Product Questions and Answers
Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".
- Description
-
Details
DADOS® - a slit spectrograph made by Baader
developed at the Max-Planck-Institute for Extraterrestrial Physics in Garching
The first draft of the DADOS®-slit spectrograph was based on our simple Blaze grating, which we had made for schools for more than 20 years. When we unveiled the prototype of the DADOS® some years ago, we listened closely to the following online-discussions, which lead to several large changes in the design of the product.
So, many ideas and critics from active spectroscopists were incorporated in the design of the DADOS®. We are very grateful for all feedback, because we are sure that the final product has become much better because of this.
DADOS® is designed for telescopes with about f/10 or slower. Faster apertures will cause some vignetting. The spectral resolution is not affected by this in any way.
DADOS Slit Spectrograph – scope of delivery
- DADOS Reflection Grating with 200 lines / mm, cemented onto tilting grating holder
- DADOS 1¼" Eyepiece 20 mm Kellner # 1304120
- DADOS 1¼" Guiding Eyepiece 10 mm Kellner # 1304110
- T-2 Quickchanger # 2456313 + # 2453620
- Focusing Ring Collar 1 1/4" # 1905131
- Focusing Eyepiece Holder 1¼" # 2458125
- Allen Key 1.3 mm and 1.5mm
- Slit-viewer unit
- Gloves
- Storage case and Manual
Note: The DADOS comes with a 200-line grating as standard. A grating with 900 lines or 1200 lines can be ordered for an extra charge. If you need additional gratings for your DADOS, these have to be ordered separately (and especially optically adjusted for this device). If you already own a DADOS, we must ask you to return your DADOS each time to us when you order another grating, apart from the standard 200 line grating. The initial calibration of the grating in relation to the mechanical body of the DADOS must be one here one time.
DADOS Reflection Grating
Nowadays, we use the following three reflection gratings (200 L/mm as standard, 900 L/mm and 1200 L/mm sold seperately) which are copies of special master gratings (they are no standard gratings from a catalogue!) - the Blaze angle of the gratings (as well as the optics, see below) is matched perfectly to the geometrical and optical properties of the DADOS®.
- #2458557 Reflection Grating with 200 lines/mm, cemented onto tilting grating holder
- #2458556 Reflection Grating with 900 lines/mm, cemented onto tilting grating holder
- #2458559 Reflection Grating with 1200 lines/mm, cemented onto tilting grating holder
The desired wavelength range can be set with a micrometer gauge. A sturdy T-2 connector for large CCD-cameras (e.g. SBIG) or several adaptations of eyepiece holders (as well a much larger "Backfokus") is included.
Other gratings with the common size of 25x25x6mm with more or less resolution can also be used with the DADOS®.
The efficiency of the DADOS® slit-spectrograph is at least 60% at 550 nm.
Properties of the specially designed gratings of the DADOS®
Grating Dispersion at 550 nm spectral resolution lambda/delta lambda
at 550 nm with the 3 slit diametersspectral range covered lines/mm nm/mm nm/ 9 µm Pixel 25 µm 35 µm 50 µm ST-7/ST-402 ST-8/ST-1603 200 47,61 0,443 543 388 272 328 656 900 12,67 0,114 3818 2727 1909 87 174 The slits
The second core element besides the gratings is the reflecting slit element with a precisely manufactured triple slit (with gap widths of 25/35/50µm). You can see all three slits at the same time and easily choose the right one for each object at a glance.
Because of the forward-reflecting slit element with razor-sharp, perfectly smooth edges and an additional, sophisticated optical system of tilted mirror and projection lenses, you can focus – just as with larger spectrographs – directly onto the image of the star with affordable, common CCD-guiding cameras or webcams (not inluded) or even with a guiding eyepiece and easily guide the telescope!
Guiding eyepieces
Two reasonably-priced 1¼" DADOS Kellner eyepieces with 10mm (#1304110) and 20mm (#1304120) focal length are included. They can be used for finding objects and for manual guiding without a guiding camera. A slit illumination (included in the scope of delivery) made of a dimmable red LED helps you to focus the guiding star and the slit itself. It illuminates the slit from the back towards the guiding camera/eyepiece, so that the LED's light will not reach the lens of the collimator.
Lens system
The collimator system in front of/behind the Blaze grating is made of an achromatic and a triplett system. These were specially designed for the best-possible resolution and are coated with the best available anti-reflection-coating. These are no standard lenses from a catalogue!
The collimator lens can be moved over a wide range with a 2" Helical focuser very precisely, so that (almost) all known CCD- and DSLR-cameras (as well as almost all standard eyepieces) can be focused.
Adaptation and Mounting
On the telescope side, the DADOS® has got a black 2" nosepiece. You can attach an optionally available Neon-calibration lamp (#245 8590 - not included) with 2"-adaper and 220V cable to it.
