Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2956951
€ 122.00 Price excl. German VAT tax (19%): € 102.52- Off Axis Guider (BFM-OAG) for direct connection to the Baader FlipMirror II Star Diagonal (#2458055 , € 228,-)
- This is the only prism that can be tuned to actively center a star on the guiding chip.
- Use the BFM-OAG to attach an autoguider camera to a Baader FlipMirror II Mirror Diagonal that works with every position of the mirror.
- The distance between the optical axis and the center of the OAG prism is 17.5mm - once the 4mm spacer ring is removed. This distance provides the largest possible vignetting-free field while retaining all the advantages of the large and movable prism.
- With one or two DT-4 nosepiece extensions #1905130 you can place virtually any camera above the Off-Axis-Guider so that it is parfocal with the recording camera.
- The BFM-OAG is also part of the Off Axis Guider for RCC (RCC-OAG) #2956950
- Requires 24mm back focus on BFM II
-
# 1452070
€ 230.00 Price excl. German VAT tax (19%): € 193.28- Input voltage 220/230 volts, output voltage 25 volts / 10.5 A factory setting
- Why 25V? The control box of 10 Micron mounts can work with 24V up to a maximum of 27V. Since 24V power supplies can occasionally drop below 24V at high loads and low temperatures - which can lead to the failure of the control computer - the power supplies for GM 2000 HPS, GM 3000 HPS and GM 4000 HPS are therefore preset to 25V. This value has proven itself over the years.
- Output via 4mm banana sockets, fitting for the 10 Micron power cables that come with the mount
- Short circuit protection
-
From: € 82.00 Price excl. German VAT tax (19%): € 68.91- Baader 2" ClickLock clamps – available for many brands and sizes
- A small rotation by 20° with gentle fingertip pressure to the knurled lever is enough to securely clamp every 2" accessory.
- Ratchet function – features acoustic and haptic display of the clamp-position. This way you can hear and feel in darkness without looking if the clamp is opened or closed.
- Compression tension-ring of thick-walled hard bronze, keeps its shape even after many years of use and holds expensive accessories securely - without causing scratches or pressure points on your accessories.
- The following 2" Baader ClickLocks are available:
- (please choose from the below dropdown)
- #2956220 SC / HD (2")-Clicklock (5" SC, 6" SC/HD, 8" SC/HD and 9¼" SC)
- #2956233 SCL (3,3")-ClickLock (9¼" HD, 11" SC/HD and 14" SC/HD)
- #2956242 M42i x 0.75-ClickLock (Astro T-2 System)
- #2956248 M48i x 0.75-ClickLock (2" Filter- / Fotogewinde)
- #2956251 M54a x 0,75-2" (TS-Optics / SkyWatcher)
- #2956252 S52-recepter-ClickLock (Baader S52 dovetail-standard)
- #2956253 M54i x 0,75-ClickLock (Bresser / Omegon / Explore Scientific)
- #2956254 M54a x 1-ClickLock (Skywatcher / Orion)
- #2956255 M56i x 0,75-ClickLock (Takahashi)
- #2956256 M56i x 1-ClickLock (Skywatcher / Celestron)
- #2956257 S57-ClickLock (Skywatcher / Celestron)
- #2956258 S58-ClickLock (Baader Diamond Steeltrack)
- #2956260 M60a x 0,75-ClickLock (Vixen)
- #2956263 M63a x 1-ClickLock (for Feathertouch 2.5", TS-Optics)
- #2956264 M64a x 0,75-ClickLock (Takahashi)
- #2956269 M68i x 0,75-ClickLock (Hexafoc: Bresser / Explore Scientific, Omegon)
- #2956268 M68a x 1-ClickLock (Zeiss-norm / Baader M68-System)
- #2956227 2,7"a UNF/24G-ClickLock (Astro Physics)
- #2956272 M72a x 1-ClickLock (Takahashi)
- #2956274 M74i x 1-ClickLock (for Skywatcher Esprit, TS-Optics and Omegon)
- #2956275 M75a x 1-ClickLock (for Feathertouch 3.0")
- #2956284 M84a x 1-ClickLock (Pentax)
- #2956241 4,1"i UNF/24G-ClickLock (Feathertouch / TEC)
- #2956237 37mm ClickLock extension
- #2956247 47mm ClickLock extension
