Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451109
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen AP mount
- suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
- attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition
-
- Classic Baader Slit-Dome for the amateur field, with electronic motor
- Built of hardened and lightweight glassfiber polyester, serves as Wind-, Light- and Weather-protection
- 10 years warranty on Storm-resistance up to 200km/h, many additional features and acccessories available, please ask us
- Dome sizes: 2,1 Meter to 3,2 Meter outer diameter
-
# 6015180
€ 37.00 Price excl. German VAT tax (19%): € 31.09- with 2" bronze pressure ring and 39,5mm length, 60mm outer diameter
- This reducer fits onto every 2" barrel and gets clamped with two M4 screws (without leaving marks on the 2" barrel) This allows clamping of every 2" accessory into focusers with 60mm inner diameter, such as the Pentax-Norm 60mm
-
# 2408331
€ 31.00 Price excl. German VAT tax (19%): € 26.05- Baader Wide-T-Ring to connect Fuji X cameras on the Astro T-2 system
- All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
- Ultra-short Backfocus of only 26 mm (17.7 mm camera, 8.3 mm Wide-T-ring)
- Furthermore, the illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
- On the camera side: Fuji X Bayonet
- Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch
-
# 2451055
€ 399.00 Price excl. German VAT tax (19%): € 335.29- Mit 500 mm optischer Länge und Verschlüssen
- Passend für alle Celestron 14" Schmidt-Cassegrain und EdgeHD Teleskope
- Hilft bei der Vermeidung von Taubildung auf der Schmidt-Platte
- Lange Ausführung zum Schutz vor dem Eindringen von Streulicht in das Tubusinnere
- Stabile Ausführung aus Metall mit zwei Schnellspannern zur einfachen Montage
-
# 1500340
€ 387.00 Price excl. German VAT tax (19%): € 325.21- Sidewing-Baseplate 400mm for Guidescope-Rings, Size III
- Balancing, 400mm long baseplate, fits onto Baader-Sidewings.
- 1kg Baader balancing weights #2951401
-
# 2459114
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Baader UFC Filter Slider / Filter Container 50x50
- suitable for unmounted, square 50x50 mm filters (up to 4mm thick)
- slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
-
From: € 85.00 Price excl. German VAT tax (19%): € 71.43
- Safe for solar observation and photography with all high-end telescopes and extreme tele-lenses. Suitable for highest magnifications and detailed observation of individual sunspots
- AstroSolar Safety Film OD 5.0, mounted stress free in temperature compensated cell
- No astigmatism during winter observation or with temperature changes in summer
- Scope of supply: ASTF Filter with apertures from 80 to 180mm (200 – 280mm not yet available) come with two sets of centering bolts in 38mm length. 3 bolts with 10mm diameter and 3 bolts with 20mm diameter, adjustable to the tube diameter of your telescope or dew cap. In addition three safety straps with glue-pads and three rubber plugs to cover the holes that are not used, mounting instructions.
-
# 2451011
€ 35.00 Price excl. German VAT tax (19%): € 29.41- three steel tips made of hardened steel
- suitable for the Baader T-Pod aluminium tripod
- suitable for stable hold of the tripod on soft ground
-
# 2958553
€ 25.00 Price excl. German VAT tax (19%): € 21.01- Changer / Inverter Ring M48 to T-2 for T-Rings / Adapters with M48 inner thread
- Can be used to combine T-Rings with M48 inner threads with accessories with T-2 outer thread - with the additional Reducing piece S52 / M48 (#2958552 , € 36,-) this ring can be extended to a S52 dovetail
- changes the M48 inner thread of a adapter into a T-2 inner thread
- This inverter ring is also part of the Baader FlipMirror II Star Diagonal (#2458055 , € 228,-) , the Baader Wide-T-Ring Sony E/NEX Bayonet with D52i/M48 to T-2 und S52 (#2408317 , € 41,-) as well as the
-
From: € 34.00 Price excl. German VAT tax (19%): € 28.57
- AstroSolar Photo Film (imaging only), telescope quality, Optical Density OD = 3.8
- Digital solar imaging at highest magnifications and short exposure times. Not suitable for visual observation
- This highest precision film consistently produces strehl ratios of 94 to 96 percent at interferometric tests – thus it performs optically like a Fluorite Triplet Lens by Carl Zeiss or Astro Physics
- AstroSolar Photo Film OD 3.8 is only intended to be used by well-experienced Astro-imagers. This material is not intended to serve for protection during visual solar observation.
