Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451107
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen Sphinx mount
- suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
- also fits onto Vixen-, Bresser- or Sky-Watcher tripods
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2954251
€ 31.00 Price excl. German VAT tax (19%): € 26.05- Morpheus® Adapter to convert the Morpheus M43 male top-thread into a SP54 male thread – without adding onto the optical height
- this adapter allows connection of most standard camera-lenses with filter threads to adapt onto each Morpheus®eyepiece, to use the eyepiece for afocal eyepiece projection photography and achieve outstanding planetary images
- for connecting your camera-lens onto the SP54 thread, you need in addition our "Hyperion DT-rings"
- this adapter is exclusively suitable for Morpheus® 76° eyepieces and is not designed to fit the Hyperion or Hyperion-Zoom family of eyepieces because the optical distance must fit for the Morpheus-eyepieces
-
# 2408302
€ 25.00 Price excl. German VAT tax (19%): € 21.01- Baader T-Ring to connect Pentax-K DSLR cameras on the Astro T-2 system
- Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
- On the camera side: Pentax K bayonet
- Telescope side: T-2 internal thread with 0.75mm pitch
-
# 2454307
€ 6.00 Price excl. German VAT tax (19%): € 5.04- SR41W/1.55V 10 pc
- For illuminator
- Not for VarioFinder
-
# 2454833
€ 29.00 Price excl. German VAT tax (19%): € 24.37- converts any 2" (SC) female thread into a T-2 (M42 x 0.75) female thread - without extending the optical length
- initially manufactured to adapt our Hyperion Universal Zoom Mark IV onto any photographic T-2 thread (see animation on the right)
- this adapter can also work as an expansion ring to convert a photographic T-thread into a male 2" SC thread
- suitable for adaptation of any accessory with male T-2 connection thread, e.g. our VariLock 20-29mm and VariLock 29-46mm clamps
- Adapter with continuous 2" male and T-2 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )
-
# 2456415
€ 61.00 Price excl. German VAT tax (19%): € 51.26- for safe storage and transport of the Mark V Großfeld-Binocular
- to upgrade older models. Since 2014 included in scope of supply of the Mark V Großfeld-Binocular
- Also fits for the Maxbright Binokular
-
# 2957304
€ 7.00 Price excl. German VAT tax (19%): € 5.88- Adapter for large telescopes made of ABS, for Sky-Surfer III
- fits onto Celestron, Vixen, Skywatcher-Norm
- Single price. Included in scope of supply of Sky Surfer III
-
# 2456005
€ 110.00 Price excl. German VAT tax (19%): € 92.44- Zenith Prisma T-2/90 ° with 32mm Prism
- Connection objective side: T-2 internal thread
- Connection eyepiece: T-2 external thread
- Excellent for Baader Maxbright binoviewer
-
# 2459136
€ 85.00 Price excl. German VAT tax (19%): € 71.43- Baader UFC S70 RASA 8" telescope adapter to use cameras with 13mm back focus and T-2/M-48 or M54 female thread like the ATIK Horizon on the RASA 8".
- Telescope-sided with RASA 8" thread (M87)
- Camera-sided with S70 dovetail
- Can be adapted via the S70 dovetail to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) as well as to UFC extensions. The UFC adapter is screwed directly onto the RASA 8 thread.
-
# 2958049
€ 19.00 Price excl. German VAT tax (19%): € 15.97- DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
-
# 2957262
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Adapter cable from Steeldrive II Controller AUX Port to Cinch for common heat pads with up to 10W.
- It enables the precise temperature control of e.g. dew shield heaters, optical filters and instruments with of +/-0.1 degree accuracy via the AUX input.
- Connected directly to the Steeldrive controller
- The power can either be set in the SteelGo software, or you set a desired temperature for one of the temperature sensors. This prevents undesired heating of the telescope, because you keep the dew cap just above the dew point.
