Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2459129
€ 25.00 Price excl. German VAT tax (19%): € 21.01- Baader UFC S70 / M48 (f) Adapter
- telescope-sided M48 inner thread
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
-
# 2457615
€ 28.00 Price excl. German VAT tax (19%): € 23.53- Made for outdoor use at cold temperatures
- Interchangeable EU/US/UK wall plug included
- Output 12.8V DC/ 1.5 Amp (19 Watt), large power reserve even when cold - usable in temperatures from -25°C up to 40°C
- 2.5m (8.25') telescope cord incl. reverse polarity protected, elbowed protective-disconnect plug 5.5mm / 2.1mm
- Not waterproof IP40
- Successor model of the previous 19W Outdoor Power Supply #2457610 (discontinued).
-
- Turn-key Observatories (2.1 - 8.5 Meter) are available as classic slit-domes or as AllSky domes
- Includes all steps to a fully functional remote (robotic) controlled observatory: Consulting on dome model and building sites, suggestion on equipment such as mount, telescope and accessories, as well as transport, installation and training
- Various electronic features possiple, from classic observatory use over remote controlled use up to fully robotic and autonomical dome
- Customized to your needs, suitable for all kinds of uses, for amateur use but also schools, universities and science
-
# 2459112
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Baader UFC 2" Filter Slider / Filter Container M48
- suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
- slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
- Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side
-
# 2958550
€ 69.00 Price excl. German VAT tax (19%): € 57.98- Ready to fit Baader filters (standard outfit)
- Incl. large clear aperture 2" nosepiece and convertible T-2/M48 female threads
- Protects the Canon camera body from dust and moisture
- Scope of supply: Protective T-ring for CANON EOS, temperature compensation ring adapter S52 / M48, insert ring M48 / T-2, socket S52 / 2" (without filter)
-
# 2451108
€ 110.00 Price excl. German VAT tax (19%): € 92.44- suitable for Celestron / Sky-Watcher, EQ-6, NEQ-6 und AZEQ-6 mounts
- suitable for the Baader T-Pod Aluminium tripods 75-110 cm and 95 - 130 cm as well as Baader Hardwood Tripods (discontinued)
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2458121
€ 31.00 Price excl. German VAT tax (19%): € 26.05- Ultra short 1¼" eyepiece-clamp (w. brass locking ring)
- Optical length: 20mm
- Optimized for guiding camera, w. three set screws for utmost stability and for centering of undersized camera-nosepieces
- adapts onto male T-2 thread
- First introduced as part of our Vario Finder 10x60 – long avaited individual part within the Baader Astro T-2 family of adapters
-
From: € 48.00 Price excl. German VAT tax (19%): € 40.34- Baader Neutral Density Filters ND 0.6 / 0.9 / 1.8 / 3.0.
- For perfect energy management during Lunar and Solar observation. Suitable for solar observing only as an additional filter!
- If you need to reduce glare and want to use a filter ahead of the focal point (e.g. before a binocular), then the neutral density filters are just right.
- Fine optical polish results in no loss of sharpness at high magnifications even with a filter position 20-30cm in front of the focal point.
- Phantom Group coated. No ghosting, reflections or stray light.
- Threaded both sides of the glass allows combination with other filters (e.g. Baader Colour Filters).
-
-
# 2451558
€ 689.00 Price excl. German VAT tax (19%): € 578.99- Baader sidewings are connected to the side (left, both sides or right) of the 8" Planewave terminal #2451555.
- Side plates/clamps can be placed on the sidewings, eg: Baader base plate 400mm # 1500340 or Baader Pan EQ clamps 190mm, 230mm and 370mm
-
# 2454613
€ 165.00 Price excl. German VAT tax (19%): € 138.66- Fixed focal length of 13mm, 68° field of view – ease of view even at high magnifications!
- High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
- 1¼" and 2" barrels included, thus variable focal lengths
- Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible
-
From: € 6.50 Price excl. German VAT tax (19%): € 5.46- Astro T-2 System spacer (Fine-Adjustment) rings, available in thickness 0,3mm (black), 0,5mm (red), 1mm (gold)
- Very thin ring for finetuning in T-2 eyepiece projection
- Rings with T-2 inner diameter without threads
- Fits between all T-2 threads, equals approx. 2/5 (0,3mm), 2/3 (0,5mm) respectively 1 1/3 (1mm) turn of rotation. Rotation may differ slightly.
