Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2456314
€ 122.00 Price excl. German VAT tax (19%): € 102.52- Glasspathcorrector Factor 1,25. Optical path length: ≥ -30 mm
- Insert diameter: ∅ 38 mm
- Suitable to insert into the Baader MaxBright (Classic and MaxBright® II)
- A Baader Glaspathcorrector is not a Barlow lens! The reason for this name (in Germany the name Glaswegkorrektor® is a protected trademark by Baader Planetarium) is only secondly the displacement of the focal point
- A Glaspathcorrector is primarily intended to correct the prismatic color fringing that occurs on Refractors due to the high amount of glasses used in binocular prisms
- Please note: The Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) is the only Baader-Bino where you can choose between Zeiss ring-dovetail and T-2 thread adapter.
-
# 2459085
€ 40.00 Price excl. German VAT tax (19%): € 33.61- 3D-printed filter holder for unmounted 2" (Ø 47,4 mm) Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- We offer selected 2" filters especially for the FCCT in an unmounted variant, but basically all Baader 2" filters work when removed from the filter cell
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- Also available as set containing of four 2" filter holders: 4x filter holder 2" (Ø 47,4 mm) for Baader FCCT (3D-printed) (#2459095 , € 137,-)
-
# 2958043
€ 19.00 Price excl. German VAT tax (19%): € 15.97- for DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
-
# 1501620
€ 129.00 Price excl. German VAT tax (19%): € 108.40- Length: 530mm (20,5")
- Black anodized, without holes.
- Weight: 1070g
-
# 2458392
€ 180.00 Price excl. German VAT tax (19%): € 151.26- 1¼" Double Stacked Baader Solar Continuum Filter. 8nm / CWL 540nm.
- Includes 1x AstroSolar® Photo Film OD 3.8 20x29 cm. The filter includes two Baader Solar Continuum Filters in a single filter cell which have been stacked for even higher contrast.
- Enhances the contrast and reduces the effect of atmospheric turbulence.
- This filter must be used in conjunction with a Baader Herschel Wedge or Baader AstroSolar® Safety Film 5.0 (not included) for solar observations otherwise equipment damage may occur. The included Baader AstroSolar® Photo Film 3.8 must not be used for visual observation but only for solar photography (e.g. lucky imaging).
-
# 2459211
€ 85.00 Price excl. German VAT tax (19%): € 71.43 -
# 2459095
€ 137.00 Price excl. German VAT tax (19%): € 115.13- Set consisting of four pieces 3D-printed filter holder for unmounted 2" (Ø 47,4 mm) Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- We offer selected 2" filters especially for the FCCT in an unmounted variant, but basically all Baader 2" filters work when removed from the filter cell
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- 2" filter holder also available as single item: 2" (Ø 47,4 mm) filter holder for Baader FCCT (3D-printed) (#2459085 , € 40,-)
-
# 1508039
€ 22.00 Price excl. German VAT tax (19%): € 18.49- M 36.4 is standard of Vixen telescopes
- Telescope side external thread 36.4mm
- Focuser side T-2 external thread (direct T-2 photo thread for Vixen, NexStar 4, Meade etc...)
- Optical path length = 0.5 mm
-
# 2957297
€ 108.00 Price excl. German VAT tax (19%): € 90.76- Adapter to connect the 2" BDS-SC Baader Diamond Steeltrack® Focuser (#2957220 , € 365,-) onto M48-threads
- only suitable for BDS-SC Diamond Steeltrack® focuser
- optical length: 35 mm
-
# 2951403
€ 104.00 Price excl. German VAT tax (19%): € 87.39- made of V2A stainless steel
- Ø 140x30mm, bore Ø 28,7mm
- 3 kg
-
# 2000301
€ 376.00 Price excl. German VAT tax (19%): € 315.97- hand-painted globe with graduation and moon on a chrome ring with a gear box.