- #2956215 1¼" auf 2" ClickLock expansion
-
# 2451188
€ 535.00 Price excl. German VAT tax (19%): € 449.58- BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Overall height: 100 mm
-
- Turn-key Observatories (2.1 - 8.5 Meter) are available as classic slit-domes or as AllSky domes
- Includes all steps to a fully functional remote (robotic) controlled observatory: Consulting on dome model and building sites, suggestion on equipment such as mount, telescope and accessories, as well as transport, installation and training
- Various electronic features possiple, from classic observatory use over remote controlled use up to fully robotic and autonomical dome
- Customized to your needs, suitable for all kinds of uses, for amateur use but also schools, universities and science
-
# 2459115
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Baader UFC T-2 (m) Thread Adapter
- telescope-sided with mounting plate for UFC-Base (screws included)
- camera-sided with T-2 male thread
- can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and allows camera-sided adaptation of adapters/cameras with T-2 female threads
-
# 2450050
€ 37.00 Price excl. German VAT tax (19%): € 31.09- US-Norm Allen wrench keySet, precision quality with ball-head
- The complete set includes the following allen wrench keys: 5/16 - 1/4 - 7/32 - 3/16 - 5/32 - 9/64 - 1/8 - 7/64 - 3/32 - 5/64 - 1/16 - 0,05 inch
-
# 2459119
€ 30.00 Price excl. German VAT tax (19%): € 25.21- Baader UFC S52 Adapter
- telescope-sided with mounting plate for UFC-Base (screws included)
- camera-sided with S52 dovetail for the Baader Protective EOS T-Ring or all Baader Wide-T-Rings
- can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and allows camera-sided adaptation of adapters/cameras with S52 dovetail receptor clamps
-
From: € 93.00 Price excl. German VAT tax (19%): € 78.15- Baader CMOS RGB-B (400 – 510 nm) Bandpass Filter, suitable from f/15 to f/1.8
- Anti-reflection RGB filter (red/green/blue) with extremely high transmission of the respective color channel, thus simultaneously reducing stray light and reflections to an unprecedented level
- Balanced RGB design allows subframes to be taken with the same exposure time – extremely important for automated imaging tasks
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
-
# 2451155
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Universal Base ring: fits Baader Tripod-Adapters onto short Steel-Pillar III
- Hole diameter 77mm, 6x M5 inner threads
-
# 2459123
€ 60.00 Price excl. German VAT tax (19%): € 50.42- optical height: 2 mm
- telescope-side with mounting plate for UFC-Base (screws included)
- camera-side with M72 outer (male) thread (e.g. for Starlight Xpress cameras)
- can be adapted via the included screws and the mounting plate to the UFC filter base #2459110 and enables to mount the UFC-main body in front of any camera lens with (female) M72 front filter thread
-
# 2408329
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Baader T-Ring to compact cameras with 4/3 on the Astro T-2 system
- Allows the connection of lenses with 55mm back focus.
- Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
- On the camera side: Four-Thirds connection (not Micro), telescope side: T-2 internal thread with 0.75mm pitch
-
# 2451558
€ 689.00 Price excl. German VAT tax (19%): € 578.99- Baader sidewings are connected to the side (left, both sides or right) of the 8" Planewave terminal #2451555.
- Side plates/clamps can be placed on the sidewings, eg: Baader base plate 400mm # 1500340 or Baader Pan EQ clamps 190mm, 230mm and 370mm
-
# 2454613
€ 165.00 Price excl. German VAT tax (19%): € 138.66- Fixed focal length of 13mm, 68° field of view – ease of view even at high magnifications!
