Methanfilter 1¼" (889nm, 8nm)
Produktdaten
- Artikelnummer2458295
- EAN Code4047825023285
- HerstellerBaader Planetarium
- Nettogewicht (kg)0.01
Verwendung & Eigenschaften
- AnwendungsartCCDPlanetenSpezialfilter
- Einzeln oder im Set?Einzelfilter
Optische Eigenschaften
- DurchlassbereichMethan
- FiltertypNarrowband (Schmalband)
- HWB (Halbwertsbreite)8nm
- Vergütung (Entspiegelung)dielektrisch vergütetplanoptisch poliert
- ZWL (Zentralwellenlänge)889 nm
Mechanische Eigenschaften
- Filterdicke (ohne Fassung)2 mm
- Filterfassunggefasst (ULP 5,5mm)
- Filterformrund
- Filtergröße1 25 inch
Customer Reviews
5.0
100%of customers recommend this product
Teilen Sie uns Ihre Meinung zu diesem Artikel mit!
Top customer reviews
Thomas Klemmer
Ich empfehle dieses Produkt
Sterne
Was this review helpful?10
FAZIT: Die Planetenfotografie wird mit Hilfe von Methanbandfiltern um ein sehr spannendes Spektrum erweitert und eröffnet eine Vielzahl von neuen Möglichkeiten zur Bildgewinnung. Die geringe Signalmenge kann durch die hohe Transmission und den engen Bandpass des Baader Methanfilters gut kompensiert werden, wodurch die Aufnahme mit handelsüblichen Planetenkameras erst sinnvoll wird. Er bietet Hobbyastronomen, die über die klassische RGB Planetenfotografie hinausgehen möchten, eine spannende Alternative...
Den gesamten, ausführlichen Testbericht finden Sie unter dem Tab "Downloads" bzw. hier: http://www.baader-planetarium.com/de/downloads/dl/file/id/472/product/1372/planetenaufnahmen_mit_dem_baader_methanbandfilter.pdf
Andreas Murner
Sterne
Was this review helpful?50
Dear Team Baader-Planetarium,
since I am using your 8nm Methanband Filter (#2458295), I am really looking forward to the new Jupiter season 2017. It gives a different and special view of the giant planet, and I really really like it!
Ok, the image is not that bright, since most cameras are not very sensitive at this wavelength, but when using apertures bigger than 150-200mm one can get stunning views of Jupiter and the other gas giants.
Someone may ask: what is this Methanband filter good for and why is it that narrow?
Images done in Methane-band are looking quite similar to images taken in the infrared part of the spectrum. They are showing deeper and warmer details. Storms like the Great Red Spot shine brightly, while the normal clouds are much darker. The latest impacts into Jupiters atmosphere where also well detectable. The moons appear very bright too, since they reflect the sunlight almost completely. Jupiters normal atmosphere leaks within the Methanband (at 889nm), and reflects almost no sunlight, but allows thermal radiation of lower atmosphere layers to clearly shine through.
The effect is similar on Saturn. The planet itself becomes obviously darker, while the rings remain relativly bright. Also a good opportunity to hunt for faint moons of the giant planets.
There are some other Methanband filters on the market in the meantime, but none of them is as narrow as this Baader-Filter. The problem of broader Methanband filters, e.g. 20nm or 50nm, is the huge amount of obfuscating red light within the desired bandpass. At it's best, a broad Methane filter will only provide a high contrast IR-pass image, but the real Methane-effect will be washed out. All those wider methane-filter-results will show slightly emphasized storms, but again - this can be done with any IR-pass filter just the same.
So, in my eyes, the Baader 8 nm Methane-filter with it's very narrow HBW is absolutley on top. Best in detail and contrast.
www.strehlbuster.com
What are the threads and pitch of your 1.25" and 2" filters?
Anders G. / 20. September 20171 Antwort
- Our 1.25" filters have a M28.5 male (and M28.5 front female) thread / our 2" filters have a M48 male (and M48 front female) thread Both thread sizes come with our proprietary pitch - which is not the same for the female and male threads. This is our own proprietary "emergency solution" for uniting a world were manufacturers all over the world copy from each other - to the point that there are almost a dozen different pitches in use for male and female threads. Traditionally US-companies used to do a UNF-based pitch and the rest of the world went for metric threads - but these do vary from 0.5 to 0.75. For this reason it does not make sense to publish our non standard pitch because our pitch is made to cope with all existing metric and US-pitch standards - and as said - our solution has evolved from sheer necessity. It is a mixture of a queer pitch and under-/over-dimensioning . We will not want to declare this as a standard and get bashed up for it. It works for us and is a result of 20 years adaptation to fit our filters onto all crazy threads we have seen. And inspite of this - every now and then there comes another "dragonboat-eyepiece" were even our filters may not fit...Baader Web Team / 22. September 2017365
35
6