- The gear regulates the following four functions
- The earth rotating around its own axis (rotation)
- Earth's axis pointing towards the celestial poles
- The motion ofthe moon around the earth
- The shifting ofthe lunar nodes. It causes that the position of the chromed ring in which the moon runs - the imaginary position of the moon's orbit to the earth changes according to the conditions in nature
- Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
-
# 2408195
€ 48.00 Price excl. German VAT tax (19%): € 40.34- Eyepiece barrel 1¼ "with 36.4mm outer thread
- Telescope side with 36,4mm outer thread
- Focus side 1¼ "internal diameter
- To connect 1¼ "eyepieces to Vixen - Takahashi and Lichtenknecker Okularauszüge
-
# 2957270
€ 115.00 Price excl. German VAT tax (19%): € 96.64- Adapter set to connect the Steeldrive II Motor Unit (#2957265 , € 275,-) to the FeatherTouch 3.5" focuser from Starlight Instruments
- Allows motorized fine drive of the FT 3.5" OAZ with the Baader Steeldrive II motor unit for heavy loads (up to 8 kg)
- Please note:: The motor unit requires the Steeldrive II Controller (#2957260 , € 445,-) . You always need one controller to operate one motor unit. But you can use one controller with several motor units one at a time – you only need to plug it into the motor unit which you want to use. The Steeldrive II Motor with Controller is also available as Set: Steeldrive II motor focuser with Controller (#2957165 , € 665,-)
-
# 2956180
€ 133.00 Price excl. German VAT tax (19%): € 111.76- Specially created for Hyperion ClickStop Zoom Mark III
- Result in a focal length range of 3,5 to 10,5 mm
- Modular Design: usable for many applications (visual and photographic)
-
From: € 47.00 Price excl. German VAT tax (19%): € 39.50- M68 extension tube for classic eyepiece projection or Fluoride Flatfield Convertors (FFC)
- Telescope side M68x1 male thread
- Eyepiece-/camera side M68x1 female thread
- High-quality Aluminum, available in different lengths
-
# 2458102
€ 14.00 Price excl. German VAT tax (19%): € 11.76- Altogether 15 pc - in 5 sizes, three rings per size (thickness 0.6/0.8/1.0/1.2/1.4mm)
- Well suited to tune the rotary position of all kinds of T-2 accessories in approx 90° increments, to move locking screws of eyepiece holders into a comfortable position asf.
- Also helps to prevent binding when used as spacer between two metal surfaces connected w. T-2 thread
-
From: € 250.00 Price excl. German VAT tax (19%): € 210.08- Baader S-II f/3 Ultra-Highspeed Filter – Premium Grade
- 4 nm FWHM, recommended for fast optical systems from f/3.4 to f/2.3
- Specially designed for the special filter requirements when used with fast f/3 optics
- For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
-
# 2457630
€ 68.00 Price excl. German VAT tax (19%): € 57.14- for larger Celestron-Mounts
- Made for outdoor application, water resistant sealed housing. Usable in temperatures from -25°C up to 40°C
- input voltage 100-240V, Output 12.8V / 5A 60W
- Protective-disconnect ellbowed plug German design and quality with EU-wall plug
-
Baader H-alpha 2" unmounted (Ø 47,4 mm) f/2 Ultra-Highspeed-Filter (3.5nm) for FCCT – CMOS-optimized
# 2961378U
€ 418.00 Price excl. German VAT tax (19%): € 351.26- 47.4 mm (2" w/o cell) x 2 mm Baader CMOS H-alpha f/2 Ultra-Highspeed Filter – Premium Grade
- 2" Filter removed from filter cell, specially selected for use with 2" Filter sliders of the Baader FCCT (Filter Changer Camera Tilter) for RASA 8" and QHY cameras (various versions available)
- 3.5 nm FWHM (to harmonize the exposure time with O-III / S-II), recommended for extremely fast optical systems from < f/2.3
- Specially designed for the special filter requirements when used with extremely fast f/2 optics like the Celestron RASA astrographs
- For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
-
# 2458221
€ 49.00 Price excl. German VAT tax (19%): € 41.18- Adapter 2.7"i UNF/24G (Astro Physics) to M68a x 1 (Zeiss)
- Reducing piece: converts an AP 2.7” male thread to an M68 x1 male thread
Shop By Brand
Shop By
- Price
- Stock Level
-
- (604)
- (34)
- (94)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (685)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)