Baader Planetarium

• With rubber grip surface and eyeshield
• eye-friendly ease of viewing - die image will stay visible, even after sligth change of head or telescope position
• 5 lenses in 3 groups, resulting in bright image, absolutely sharp edges, flat image field and correctly place exit pupil
• 35mm focal length, 7x (MC) multi-coated optics

• Baader UFC 2" Filter Slider / Filter Container M48
• suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
• Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side

• suitable for mounts which need a higer voltage of 24V (this cable is equipped with connector for 10Micron GM1000 / GM2000)
• the Baader Planetarium Dual-Mode cable set allows you use two PowerTanks to power those mounts which need 24V, in this case for professional mounts like a 10Micron
• The cable is custom-made and only available directly through Baader Planetarium

• suitable for Celestron CGEM-DX- and CGE-Pro mounts
• Suitable for the  and Baader Hardwood Tripods
• Attention: for Adaptation on Baader Short Pillar III w/o Flange Adapter (#2451150 , € 260,-) the  Universal Base-Ring for Baader Short-Steel-Pillar III (#2451155 , € 61,-) is needed.

• Ultra short 1¼" eyepiece-clamp (w. brass locking ring)
• Optical length: 20mm
• Optimized for guiding camera, w. three set screws for utmost stability and for centering of undersized camera-nosepieces
• adapts onto male T-2 thread
• First introduced as part of our Vario Finder 10x60 – long avaited individual part within the Baader Astro T-2 family of adapters

• Baader Neutral Density Filters ND 0.6 / 0.9 / 1.8 / 3.0.
• For perfect energy management during Lunar and Solar observation. Suitable for solar observing only as an additional filter!
• If you need to reduce glare and want to use a filter ahead of the focal point (e.g. before a binocular), then the neutral density filters are just right.
• Fine optical polish results in no loss of sharpness at high magnifications even with a filter position 20-30cm in front of the focal point.
• Phantom Group coated. No ghosting, reflections or stray light.
• Threaded both sides of the glass allows combination with other filters (e.g. Baader Colour Filters).

• Baader Diamond Steeltrack® (BDS-SC) for Schmidt-Cassegrains (EdgeHD) with 30 mm focus travel
• Minimum height (as supplied – incl. 2" clamp): 93 mm
• Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 82 mm
• Minimum height (with optional S58 ClickLock clamp): 112 mm
• Focuser weight (as supplied – incl. 2" Klemme): 1.040 g (36.7 oz)
• Includes 2" and 3.3" adapter to fit all C14/C11/C9¼/C8/C6/ OTA’s

• Eyepiece set with four Hyperion focal lengths (5, 10, 17, 24 mm), incl. Eyepiece case
• Huge 68 degree wide angle field, tailored to the maximum Visual angle of the human eye
• Phantom group coatings in Zeiss class for complete freedom of reflections and maximum image contrast
• Modular design of the eyepiece body allows modification of the eyepiece focal length with optional finetuning rings
• Camera ready! Almost all DSLR camera bodies can be connected but also simpler fixed lens cameras directly to the Hyperion eyepieces

• converts any 2" (SC) female thread into a M41.5 x 1 female thread - without extending the optical length
• manufactured to adapt our Hyperion Universal Zoom Mark IV straight onto any spotting scope - such as Bausch & Lomb-, Opticron- and Kowa-Base - equipped with M41.5 male thread (see animation on the right)
• Note: for fitting the optical nose of the Zoom into the receptor at some spotting scopes, the thin dust cover ring needs to be removed - see images
• Adapter with continuous 2" male and M41,5 x 1 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )

• Coma corrector for Newton telescopes, that reduces neither the focal length nor the image field of your telescope
• Large lenses for completely vignetting-free exposures up to f / 3.5. Maximum sharpness over the entire image field
• Phantom Coating™ Group multicoated for maximum transmission and total freedom from reflections
• Next to the photographic only version, there is also a visual version that contains all parts of the base elements as well as additional adapters for visual application:
  • 2458400A: Photographic Version with removable 2" Stoppring, usable either with T-2 (M42x0.75) or M48x0.75 connection
  • 2458403: Visual Version (V-1 Set) contains all parts of the photographic Version MPCC Mark III #2458400A as well as 1¼" to T-2 focusing eyepiece clamp (#2458125) and adjustable VariLock T-2 extension tube 20 – 29 mm (#2956929)

Please note: This set replaces the former set #2458402 for visual and photographic application of the MPCC Mark III. The old set consisted of a multitude of rings – but was not adjustable in optical length such as this V-1 set.

The idea for this new and much more versatile set was born after we received this detailed question regarding eyepiece adaptation on MPCC, where we recommended our VariLock and focusing eyepiece clamp as best accessories.

• Tube-Adapter made of ABS, for Sky-Surfer III
• two-piece adapter set, for various lens tube diameters
• Single price. Included in scope of supply of Sky Surfer III

• 2" ClickLock-Clamp and 2" nosepiece.
• Suited for astronomical observation at high magnification
• Hard-silver-coated and protected against aging. Astro quality, manufactured acc. to Zeiss standard

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height: 150 mm

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.

• Length: 250mm (10")
• Black anodized, without holes.
• Weight: 520g

• Apochromatic, multi-coated fluorite lens system
• 10-times higher line resolution than the world best projection eyepieces
• The FFC fits on every T-2 thread and in every 2" focuser

• M48 male thread quick coupler with 50 mm dovetail
• Creates a quick change and rotating device with standard load capacity when coupled with Baader M48 Heavy Duty Quick Changer (#2958590 , € 90,-) , part of Baader Heavy Duty M48 Quick Changing System (#2958593 , € 127,-)
• Quick Changing Ring made from high performance steel
• The changing system fits between any M48 connection
• Optical length: 4mm

• The fringe killer blocks defocused light in the blue spectrum, as well as in the red part of the spectrum (IR) above 700nm, usually seen in small achromat telescopes.
• The smaller details on craters of the Moon and planetary surfaces are so much more visible!
• Planeoptically polished; can be used well before the focal point of the optical system, without any loss of sharpness, as a single filter in front of a binocular for afocal projection with digital cameras.
• Provides the brightest picture of all industrially manufactured colour error-correction systems. Thus, the Fringe-Killer is a must for small refractors!
• Fringe Killer with Celestron 11" Edge HD reducer. Blue fringe reduction - not just for refractors: Celestron Edge + Reducer - some experiences and experiments
  

• Handle for Telescopes
• Includes 2 piece 3" clamps
• to mount onto 3"(Losmandy style) dovetail