- High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
- 1¼" and 2" barrels included, thus variable focal lengths
- Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible
-
# 2454836
€ 33.00 Price excl. German VAT tax (19%): € 27.73- Connection ring M54/M53 for Kowa TSN 770/880 Spotting Scopes
- enables connection of the Baader Hyperion Universal Zoom Mark IV to KOWA Spotting Scopes with M54 male thread
- Spotting-Scope-sided with M54 female thread
- Eyepiece-sided with M53 female thread
-
From: € 495.00 Price excl. German VAT tax (19%): € 415.97- Baader MaxBright® II Binoviewer with adapters to T-2 and Zeiss micro-bayonet in a padded carrying case
- With further accessories to connect it to any telescope with shortest possible mechanical distance
- Available with T-2 90° star diagonal (32mm Baader prism), Classic Ortho eyepieces, various adapters and glasspath correctors in the set, depending on the application.
- Please select the appropriate set below for further technical details
-
# 2957283
€ 39.00 Price excl. German VAT tax (19%): € 32.77- to connect to Skywatcher Refractors with M90x1 outer threads
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
- Also fits RC telescopes with M90 thread, but may require an extension, otherwise the BDS-RT Steeltrack may not retract completely. See also the application picture and the following review of the BDS-RT Steeltrack: Fitting a 2-inch BDS-RT Baader Diamond Steeltrack Focuser to a Teleskop-Service GSO 8-inch Ritchey-Chretien
-
# 2456314Z
€ 122.00 Price excl. German VAT tax (19%): € 102.52- Glasspathcorrector Factor 1,25. Optical path length: ≥ -30 mmInsert diameter: ∅ 38 mm
- Suitable to insert into the Baader MaxBright® II Binoviewer or Mark V Großfeld (Giant)-Binocular (#2456410 , € 1425,-)
- A Baader Glaspathcorrector is not a Barlow lens! The reason for this name (in Germany the name Glaswegkorrektor® is a protected trademark by Baader Planetarium) is only secondly the displacement of the focal point
- A Glaspathcorrector is primarily intended to correct the prismatic color fringing that occurs on Refractors due to the high amount of glasses used in binocular prisms
- Please note: The Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) is the only Baader-Bino where you can choose between Zeiss ring-dovetail and T-2 thread adapter.
-
# 2459070
€ 295.00 Price excl. German VAT tax (19%): € 247.90- Filter changer and Tilter (mechanical image position corrector), specially designed for Celestron RASA 8" Astrograph and large QHY cameras with 77 mm diameter (e.g. QHY 174 / 163 / 183)
- The Baader FCCT (Filter Changer Camera Tilter) allows the use of filters as well as the adjustment of camera plus filter to the optical path
- With the FCCT, a very fast adjustment or finest readjustments are possible - without having to unscrew the camera each time. This makes working with the RASA 8 a pleasure
- 3D-printed filter sliders are available for the FCCT, which exclusively accommodate unmounted filters with diameters of 31 mm / 36 mm and 2" (w/o cell)
- We offer selected 2" filters specifically for the FCCT in an unmounted variant, but basically all Baader 2" filters will work when removed from the filter cell
-
From: € 90.00 Price excl. German VAT tax (19%): € 75.63- Baader IR-Pass Filer HWB 685nm
- Reduces the effect of seeing resulting in a much sharper image.
- Tip for use: Ideal for imaging and used for the luminosity channel.
- The effect of use: The normal spectral bandwidth is 400-700nm. This filter starts at 670nm in the deep red, just in the visual range so it can be focussed correctly. At this long-wavelength spectral range the atmospheric air turbulence (seeing) has much lower impact on the sharpness. Dark structures on Mars, Jupiter the Moon and the Sun are thereby rendered much sharper. The luminosity can then be combined with RGB creating a very sharp LRGB image.
- Highly recommended for any planetary imager.
- Reflex free anti-reflective and optically polished.
Shop By Brand
Shop By
- Price
- Stock Level
-
- (597)
- (39)
- (97)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (685)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)