Baader Planetarium

• Available again for a limited time: Carl Zeiss 1¼" Abbe Barlow lens with T-2 thread made in Germany by Carl Zeiss in Jena – with 1¼" / T-2 ClickLock eyepiece clamp by Baader Planetarium
• visual Barlow lens and photographic eyepiece projection in one system
• Direct T-2 Adaption possible - extends magnification up to 3x - without loss of quality
• The image quality is only exceeded by our 3x-8x flat field FFC-Converter, in case the projection factor exceeds 3x

• Improved version of former MX-Mount
• Artistry, vision and all the performance of a professional grade mount
• Designed to make observatory quality astronomy – field portable
• Control system of 4th generation, featuring USB 2.0 computer to mount interface

• High-precision, temperature-compensating focusing motor with toothed belt drive for heavy loads (up to 8 kg).
• Prepared for connection to all Baader Steeltrack® focusers (classic and Diamond).
• Contactless end sensor (homing switch) for precise, repeatable positioning to stored absolute positions
• Incl. hand controller with intuitive operation, can alternatively be controlled via PC with USB interface via ASCOM or SteelGO software (for Windows)
• Connection for temperature sensors and additional 12 V / 1A PWM current output, e.g. for dew cap heater

• Input Voltage 110-240 volts, output voltage 24 V / 5 amps (factory setting)
• Connection cable fitting for GM 1000 HPS mount
• Short circuit protection

• Baader UFC 2" (m) SC-Thread Adapter
• telescope-sided with mounting plate for UFC-Base (screws included)
• camera-sided with 2" male thread
• can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and allows camera-sided adaptation of adapters/cameras with 2" SC female threads

• Additional Shelf for tray, requires Shelf for Baader Steel Pillar BMP/BHP (#2451208 , € 143,-)
• Suitable for Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available) and Baader Medium Pillar (BMP), modal steel pillar with up to 250 kg payload capacity (available in 60 - 165 cm) (various versions available)

• Sun replacement halogen bulb - without socket.
• Custom made with sprue spigot at the bottom to allow projection. This bulb is not freely available in stores.
• Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
• Please use only this bulb, otherwise you may destroy the transformer of the device, which due to its size can not output more light power. For continuous operation (3 hours and more), the medium light level must be used.

• Ultra short 1¼" eyepiece-clamp (w. brass locking ring)
• Optical length: 20mm
• Optimized for guiding camera, w. three set screws for utmost stability and for centering of undersized camera-nosepieces
• adapts onto male T-2 thread
• First introduced as part of our Vario Finder 10x60 – long avaited individual part within the Baader Astro T-2 family of adapters

Previous version – no longer available

• 2 ", 23 ° Safety Herschel Prism, utilizing special Phantom Group® coatings for glare control. 2” ClickLock® eyepiece holder.
• There is no better and safer method for uncompromising sharp solar observation / photography in white light.
• A special heat absorbing ceramic element traps radiant heat similar to the space shuttle heat tiles - without heating the surrounding area too. The fully enclosed housing adds to the safety and prevents the risk of glare.
• Please choose version from dropdown to see scope of supply

• suitable for Vixen Sphinx mount
• suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
• also fits onto Vixen-, Bresser- or Sky-Watcher tripods
• Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed

• converts any 2" (SC) female thread into a T-2 (M42 x 0.75) female thread - without extending the optical length
• initially manufactured to adapt our Hyperion Universal Zoom Mark IV onto any photographic T-2 thread (see animation on the right)
• this adapter can also work as an expansion ring to convert a photographic T-thread into a male 2" SC thread
• suitable for adaptation of any accessory with male T-2 connection thread, e.g. our VariLock 20-29mm and VariLock 29-46mm clamps
• Adapter with continuous 2" male and T-2 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )

• Converts 2" female into 2" male thread
• Internal M48 Filter thread for 2" filter
• Can be used to connect Baader Hyperion Mark III Zoom directly to a Baader Star Diagnol gaining adfitional backfocus by swapping ClickLock-clamp for this adaptor.

• Z.B. zur Okularprojektion mit Schiebefokussierer
• Teleskopseitig T-2 Innengewinde
• Kamera-/Okularseitig T-2 Außengewinde
• In verschiedenen Längen erhältlich

• SR41W/1.55V 10 pc
• For illuminator
• Not for VarioFinder

• Baader M68a x 1 to FLI adapter flange
• telescope-sided with M68 (Zeiss) male thread, to connect all parts of the Baader/Zeiss M68 System
• camera-sided with Flange to connect FLI-ML and FLI-PL cameras
• Optische height: 10,5 mm, Inner diameter (clear aperture): 64 mm

• Special Reducer 2" / 1¼" with 4.5mm optical height only
• Suitable for BDS-NT Diamond Steeltrack
• Includes 2" Filterholder (M48 inner thread)

• Flat base plate made of ABS, for Sky-Surfer III standard finder
• to mount onto large telescopes
• Single price. Included in scope of supply of Sky Surfer III

• Zenith Prisma T-2/90 ° with 32mm Prism
• Connection objective side: T-2 internal thread
• Connection eyepiece: T-2 external thread
• Excellent for Baader Maxbright binoviewer

• Converts an M48 (Zeiss) female thread in an M48 male thread
• Total length of 8.8 mm with an optical length of 0.8 mm
• Made of hardened, stainless steel
• This adapter is included in the scope of delivery of the Baader FlipMirror II Star Diagonal (#2458055 , € 228,-)