- Prevents binding between two T-2 threaded parts
-
From: € 89.00 Price excl. German VAT tax (19%): € 74.79- O-III Super-G filter with 9 nm FWHM and a maximum transmission of 97%.
- For visual and photographic observation of planetary nebulae and supernova remnants, even with small telescopes
- Can be used as a "Super-G filter" replacement for RGB photography. While regular G-filters suffer from bad seeing due to air turbulences, the narrow range of 9 nm passes less thermal noise, i.e. sharper images. Nevertheless, the transmission window is large enough not to be considered a pure narrowband filter.
- CMOS-optimized coating technolog with much steeper slopes of the filter passband - for increased contrast, longer life and to avoid reflections.
-
# 2957283
€ 39.00 Price excl. German VAT tax (19%): € 32.77- to connect to Skywatcher Refractors with M90x1 outer threads
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
- Also fits RC telescopes with M90 thread, but may require an extension, otherwise the BDS-RT Steeltrack may not retract completely. See also the application picture and the following review of the BDS-RT Steeltrack: Fitting a 2-inch BDS-RT Baader Diamond Steeltrack Focuser to a Teleskop-Service GSO 8-inch Ritchey-Chretien
-
# 2456314Z
€ 122.00 Price excl. German VAT tax (19%): € 102.52- Glasspathcorrector Factor 1,25. Focus gain: ca. 20mmInsert diameter: ∅ 38 mm
- Suitable to insert into the Baader MaxBright® II Binoviewer or Mark V Großfeld (Giant)-Binocular (#2456410 , € 1425,-)
- A Baader Glaspathcorrector is not a Barlow lens! The reason for this name (in Germany the name Glaswegkorrektor® is a protected trademark by Baader Planetarium) is only secondly the displacement of the focal point
- A Glaspathcorrector is primarily intended to correct the prismatic color fringing that occurs on Refractors due to the high amount of glasses used in binocular prisms
- Please note: The Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) is the only Baader-Bino where you can choose between Zeiss ring-dovetail and T-2 thread adapter.
-
# 2459088
€ 39.00 Price excl. German VAT tax (19%): € 32.77- 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- Also available as set containing of four 36 mm filter holders: 4x filter holder 36 mm for Baader FCCT (3D-printed) (#2459098 , € 134,-)
-
# 2458060
€ 48.00 Price excl. German VAT tax (19%): € 40.34- DT Adapter III, M68a / SP54a extension adapter M68
- Digital T Adapter System III of M68_a on SP54_a Shortest adaptation for Telecentric system or the fluoride Flatfield Converter (FFC).
- This adapter fits to the M68 (Zeiss) ring system - see at FFC (fluorite Barlow) -. Eg to a DSLR camera using the digital T-rings to mount the FFC as short as possible.
-
# 1501625
€ 152.00 Price excl. German VAT tax (19%): € 127.73- Length: 610mm (24")
- Black anodized, without holes.
- Weight: 1250g
-
# 2458550
€ 2,360.00 Price excl. German VAT tax (19%): € 1,983.19- Two different reflection gratings for high light output
- The spectral resolution (lambda / delta lambda ~ 500) allows precise spectral classification of stars
- The whole visible and near infrared spectral range (350nm - 950nm) can be covered with a SBIG ST-7
- Included in standard delivery:
- DADOS: Baader Blaze Reflection Gratings 200 L/mm (#2458557 , € 232,-)
- DADOS 10mm Guiding Eyepiece (#1304110 , € 34,-)
- DADOS 20mm Positioning Eyepiece (#1304120 , € 34,-)
- DADOS: Baader Carrying Case for DADOS and accessories (#2452110 , € 83,-)
- further scope of delivery see product description
-
# 2458230
€ 53.00 Price excl. German VAT tax (19%): € 44.54- Reducing piece: M68a to M54a for direct connection of M54 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available) ) to the M68 system
- Converts the M68 (Zeiss) female into a M54 male thread
- Telescope side M68 male thread, eyepiece side M54male thread
- Optical length: 5 mm
- Inner diameter: 51 mm, outer diameter: 76 mm
Shop By Brand
Shop By
- Price
- Stock Level
-
- (602)
- (38)
- (92)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (685)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)