Baader Planetarium

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to the Baader conical steel pillar #2451210
• Top plate precision milled flat and threaded to fit the base plate.
• Height 270 mm

• BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• suitable as a pillar adapter flange to the Baader conical steel pillar [product sku="BHP2451220
• Overall height: 100 mm
• The steel pillar flange Steel pillar flange for GM 3000 mount (#1453090 , € 275,-) is needed

• Baader SLOAN-z-s' Bandpass Filter, suitable from f/15 to f/1.8
• SLOAN/SDSS (ugriz’) photometric filter with transmission according to SLOAN-specification
• Manufactured with most advanced ion beam coating technology / Daylight-Proof
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Equally suitable for modern CMOS cameras as well as for older CCD camera technologies

• Baader UFC Filter Slider / Filter Container D50.4
• suitable for unmounted, round 50.4 mm filters (for Filter-Ø 50 mm up to 50,5 mm)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily

• Cone-shaped/octagonal Steel pillar
• Payload capacity up to 600kg
• welded Steel, actively dampening vibrations
• with Internal tube of 3" inner width for cabeling through the pillar and mounting materail
• available in different sizes

• Glasfaserleitung vom BACHES Echelle Spektrograf zur RCU (Remote Control Unit)
• Also includes the control cable in the same respective length
• Available in 3, 15 and 30 Meter length

• Guidescope rings BPIII (2 pc)
• With 6 large handknobs with screw and ball bearing tips
• For tube diameter 140 - 185mm

• Changer / Inverter Ring M48 to T-2 for T-Rings / Adapters with M48 inner thread
• Can be used to combine T-Rings with M48 inner threads with accessories with T-2 outer thread - with the additional Reducing piece S52 / M48 (#2958552 , € 36,-) this ring can be extended to a S52 dovetail
• changes the M48 inner thread of a adapter into a T-2 inner thread
• This inverter ring is also part of the Baader FlipMirror II Star Diagonal (#2458055 , € 228,-) , the Baader Wide-T-Ring Sony E/NEX Bayonet with D52i/M48 to T-2 und S52 (#2408317 , € 41,-) as well as the

• Tube rings 99mm for Baader APO 95mm

• Baader UFC 1¼" AUX-Filter-Holder
• suitable for mounted 1¼" filters
• Requires 1x UFC D50.4 Slider #2459113
• gets mounted into the UFC D50 slider, this slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily

• Baader Polarizing Filter - Ideal filter for solar and lunar observations and contrast enhancement in planetary observations.
• Fits 1¼ or 2" eyepieces/threads and is screwed before the eyepiece
• Adjustable brightness when used with a Baader Hershel Wedge
• Important Note: Polarizer will need additional filtering (eg Herschel Prism or AstroSolar Safety Film) before the eyepiece of the telescope for solar observations.

• suitable for Celestron CGEM mount
• suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
• Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed

• converts any 2" (SC) female thread into a M44 x 1 female thread - without extending the optical length
• manufactured to adapt our Hyperion Universal Zoom Mark IV onto most spotting scopes (see animation on the right)
• Note: for fitting the optical nose of the Zoom into the receptor at some spotting scopes, the thin dust cover ring needs to be removed - see images
• suitable for adaptation to Leica spotting scope with male M44 x 1 connection thread. Also suitable for all M44x1 threads according to the old Zeiss (Jena) standard.
• Adapter with continuous 2" male and M44 x 1 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )

• Adaptor ring with 2" external thread and T-2 external thread
• changes a 2" (50.8mm) inner thread to a T-2 (M42x0.75) outer thread
• Internal 2" (M48) filter thread
• For direct DSLR coupling onto 2" Herschel Wedge/2"Maxbright Diagonal a.o.

• Baader Diamond Steeltrack (BDS-RT) for Refractors with 80 mm focus travel
• Minimum height (as supplied – incl. 2" clamp): 78 mm
• Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 65 mm
• Minimum height (with optional S58 ClickLock clamp): 89 mm
• Focuser weight (as supplied – incl. 2" Klemme): 1.160 g (40.9 oz)
• Adapters available or under development to fit a wide variety of refractor telescopes

Review on Stargazerslounge.com

• Eyepiece set with all seven Hyperion focal lengths (5, 8, 10, 13, 17, 21, 24 mm), incl. Eyepiece case
• Huge 68 degree wide angle field, tailored to the maximum Visual angle of the human eye
• Phantom group coatings in Zeiss class for complete freedom of reflections and maximum image contrast
• Modular design of the eyepiece body allows modification of the eyepiece focal length with optional finetuning rings
• Camera ready! Almost all DSLR camera bodies can be connected but also simpler fixed lens cameras directly to the Hyperion eyepieces

• T-2 (M42x0.75) Locking ring with lever for direct attachment of the MaxBright^® II onto all Baader T-2 star diagonals, be it prisms or mirrors (e.g. to directly couple the body of the Maxbright II with the Baader Prism Diagonal T-2/90° 32mm (#2456005 , € 110,-)
• An Bino auxillary-ring for adaptation of MaxBright® II (#2458272 , € 10,-) is additionally required for adaptation of the MaxBright^® II. The Bino auxillary-ring is placed between the binocular and the T-2 locking ring.
• If the lever of the locking ring comes to rest in an unfavourable position you can still adjust the position of the lever. The lever is only threaded into the ring at the outer circumference. This lever may be threaded into any of the three M4 threads each spaced 120° apart.

• 2" external thread to 1 ¼" internal thread reducter / eyepiece adaptor
• Strong grip with 2 screws and bronze clamp ideal for the heaviest eyepieces or cameras
• Additional T-2 thread on the 1 ¼" side allows connection of camera T-rings or T-2 adapter rings for the eyepiece. A separate T-2 ring protects this thread when not needed
• The telescope side front end includes a 48mm filter thread for 2" filters, and a T-2 thread.

• to connect to Meade instruments with 4" inner threads
• only suitable for BDS-SC Diamond Steeltrack® for SCs