Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
Auch als Schnäppchen
# 1500202
€ 186.00 Price excl. German VAT tax (19%): € 156.30- Guidescope rings BP II (2 pc)
- With 6 large handknobs with screw and ball bearing tips
- For tube diameter 110 - 160mm
-
# 2459134
€ 30.00 Price excl. German VAT tax (19%): € 25.21- Baader UFC S70 / SP54 (m) Adapter
- telescope-sided SP54 outer thread
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
- allows use of stepper rings to adapt the filter changer to nearly every DSLR-camera
-
€ 645.00 Price excl. German VAT tax (19%): € 542.02- 2" wedge prism according to Herschel - one-sided Phantom Group® anti-reflective coating, with ceramic solar finder and 2" ClickLock® eyepiece holder
- Integrated rotation mechanism for polarising filters – the best method for brightness adjustment in visual solar observation and solar photography in white light
- Stepless brightness adjustment is made possible in combination with the optional
Baader Single Polarizing Filter 2"
(#2408342 , € 72,-)
and the included Neutral Density Filter. The polarizing filters are not included in the scope of delivery
- Including our Baader 7.5 nm Solar Continuum Filter 2" (540nm) (#2961581 , € 198,-) for an uncompromisingly sharp solar image and the Baader 2" Filter Crown Tool (#2458135 , € 35,-) , to make it easier to replace the installed filters.
- S58 dovetail and Safety Kerfs on the 2" nose-piece, New 3-point adjustment system preset in the factory
- Available in visual and photographic versions, please choose from dropdown
-
# 2450317
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Seperate Set of EQ-clamps to mount at the bottom side of the Baader-Stronghold
- Allows the Stronghold to be fixed onto an existing EQ-dovetail bar, while holding on top another EQ-dovetail bar
- Can in addition to the 1x included EQ-clamp of the Strongold Tangent Assembly be mounted on the underside of the Stronghold
- The Stronghold is characterized on an EQ (V) rail are fixed while above an EQ (V) rail terminals
-
# 2458234
€ 47.00 Price excl. German VAT tax (19%): € 39.50- Baader M55a/M68i Adapter - converts a M55 female thread into a M68 female thread
- suitable for all Baader 2" mirrors (# 2456115, 2456117, 2456100) or prisms with female M55 thread (#2456120)
- for largest aperture with 2" star diagonals and makes the adaptation of a M68 quick changer behind the star diagonal possible
-
# 2408336
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Baader Wide-T-Ring Canon R to connect Canon EOS R cameras on the Astro T-2 system and S52 dovetail
- All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
- The illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
- On the camera side: Canon R Bayonet
- Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch
-
# 2454410
€ 27.00 Price excl. German VAT tax (19%): € 22.69- for adaptation of the Alan Gee II to Celestron SC 9,25
- Inner diameter 38mm, suitable for Alan Gee II Telecompressor # 2454400
- Outer diameter 45.5mm
- centers the Alan Gee II telecompressor in the eyepiece socket.Clamping the Alan Gee is done as usual with the Celestron Visual Back or other 2"/ T-2 adapters
-
# 2458665
€ 1,890.00 Price excl. German VAT tax (19%): € 1,588.24- Baches Temperature Control Set for temperature control of the BACHES Echelle spectrograph.
- Sope of delivery:
- BACHES Thermo-Cover (#2458660 , € 425,-) . The CNC milled two-piece housing, protects the spectrograph from fluctuations in the outside temperature at the telescope. Very good thermal insulation is achieved by 20mm wall thickness of weather-resistant EPS rigid foam
- Steeldrive II Controller (#2957260 , € 445,-) controls the temperature compensating Steeldrive II focusing motor for Baader Steeltrack® (Classic and Diamond) focusers and optionally many other focusers
- includes labor times: disassembly of the BACHES, and modification of the housing parts to prepare for Baches Echelle spectrograph
-
# 2408152
€ 27.00 Price excl. German VAT tax (19%): € 22.69- Special Reducer 2" / 1¼" with 4.5mm optical height only
- Suitable for BDS-NT Diamond Steeltrack
- Includes 2" Filterholder (M48 inner thread)
-
# 2957302
€ 6.50 Price excl. German VAT tax (19%): € 5.46- Flat base plate made of ABS, for Sky-Surfer III standard finder
- to mount onto large telescopes
- Single price. Included in scope of supply of Sky Surfer III
-
# 2456095
€ 243.00 Price excl. German VAT tax (19%): € 204.20- T-2/90 ° diagonal prism (BaK4 glass) with 35mm free aperture terminal objective side: 2 "or 1¼"
- Connection eyepiece: 1¼ "
- Prism made in accordance to Zeiss-norms, multi-coated, solid metal case, both sides T-2 connection threads, resulting in extremely short design and adaptable to each telescope system.
