Baader Planetarium

• Turn-key Observatories (2.1 - 8.5 Meter) are available as classic slit-domes or as AllSky domes
• Includes all steps to a fully functional remote (robotic) controlled observatory: Consulting on dome model and building sites, suggestion on equipment such as mount, telescope and accessories, as well as transport, installation and training
• Various electronic features possiple, from classic observatory use over remote controlled use up to fully robotic and autonomical dome
• Customized to your needs, suitable for all kinds of uses, for amateur use but also schools, universities and science

• Baader UFC 2" Filter Slider / Filter Container M48
• suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
• Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side

• Ready to fit Baader filters (standard outfit)
• Incl. large clear aperture 2" nosepiece and convertible T-2/M48 female threads
• Protects the Canon camera body from dust and moisture
• Scope of supply: Protective T-ring for CANON EOS, temperature compensation ring adapter S52 / M48, insert ring M48 / T-2, socket S52 / 2" (without filter)

• suitable for Celestron / Sky-Watcher, EQ-6, NEQ-6 und AZEQ-6 mounts
• suitable for the Baader T-Pod Aluminium tripods 75-110 cm and 95 - 130 cm as well as Baader Hardwood Tripods (discontinued)
• Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed

• Ultra short 1¼" eyepiece-clamp (w. brass locking ring)
• Optical length: 20mm
• Optimized for guiding camera, w. three set screws for utmost stability and for centering of undersized camera-nosepieces
• adapts onto male T-2 thread
• First introduced as part of our Vario Finder 10x60 – long avaited individual part within the Baader Astro T-2 family of adapters

• Baader Neutral Density Filters ND 0.6 / 0.9 / 1.8 / 3.0.
• For perfect energy management during Lunar and Solar observation. Suitable for solar observing only as an additional filter!
• If you need to reduce glare and want to use a filter ahead of the focal point (e.g. before a binocular), then the neutral density filters are just right.
• Fine optical polish results in no loss of sharpness at high magnifications even with a filter position 20-30cm in front of the focal point.
• Phantom Group coated. No ghosting, reflections or stray light.
• Threaded both sides of the glass allows combination with other filters (e.g. Baader Colour Filters).

• unique and extremely versatile telecompressor system that delivers the finest wide flat fields your SCT is capable of
• The result is a sharp, wide, flat field, at a fast focal ratio of f/5.9, optical length <50mm
• Please Note: The close coupling required for the telecompressor to reach focus with binoviewers limits it's use to only the Baader/Zeiss and Celestron binoviewers.

• converts any 2" (SC) female thread into a M41.5 x 1 female thread - without extending the optical length
• manufactured to adapt our Hyperion Universal Zoom Mark IV straight onto any spotting scope - such as Bausch & Lomb-, Opticron- and Kowa-Base - equipped with M41.5 male thread (see animation on the right)
• Note: for fitting the optical nose of the Zoom into the receptor at some spotting scopes, the thin dust cover ring needs to be removed - see images
• Adapter with continuous 2" male and M41,5 x 1 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )

• Coma corrector for Newton telescopes, that reduces neither the focal length nor the image field of your telescope
• Large lenses for completely vignetting-free exposures up to f / 3.5. Maximum sharpness over the entire image field
• Phantom Coating™ Group multicoated for maximum transmission and total freedom from reflections
• Next to the photographic only version, there is also a visual version that contains all parts of the base elements as well as additional adapters for visual application:
  • 2458400A: Photographic Version with removable 2" Stoppring, usable either with T-2 (M42x0.75) or M48x0.75 connection
  • 2458403: Visual Version (V-1 Set) contains all parts of the photographic Version MPCC Mark III #2458400A as well as 1¼" to T-2 focusing eyepiece clamp (#2458125) and adjustable VariLock T-2 extension tube 20 – 29 mm (#2956929)

Please note: This set replaces the former set #2458402 for visual and photographic application of the MPCC Mark III. The old set consisted of a multitude of rings – but was not adjustable in optical length such as this V-1 set.

The idea for this new and much more versatile set was born after we received this detailed question regarding eyepiece adaptation on MPCC, where we recommended our VariLock and focusing eyepiece clamp as best accessories.

• Binocular-Adapter made of ABS, for Sky-Surfer III
• for Binoculars with front tripod thread
• Single price. Included in scope of supply of Sky Surfer III

• Containing: T-2/32 Diagonal with focusing 1¼" eyepiece clamp (#2458125) and 1¼" nose piece (#2458105)
• Connection objective side: T-2 internal thread 1¼ "barrel
• Connection eyepiece: T-2 external thread and focusable 1¼ "eyepiece
• Excellent for Baader Maxbright binoviewer

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height: 150 mm

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.

• Metal Magnet Ring for Homing-Sensor of Steeldrive II - fitting for Baader Diamond Steeltrack® focusers
• If you have upgraded your Diamond Steeltrack® e.g. with a 2" Clicklock S58 eyepiece holder (#2956258) or if you use an adapter to a thread (T-2, M48 or M68), the Metal Magnet Ring is an alternative to the simple magnet holder which is included in the scope of delivery of the Steeldrive II (#2957165).
• The Steeldrive II motor unit features a contactless (wearfree) homing sensor (hall-effect sensor). It is activated by a magnet attached to the moving part of the focuser. It enables precise homing and repeatable approach of saved absolute positions as well as reference of the mechanical endstop.
• The Metal Magnet  Ring is attached between the eyepiece clamp and the eyepiece extension. To install the magnet ring, at first you need to remove the 2" eyepiece holder or the thread adapter for e.g. T-2, M48 or M68. It must be installed parallel to the Steeldrive II.

• Multipurpose Quick Release IV (MQR IV) 9x60 for all 60mm finderscopes with diameters of up 72mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
• With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
• You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube.
• 4 mm hex wrench is included
• With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
• Quick and easily detachable – keeps its position with a precision of up to a hundredth of a millimeter

• M48 male thread quick coupler with 50 mm dovetail
• Creates a quick change and rotating device with standard load capacity when coupled with Baader M48 Heavy Duty Quick Changer (#2958590 , € 90,-) , part of Baader Heavy Duty M48 Quick Changing System (#2958593 , € 127,-)
• Quick Changing Ring made from high performance steel
• The changing system fits between any M48 connection
• Optical length: 4mm

• The fringe killer blocks defocused light in the blue spectrum, as well as in the red part of the spectrum (IR) above 700nm, usually seen in small achromat telescopes.
• The smaller details on craters of the Moon and planetary surfaces are so much more visible!
• Planeoptically polished; can be used well before the focal point of the optical system, without any loss of sharpness, as a single filter in front of a binocular for afocal projection with digital cameras.
• Provides the brightest picture of all industrially manufactured colour error-correction systems. Thus, the Fringe-Killer is a must for small refractors!
• Fringe Killer with Celestron 11" Edge HD reducer. Blue fringe reduction - not just for refractors: Celestron Edge + Reducer - some experiences and experiments
  

• Fits all 3"Losmandy- and (Vixen/Celestron/Skywatcher)EQ-style dovetail bars
• PAN 3 "/ EQ 370, dual prism clamp, suitable for all 3-inch (Losmandy style) and simultaneously for all (EQ-style) dovetail rails Celestron / Vixen / Skywatcher
• With three wide, two-terminal blocks made of brass. Clamping handles flush with the ground surface - therefore fixed everywhere.
• With Allen screw head in the clamp handle (can be tightened with an Allen wrench) having toothed counter surfaces to maximize the points of contact with any track. Prefabricated pre-drilled for a variety of mounts.
• Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)