-
# 2457020
€ 96.00 Price excl. German VAT tax (19%): € 80.67- Multipurpose Quick Release III (MQR III) 7x50 for all 50mm finderscopes with diameter of 62mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
- With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
- You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube
- 4mm hex-wrench included
- With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
- Includes Baader Standard Base
-
# 2958590
€ 90.00 Price excl. German VAT tax (19%): € 75.63- M48 female thread Heavy Duty Quick Changer
- Creates with the Baader M48 Quick Changing Ring (#2958595 , € 52,-) a quick-change and rotating device with the highest load capacity
- Optical path length 11 mm
- Quick release clamping for heavy accessories - with brass-clamping
- The changing system fits between any M48 connection
- 1x Baader Metal M48 Dustcap with dovetail (#2958602 , € 25,-) included
-
# 2958090
€ 21.00 Price excl. German VAT tax (19%): € 17.65- Extension Ring with 11mm optical path length, with threaded protective flap for the SP54 external thread
- Required for the connection of the DT-rings SP54 / M28 and SP54 / M37
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens. Only in this way is a vignetting image illumination possible
- 2 adjusting rings for SP54 thread are free with the purchase at each Hyperion DT-ring.
-
# 2451555
€ 540.00 Price excl. German VAT tax (19%): € 453.78- 8" (203mm) clamp width, gets mounted for example onto 10Micron GM 3000 or GM 4000
- Suitable for 10Micron/Baader 8" dovetail bar #1454540 as well as for Planewave OTA's CDK 17, CDK 20 and CDK 24.
- Pre-drilled on both sides to adapt Baader-Sidewings #2451558. Both sidewings allow the adaptation of balancing baseplates, eg..: Baader Baseplate 400mm #1500340 or Baader Pan EQ clamps 190mm, 230mm, 370mm
-
# 2459213
€ 78.00 Price excl. German VAT tax (19%): € 65.55- DSLR Astro Conversion Filter (Baader-BCF 1)
- Planeoptically polished, with improved spectral transmission
- Fitting for all current Canon APS-C DSLR-Cameras
- List of (partly) older camera models, compatible with BCF-1 filter (no warranty for completeness):
Canon 7D / 40D / 50D / 60D / 70D / 77D / 80D / 100 D / 400D / 450D / 500D / 550D / 600D / 650D / 700D / 750D / 760D / 1000D / 1100D / 1200D / 1300D
-
# 2459197
€ 30.00 Price excl. German VAT tax (19%): € 25.21- Suitable for all UFC systems
- Closes the aperture of UFC and telescopes at the same time to create darks with CMOS Cameras
- Vignettes the optical path 100% when inserted
- STL files for free download are available under TAB Downloads. You only need to login with your customer account or register on our website.
Please note: The download file is licensed under the Creative Commons License CC BY-NC-SA 4.0. You may pass on the file under Attribution © Baader Planetarium GmbH as well as linking the license and indicating any changes. The file may not be used for commercial purposes. If the file is changed, it must be redistributed under the same license.
-
# 1905131
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Stop ring 1¼" for sliding onto 1¼" eyepieces barrel
- Precise adjustment ring with 1¼" inner diameter and two screws
- To fix the insertion or the focal position of the Off-Axis system and other guiding scope systems.
- Effective length 4.8mm
-
# 2451311
€ 477.00 Price excl. German VAT tax (19%): € 400.84- Telescope adapter for telescopes with IR90 - integrated Rotating Focuser to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
- Designed and manufactured in Germany
- Connections on camera side: 120 x 7.5 mm dovetail
- Black anodized
- Optical length: 40.9 mm
- Inner and outer diameter: D120a/ D85i
-
# 2951408
€ 178.00 Price excl. German VAT tax (19%): € 149.58- made of V2A stainless steel
- with CDP = Camera Docking Port, 47,8mm diam., ¼" photo-thread
- Ø160x60mm, bore Ø 40mm – may be extended up to Ø 56mm
- 8,5kg