- Not just the housing is significantly better and the prism is greater, also the planarity and the conformality of the prism faces are about 5x better than standard prisms in plastic housings.
-
# 2459125
€ 31.00 Price excl. German VAT tax (19%): € 26.05- Baader UFC D58 Dovetail-Receptor Adapter
- Telescope-sided with mounting plate for UFC-Base (screws included)
- Camera-sided with D58 to mount S58 dovetail (screws included) – for correct alignment of the UFC filter slider on all Baader 2" prism and mirror star diagonals
- Can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-)
-
# 2454650
€ 9.00 Price excl. German VAT tax (19%): € 7.56- Hyperion SP 54 thread protection ring
- Material: high quality silicone - non-aging, no chemical softeners, non smelling, not getting brittle over time
-
# 2957263
€ 21.00 Price excl. German VAT tax (19%): € 17.65- Temperature sensor to compensate the drift automatically, if there are large temperature differences
- Temperature sensor with phone connector and 1m cable, also supports control of dew-shield-heating
- Can be used with Steeldrive II motor units or Steeldrive II controller
- One sensor is included in the scope of delivery of the Steeldrive II motor focuser with Controller (#2957165)
-
# 2457555
€ 4.00 Price excl. German VAT tax (19%): € 3.36- Battery 3V Lithium for Celestron Star Pointer, Baader Sky Surfer III / V and Vario-Finder
-
# 2459098
€ 134.00 Price excl. German VAT tax (19%): € 112.61- Set consisting of four pieces 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- 36 mm filter holder also available as single item: 36 mm filter holder for Baader FCCT (3D-printed) (#2459088 , € 39,-)
-
# 2458105
€ 27.00 Price excl. German VAT tax (19%): € 22.69- 1¼" nosepiece with T-2 thread and M28.5 filterholder
- Barrel with 24mm Insertion and securing groove
- Focus side with T-2 external thread telescope side with 1¼ " outer diameter
- Also available as version with Safety-Kerfs and with extra-short T-2 thread (3mm):
Baader 1¼" T-2 nosepiece with Safety Kerfs (#2458106 , € 31,-)
-
# 2451565
€ 315.00 Price excl. German VAT tax (19%): € 264.71- Fits all 3"Losmandy- and (Vixen/Celestron/Skywatcher)EQ-style dovetail bars
- PAN 3 "/ EQ 370, dual prism clamp, suitable for all 3-inch (Losmandy style) and simultaneously for all (EQ-style) dovetail rails Celestron / Vixen / Skywatcher
- With three wide, two-terminal blocks made of brass. Clamping handles flush with the ground surface - therefore fixed everywhere.
- With Allen screw head in the clamp handle (can be tightened with an Allen wrench) having toothed counter surfaces to maximize the points of contact with any track. Prefabricated pre-drilled for a variety of mounts.
- Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)
-
# 2459247
€ 111.00 Price excl. German VAT tax (19%): € 93.28- Required to use the Steplessly variable diaphragm 13 - 113mm (#2459300 , € 366,-)
- Suitable for sizes 75, 90 and 110mm of the Frame for D-ERF Filters 75-180mm (various versions available)
- For optimum adjustment of a telescope aperture when observing with an H-alpha filter of Solar Spectrum (also suitable for other brands)
- Made of CNC-machined aluminum
-
# 2459171
€ 27.00 Price excl. German VAT tax (19%): € 22.69- Baader UFC S70 / M54 (f) Adapter
- Telescope-sided with M54 x 0,75 inner thread
- Camera-sided with S70 dovetail
- Can be adapted via the S70 dovetail to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) as well as to UFC extensions
- Allows the use of the UFC system instead of M54 filter wheels on many common cameras with M54 x 0.75 thread. For this the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and the camera-side M54 adapter Baader UFC M54x0,75 (m) Camera-Adapter (optical height: 2 mm) (#2459117 , € 32,-) are additionally required.
Shop By Brand
Shop By
- Price
- Stock Level
-
- (601)
- (43)
- (90)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (684)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)