Baader Planetarium

• optical height: 2 mm
• telescope-side with mounting plate for UFC-Base (screws included)
• camera-side with M72 outer (male) thread (e.g. for Starlight Xpress cameras)
• can be adapted via the included screws and the mounting plate to the UFC filter base #2459110 and enables to mount the UFC-main body in front of any camera lens with (female) M72 front filter thread

• Baader T-Ring to compact cameras with 4/3 on the Astro T-2 system
• Allows the connection of lenses with 55mm back focus.
• Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
• On the camera side: Four-Thirds connection (not Micro), telescope side: T-2 internal thread with 0.75mm pitch

• Baader Diamond Steeltrack (BDS-RT) for Refractors with 80 mm focus travel
• Minimum height (as supplied – incl. 2" clamp): 78 mm
• Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 65 mm
• Minimum height (with optional S58 ClickLock clamp): 89 mm
• Focuser weight (as supplied – incl. 2" Klemme): 1.160 g (40.9 oz)
• Adapters available or under development to fit a wide variety of refractor telescopes

Review on Stargazerslounge.com

• Fixed focal length of 5mm, 68° field of view – ease of view even at high magnifications!
• High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
• 1¼" and 2" barrels included, thus variable focal lengths
• Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible

• Connection ring M54/M53 for Kowa TSN 770/880 Spotting Scopes
• enables connection of the Baader Hyperion Universal Zoom Mark IV to KOWA Spotting Scopes with M54 male thread
• Spotting-Scope-sided with M54 female thread
• Eyepiece-sided with M53 female thread

• Baader MaxBright^® II Binoviewer with adapters to T-2 and Zeiss micro-bayonet in a padded carrying case
• With further accessories to connect it to any telescope with shortest possible mechanical distance
• Available with T-2 90° star diagonal (32mm Baader prism), Classic Ortho eyepieces, various adapters and glasspath correctors in the set, depending on the application.
• Please select the appropriate set below for further technical details

• to connect Refractors with 97mm inner diameter
• fitting for many Synta and Celestron tubes
• only suitable for BDS-RT Diamond Steeltrack® for Refractors

• T-2/90° Baader Roof-Prism. Manufactured by Zeiss standard, both sides with T-2 system threads
• This Prism is multicoated and built in a solid metal body. T-2-thread on both sides, therefore extremely short and adaptable on every telescope-system.

• Filter changer and Tilter (mechanical image position corrector), specially designed for Celestron RASA 8" Astrograph and large QHY cameras with 77 mm diameter (e.g. QHY 174 / 163 / 183)
• The Baader FCCT (Filter Changer Camera Tilter) allows the use of filters as well as the adjustment of camera plus filter to the optical path
• With the FCCT, a very fast adjustment or finest readjustments are possible - without having to unscrew the camera each time. This makes working with the RASA 8 a pleasure
• 3D-printed filter sliders are available for the FCCT, which exclusively accommodate unmounted filters with diameters of 31 mm / 36 mm and 2" (w/o cell)
• We offer selected 2" filters specifically for the FCCT in an unmounted variant, but basically all Baader 2" filters will work when removed from the filter cell

• Baader IR-Pass Filer HWB 685nm
• Reduces the effect of seeing resulting in a much sharper image.
• Tip for use: Ideal for imaging and used for the luminosity channel.
• The effect of use: The normal spectral bandwidth is 400-700nm. This filter starts at 670nm in the deep red, just in the visual range so it can be focussed correctly. At this long-wavelength spectral range the atmospheric air turbulence (seeing) has much lower impact on the sharpness. Dark structures on Mars, Jupiter the Moon and the Sun are thereby rendered much sharper. The luminosity can then be combined with RGB creating a very sharp LRGB image.
• Highly recommended for any planetary imager.
• Reflex free anti-reflective and optically polished.

• Length: 350mm (14")
• Black anodized, without holes.
• Weight: 720g

• Schott RG 830 substrate with super stack dielectric coating
• for pure methane band transmission
• non-ageing sealed coating edges

• Nosepiece with Baader proprietory Safety Kerfs grooves so that even the heaviest accessories cannot fall to the ground
• Equipped with only 3 mm long T-2 thread
• Eyepiece-/camera side with male T-2 and M48 threads
• Telescope side with 2" outer diameter and 48mm filter thread for 2" filters
• Effective optical length 3 mm
• Also available as version without Safety-Kerfs and with longer T-2 thread (5mm):
  Baader 2" nosepiece to T-2 / M48 (T-2 part #16) (#2408150 , € 40,-)

• Baader U-Filter (Venus and UV) 350nm.
• Transmission peak approx. 80% at 350nm, bandwidth 60nm (320-380nm), completely blocking the entire spectral range from 200nm to 1120nm.
• Dielectric multi-coating on optically polished Schott Glass.
• Enables imaging in the deep UV spectral region. A "breakthrough" for imaging the planet Venus! Allows amateur astronomers to capture cloud structures of the Venusian atmosphere.
• Successful astro-application of this filter requires a suitable UV-sensitive lucky imaging camera module (i.e. SKYRIS 274M) with at least a telescope of 5" diameter (a telescope with an 8" diameter is recommended).
• Non-astronomical applications possible: e.g. check for paint damage on cars or state of health of plants and much more. Read more in the detailed description or with a translate tool on this (german) test review: Baader-U" in the "terrestric" Photography

• Handle for telescopes
• Includes 2 piece V clamp
• to mount onto EQ-5/HEQ-5 dovetail

• gets mounted eyepiece-sided directly onto the SolarSpectrum filter and reduces the previously by the telecentric system extended focal length again by a factor of 0.7
• Working distance: 110mm (Distance to the camera sensor)
• 2" male threads on both sides, fitting Universal Flange Adapter #2958240 (included with SolarSpectrum H-alpha filters
• Telecompressor is used to adjust the focal length to possibly poor seeing conditions and / or enlarging the field for photographic- or webcam applications

• Replacement part for fixing the electrically driven solar system (tellurium) of The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.

• 3.3" thread for C11 and C14
• For connecting the Baader 2" Deluxe Clamping Eyepiece Holder (T-2 part #17) (#2408140 , € 58,-) to C11 and C14 telescopes
• A clear 50mm aperture
• No vignetting when used on C11 and C14 telescopes

• 37.5 mm Extension for the IR90  - Integrated Rotating Focuser from PlaneWave to the telescope to gain more backfocus for the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
• Developed and manufactured in Germany   
• Connections on telescope side: PW focuser LK200 5/16 pitch18 UNC 
• Optical length: 37.5mm
• Inner and outer diameter: 215 mm x 43 mm