Baader Planetarium

• BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
• Overall height: 100 mm
• The Steel Pillar Flange for GM 4000 Mount (#1454090 , € 290,-) is required

• RCU (Remote Calibration Unit) for Baches, included 3M fibre optic cable
• Allows wavelenght calibration of the complex BACHES Echelle-Spectrum
• Choose between manual or remote control
• With Thorim-Argon and Halogen lamp with fibre connection

Interactive Website with Calibration examples.

• is set up on a pillar or leveling flange

• Baader UFC S70 / C8 Hyperstar, SC, HD Adapter
• telescope-sided C8 Hyperstar, SC and EdgeHD Adapter
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
• Please note the below description on Hyperstar Adaptation

• Hook and loop cable ties with Baader Planetarium logo
• Reusable and closable cable ties for bundling any kind of objects
• 20 mm x 150 mm
• Scope of delivery: 10 x Baader cable ties

• Baader UFC Filter Slider / Filter Container 50x50
• suitable for unmounted, square 50x50 mm filters (up to 4mm thick)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily

• Safe for solar observation and photography with all high-end telescopes and extreme tele-lenses. Suitable for highest magnifications and detailed observation of individual sunspots
• AstroSolar Safety Film OD 5.0, mounted stress free in temperature compensated cell
• No astigmatism during winter observation or with temperature changes in summer
• Scope of supply: ASTF Filter with apertures from 80 to 180mm (200 – 280mm not yet available) come with two sets of centering bolts in 38mm length. 3 bolts with 10mm diameter and 3 bolts with 20mm diameter, adjustable to the tube diameter of your telescope or dew cap. In addition three safety straps with glue-pads and three rubber plugs to cover the holes that are not used, mounting instructions.

• Allows quick changing of accessories such as Cameras, Spotting Scopes, Binoculars or small telescopes on the Astro & Nature tripod
1x included in Astro & Nature tripod scope of supply

• Changer / Inverter Ring M48 to T-2 for T-Rings / Adapters with M48 inner thread
• Can be used to combine T-Rings with M48 inner threads with accessories with T-2 outer thread - with the additional Reducing piece S52 / M48 (#2958552 , € 36,-) this ring can be extended to a S52 dovetail
• changes the M48 inner thread of a adapter into a T-2 inner thread
• This inverter ring is also part of the Baader FlipMirror II Star Diagonal (#2458055 , € 228,-) , the Baader Wide-T-Ring Sony E/NEX Bayonet with D52i/M48 to T-2 und S52 (#2408317 , € 41,-) as well as the

• AstroSolar Photo Film (imaging only), telescope quality, Optical Density OD = 3.8
• Digital solar imaging at highest magnifications and short exposure times. Not suitable for visual observation
• This highest precision film consistently produces strehl ratios of 94 to 96 percent at interferometric tests – thus it performs optically like a Fluorite Triplet Lens by Carl Zeiss or Astro Physics
• AstroSolar Photo Film OD 3.8 is only intended to be used by well-experienced Astro-imagers. This material is not intended to serve for protection during visual solar observation.

• Varta V675HP 6 pieces
• Fits only the old, silver-colored lighting unit.

• To connect all parts of the Baader M68 System directly to a Celestron or AstroPhysics 3,3" thread
• Suitable for direct connection to a EdgeHD 9¼"/11"/14" and SC 11"/14". Also suitable for Celestron- and Astro Physics-Reducers with 3.3" male thread
• Optical tube length only 7mm, total height of the adapter 17mm (can be threaded completely onto a 10mm long thread, e.g. by most Astro Physics reducers)
• Lens-sided 3.3" female thread, eyepiece-sided M68x1 female thread

• Baader T-Ring to connect Nikon DSLR cameras on the Astro T-2 system
• Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
• On the camera side: Nikon bayonet
• Telescope side: T-2 internal thread with 0.75mm pitch

• STRONGHOLD was developed, to safely and precisely hold accessories, from small finder over guiding scopes up to heave tele-lenses on your main telescope
• Loading capacity: max. 7kg for imaging
• Mounting options (top): 1/4" photo thread, 6pc. M6 threads
• Mounting options (base plate): 1/4" and 3/8" photo threads, 4pc. M6 and 4pc. M5 threads

• Baader USB / RS-232 converter cable (similar to Celestron Item Nr.18775), however, made in Germany
• To connect a device with RS 232 interface to the USB port of a laptop
• Required drivers for Windows, Mac and Linux can be found under the "Downloads" tab

• Adapter with M68i x1 to M75a x1 male thread, to adapt M68 parts to Starlight Instruments Feathertouch 3.0" focusers with M75 x 1 female thread
• Changes a M68x1 (Zeiss) male thread into a M75 x 1 male thread
• Part is used in our M75a x 1 ClickLock clamp #2956275
• Optical height: 8 mm, Inner diameter (clear aperture): 67 mm

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
• SP54i / SP54a extension ring for connection required! (Item #2958090)

• Back Jump Cover for SkySurfer V with yellow glass cover with opaque crosshair reticle and UV/IR blocking filter
• Diameter when opened: 42 mm
• Plug-on length: 15 mm
• Included in the scope of delivery of the SkySurfer V #2957315, is suitable for upgrading for an older SkySurfer V model

• Universal Red Dot Mount RDM – holder for red dot finders with 70 mm height
• All metal design (rail part & base part)
• Weaver gun-rail standard 11mm standard gun rail – fits all Red Dot finders
• V-shaped dove-tail fits most finder-shoes of Celestron, Sky-Watcher, Vixen and Bresser telescopes – can be removed for third party platforms