Baader Planetarium

• Maxbright II Bino rotation lock/auxillary-ring – for the shortest possible adaptation of the Maxbright^® II Bino directly onto all Baader T-2 star diagonals. 
• The adaptation via the M34-thread of the Maxbright^® II Bino is especially suited for telescopes with f/10 or slower, to directly screw the binoviewer onto the star diagonal
• This direct connection does not leave room for a Baader glasspath-corrector, but the shorter optical length may be just short enough to not needing a glasspath-corrector at all
• The T-2 Locking ring with lever - for MaxBright® II (#2458271 , € 36,-) is required for this adaptation
• This auxillary-ring allows the changing of the interpupillar distance without moving the locking ring

• Tube-Adapter made of ABS, for Sky-Surfer III
• two-piece adapter set, for various lens tube diameters
• Single price. Included in scope of supply of Sky Surfer III

• 2" ClickLock-Clamp and 2" nosepiece.
• Suited for astronomical observation at high magnification
• Hard-silver-coated and protected against aging. Astro quality, manufactured acc. to Zeiss standard

• To connect all parts of the Baader M68 System directly on FLI color filter wheels and SBIG STX CCD cameras with 3" 24G UNS-2B female thread
• Optical tube length only 1,5 mm, total height of the adapter 17mm
• Lens-sided 3.3" female thread, eyepiece-sided M68x1 male thread

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.

• Length: 250mm (10")
• Black anodized, without holes.
• Weight: 520g

• Apochromatic, multi-coated fluorite lens system
• 10-times higher line resolution than the world best projection eyepieces
• The FFC fits on every T-2 thread and in every 2" focuser

• Nosepiece with 28mm insertion length, with Baader proprietory Safety Kerfs
• With only 3 mm long T-2 thread for modern CMOS cameras
• Eyepiece side with T-2 malel thread, telescope side with 1¼" outer diameter
• Incl. filter thread M28.5 for all 1¼" filters
• Optical path length: 1.5 mm
• Also available as version without Safety-Kerfs and with longer T-2 thread (5mm):
  Baader Nose piece 1¼" / T-2 (T-2 part #14) (#2458105 , € 27,-)

• Baader Solar Continuum Filter, 10nm / CWL 540nm
• A must for owners of achromatic refractors. This filter cuts the spectral range transmitting a specific spectral range around 540nm, completely cutting out blue and red wavelengths in an area of the lens system that where the optics are at their sharpest.
• Enhances contrast and reduces the effect of atmospheric turbulence.
• This filter must be used in conjunction with a Baader Herschel Wedge or Baader AstroSolar Safety Film for solar observations otherwise eye or equipment damage may occur.
• Planeoptically polished, non-ageing sealed coating edges.

• Handle for Telescopes
• Includes 2 piece 3" clamps
• to mount onto 3"(Losmandy style) dovetail

• Telecentric with 2" outer diameter and T-2 threads on both sides
• Aplanatic, with 4x focal length extension to achieve a parallel f/30 beam in conjunction with ~f/7,5 optics systems – free of field curvtare
• Primarily calculated and produced for H-alpha at 656,3 nm, delivering maximum Strehl (definition brightness)

• Historical constellations printed on foils for The Original: Baader Planetarium (#2000000 , € 2450,-) to cut out.
• Are attached to the globe by adhesive force or e.g. with scotch tape
• Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.

• With folding side wing
• For diamter 33.5mm - 34mm

• Connection camera side to M68x1 female thread on the Port 1 of the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
• Designed and manufactured in Germany
• Connection on telescope side: 120 x 7.5 mm dovetail
• Black anodized
• Optical length: 0.5 mm
• Inner and outer diameter: M68x1i / D120 x 7,5 mm

• Baader Classic Ortho 10mm 1¼" Eyepiece , apparent field of view 52°, incl. winged rubber eyecup
• Parfocal Eyepiece series with very high transmission
• This eyepiece delivers a pure-white image with outstanding sharpness and contrast
• True High-Transmission- (HT) and Multi-Coating (MC) on all glass-air-surfaces offer a brilliant image while showing almost no internal reflections
• Suitable as projection eyepiece for OPFA (Eyepiece Projection adapter)

• Dustcap with M54 male thread
• Robust cap made of black anodized metal
• Dustproof closure for your accessories of the Baader M54 System

• Winged straylight-shield/ eyeglassprotector: Excellent stray light shield against side illumination, fast fold down of winged shield
• For Hyperion Universal Zoom Mark IV and older models - fits diam. 43 to 44 mm, 1mm min., clear-cut!
• Material: high quality silicone - non-aging, no chemical softeners, non smelling, not getting brittle over time

• #2451553 300mm counterweight-shaft M14, for leveling counterweights Ø 16mm
• For fine adjustment of telescope systems and when changing from camera to eyepiece
• Incl. end screw
• available in 150mm and 300mm length

NEW VERSION: Steeldrive II motor focuser with Controller

Steeldrive I for Classic Steeltracks is not produced anymore. On this product page you can inform yourself about the Steeldrive I for classic Steeltrack focusers and download the corresponding software.

More details about Steeldrive II