If you remove the nosepiece, you can use the standard 2" SC female thread inside of the front part of the DADOS® for a variety of other adaptations. We have several adapters for a sturdy connection using this thread, e.g. a 2"/T-2 reducer (# 295 8242) to attach the DADOS® directly to optics with the standard T-2 photographic thread (M42x0.75).
You can also the female 2" thread of the front cube to screw the DADOS® without the nosepiese directly at a Schmidt-Cassegrain-telescope. Use our 2" Locking-Ring (#245 8270) to fix the DADOS® in any orientation - this way, you can even mount it between the fork arms of many Schmidt-Cassegrain with an alt-az mount. Both guiding and imaging camera are mounted in a 90°-angle towards the DADOS® to keep it as compact as possible.
To mount the DADOS® on a telescope or attach other accessories, a clamp with 3/8" and 1/4" thread (#245 8593) and 38mm diameter is available.
The two-piece clamp has got a 3/8" thread at the bottom side (a 1/4"-thread is included) and a 1/4" thread on top.
You can use it to mount the DADOS® on a ball-head or a tangent assembly as secondary unit. You absolutely need it in a classroom to mount the DADOS® on an optical bench or for any setup without a telescope.
There are plenty adapters available for all kinds of guiding cameras a well as for almost all imaging CCD-cameras – just take a look at our Astro T-2® accessories.
DADOS features
This user-friendly slit spectrograph, which was designed especially for use in schools or universities and for amateur observers, offers all features of a professional spectrograph. Especially remarkable are the following features:
- Two diffent reflection gratings and a specially designed optical system deliver a high light efficiency
- micrometer gauge for precise adjusting of the grating
- in contrast to spectrographs without a slit, even large objects (nebulae, planets, comets) can be analyzed – just like in a professional observatory
- the spectral resolution (lambda/delta lambda ~ 500) makes a precise spectral classification of stars possible
- the complete visible and near infrared spectral range (350nm – 950nm) can be covered with a SBIG ST-7
- the slit is directly visible with an eyepiece or webcam, which makes it easy to center and guide a star
- the slit spectrograph can even be used at fast optics up to f/6.3, although a slight vignetting is visible at optics faster than ca. f/10
- fits at standard 2" focusers
- compact, can even be used if there is not much space
- the spectrum of brighter objects is directly visible in an eyepiece
- there are three slits side by side (25/35/50µm)
- the slits can be illuminated from the back with a red LED for easier focusing of a camera on the slit
- the spectra can be taken with web-, digital or CCD-cameras
- all cameras and eyepieces can be attached with our T-2® adapters
Spectra of NGC 6543 and M57, taken by OStR Dipl.-Phys. Peter Stinner, Kopernikus-Gymnasium, WissenTest images with SBIG ST-402 ME, white LED + green laser + neon-calibrationlamp
Additional Information
Manufacturer | Baader Planetarium |
---|---|
SKU (#) | 2458550 |
EAN Code | 4047825009142 |
Net weight (kg) | 0.95 |
Usage | Perfect for visual and photographic use with or without a telescope. Suitable for amateur astronomers for private use and for spectroscopy education on schools and universities. |
Spectral Resolution | with different reflection gratings: up to R = 5000 |
Optimized Spectral range | 395-700nm tuneable (ca. 365 - 900nm with 200 L/mm reflection grating) |
Break-even value | 200 L/mm: m = 8 mag. vis | 900 L/mm: m = 6 mag. vis (30cm-telescope S/N=50, 20min. exposure – see instruction manual) |
Mechanical Design | Blaze Grating Spectrograph with moveable and exchangable reflection gratings |
Field size | optimized for sensor sizes: ca. 13x18mm, usable from 6.9 x 4.3 mm (ST-402, ST-1603, STF-8300M, DSLR, ...) |
Collimator focal ratio | f/10 |
Optimized for focal ratio | f/10 telescopes |
Adaptable to | DSLR-, CCD- and Video-cameras |
Slit size | Multi-slit plat with three slits 25, 35 and 50μm |
Illumination | manual red LED for Slit-Focusing |
Special Features | 110-page tutorial. Flip-Mirror with callibration unit under preparation |
Guiding Port | with 1¼"-connection for eyepieces, video- and guiding cameras |
Included Accessories | DADOS, reflection grating 200 L/mm, 10mm and 20mm eyepiece |
![](/skin/frontend/rwd/planetarium/images/flags/en.png)
![](/skin/frontend/rwd/planetarium/images/flags/en.png)
![](/skin/frontend/rwd/planetarium/images/flags/en.png)
![](/skin/frontend/rwd/planetarium/images/flags/en.png)
![](/skin/frontend/rwd/planetarium/images/flags/en.png)