-
# 2452280
€ 265.00 Price excl. German VAT tax (19%): € 222.69- Transport case with pre-punched compartment for Baader APO 95
- Robust case made of ABS hard plastic
- With compartments for various accessories
-
# 2458217
€ 133.00 Price excl. German VAT tax (19%): € 111.76- To connect all parts of the Baader M68 System directly to a Celestron or AstroPhysics 3,3" thread
- Suitable for direct connection to a EdgeHD 9¼"/11"/14" and SC 11"/14". Also suitable for Celestron- and Astro Physics-Reducers with 3.3" male thread
- Optical tube length only 7mm, total height of the adapter 17mm (can be threaded completely onto a 10mm long thread, e.g. by most Astro Physics reducers)
- Lens-sided 3.3" female thread, eyepiece-sided M68x1 female thread
-
# 2408300
€ 25.00 Price excl. German VAT tax (19%): € 21.01- Baader T-Ring to connect Nikon DSLR cameras on the Astro T-2 system
- Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
- On the camera side: Nikon bayonet
- Telescope side: T-2 internal thread with 0.75mm pitch
-
From: € 4.50 Price excl. German VAT tax (19%): € 3.78
- Safe solar observation! 100% UV-protection, 100% IR-protection, sun light intensity reduced by 99,999%
- Our Solar Viewer AstroSolar® Silver/Gold – MADE IN GERMANY – safely protect your eyes for visual solar observation. This is THE solution to see the partial phase of Solar Eclipses or even big sunspots with your own eyes!
- Consists of Baader AstroSolar® Silver/Gold Film, with eye-sided reflex-free viewing. Also blocks IR, thus no unpleasant feeling of warmth in the eyeball. Optical Density OD=5,0
- CE / ISO certified: conforms to and meets the transmission requirements for eye safety: EN ISO 12312-2:2015 – Instructions in four languages (English, German, French, Spanish) on the inner side of the solar viewer
- Available in sets of 1pc, 10pc, 25pc, 100pc with counter display, alternatively also available as Bundle: AstroSolar Safety Film and Solar Viewers (various versions available)
-
# 2454636
€ 205.00 Price excl. German VAT tax (19%): € 172.27- Fixed focal length of 36mm Hyperion Aspheric 2" Eyepiece, 72° extreme widefield for large field of view
- High quality Phantom Group Coating for maximum contrast
- DSLR camera adaptable as projection eyepiece, with system thread SP 54
-
# 2458238
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Adapter with M68i x1 to M75a x1 male thread, to adapt M68 parts to Starlight Instruments Feathertouch 3.0" focusers with M75 x 1 female thread
- Changes a M68x1 (Zeiss) male thread into a M75 x 1 male thread
- Part is used in our M75a x 1 ClickLock clamp #2956275
- Optical height: 8 mm, Inner diameter (clear aperture): 67 mm
-
# 2958028
€ 19.00 Price excl. German VAT tax (19%): € 15.97- DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
- SP54i / SP54a extension ring for connection required! (Item #2958090)
-
# 2957311
€ 14.00 Price excl. German VAT tax (19%): € 11.76- Front Jump Cover for SkySurfer V with 0.7 mm sun-seeker bore hole
- Diameter when opened: 42 mm
- Plug-on length: 15 mm
- Included in the scope of delivery of the SkySurfer V #2957315, is suitable for upgrading for an older SkySurfer V model
-
# 2457000
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Standard base viewfinder mounting Pairing MQR III, IV MQR, SkySurfer 5 for mounting on the "second telescope" and for all Vixen-style finderscope mount bases
- The Baader standard basis is milled from solid (no cheaper casting), adjusts all Tubusradien and can be with two screws in the slots - but also with a single screw in the center - absolutely firmly attach.
- The base plate is milled sinusoidal and forms on each tube radius 130-400 mm diameter two linear runs. This provides maximum stability.
- Hole spacing: for attachment onto a telescope OTA, the Baader-Standard-Base has two long-holes of 14 mm length each and 5.3mm width, The middle spacing between both holes is 36 mm. Accordingly the center spacing distance of two 5mm screws may vary from 26 mm to 46 mm