) is only secondly the displacement of the focal point
- A Glaspathcorrector is primarily intended to correct the prismatic color fringing that occurs on Refractors due to the high amount of glasses used in binocular prisms
- Please note: The Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) is the only Baader-Bino where you can choose between Zeiss ring-dovetail and T-2 thread adapter.
-
# 2459088
€ 39.00 Price excl. German VAT tax (19%): € 32.77- 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- Also available as set containing of four 36 mm filter holders: 4x filter holder 36 mm for Baader FCCT (3D-printed) (#2459098 , € 134,-)
-
# 2458060
€ 48.00 Price excl. German VAT tax (19%): € 40.34- DT Adapter III, M68a / SP54a extension adapter M68
- Digital T Adapter System III of M68_a on SP54_a Shortest adaptation for Telecentric system or the fluoride Flatfield Converter (FFC).
- This adapter fits to the M68 (Zeiss) ring system - see at FFC (fluorite Barlow) -. Eg to a DSLR camera using the digital T-rings to mount the FFC as short as possible.
-
# 2451101
€ 83.00 Price excl. German VAT tax (19%): € 69.75- Fits C8/9/11" OTAs (base width 44mm) onto Vixen-GP-or Synta-EQ5/HEQ5/6 or Celestron AVX/AS-GT-Mounts
- Only suitable for SC and HD OTAs with flat backplate of the older series. (For Celestron OTAs with new round backplate please use the V-Dove Tail orange anodized, 455mm, drilled for Celestron 9.25“ and 11“ SC / HD (#2451745 , € 85,-) or V-Dove Tail Celestron-orange anodized, 345mm, drilled for Celestron 8“ SC / HD (#2451734 , € 73,-)
- Length = 470mm, with 70mm wider contact surface for the attachment of any tube rings
- Fits for Vixen clamps (and their clones) and for all Celestron mounts and Sky-Wachter mounts
- Black anodized, Weight: 640g
-
# 2458559
€ 323.00 Price excl. German VAT tax (19%): € 271.43- Blaze Reflection Gratings 1200 L/mm
- cemented onto Tilting grating holder
- For high resolution observations where the 900 and 1200 gratings are used, Dados (by construction) is expected to provide the best optical performances in a short spectral range (30 nm).
- It needs to be pointed out to any prospective user up front that the 1200L grating has been addded later on some customers insisting demand, for projects that concentrate mainly on the H-alpha region – to attain max resolution there. The 1200L grating however cannot show the full spectrum and the tilting range is limited to H-alpha mainly. In case this restriction is not acceptable, this grating ought not to be part of an order.
-
# 2458230
€ 53.00 Price excl. German VAT tax (19%): € 44.54- Reducing piece: M68a to M54a for direct connection of M54 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available) ) to the M68 system
- Converts the M68 (Zeiss) female into a M54 male thread
- Telescope side M68 male thread, eyepiece side M54male thread
- Optical length: 5 mm
- Inner diameter: 51 mm, outer diameter: 76 mm
-
# 1508020
€ 31.00 Price excl. German VAT tax (19%): € 26.05- Converts 2" female into 2" male thread
- Internal M48 Filter thread for 2" filter
- Can be used to connect Baader Hyperion Mark III Zoom directly to a Baader Star Diagnol gaining adfitional backfocus by swapping ClickLock-clamp for this adaptor.
-
# 2451661
€ 42.00 Price excl. German VAT tax (19%): € 35.29- V-200 dovetail with centrally milled slots
- Sutiable for Vixen, Celestron, Skywatcher mounts
- Base width 44mm
- Black Anodized, Length: 200mm
-
# 2905009
€ 21.00 Price excl. German VAT tax (19%): € 17.65- Consist of 100ml Optical Wonder™ Cleaning Fluid and Cloth
- Works on all sensitive optical surfaces
- Dislodges dirt, aggressive aetherical oils from pollen and fat – dries up completely without leaving any residue or wipemarks
- cleans without scratching: eyepieces, objective lenses – even mirrors (please see separate instruction)