Telescope Accessories
-
# 1500201
€ 143.00 Price excl. German VAT tax (19%): € 120.17- Guidescope rings BP I (2 pc)
- With 6 large handknobs with screw and ball bearing tips
- For tube diameter 60 - 120mm
-
# 1500202
€ 186.00 Price excl. German VAT tax (19%): € 156.30- Guidescope rings BP II (2 pc)
- With 6 large handknobs with screw and ball bearing tips
- For tube diameter 110 - 160mm
-
# 1500203
€ 269.00 Price excl. German VAT tax (19%): € 226.05- Guidescope rings BPIII (2 pc)
- With 6 large handknobs with screw and ball bearing tips
- For tube diameter 140 - 185mm
-
# 1500340
€ 387.00 Price excl. German VAT tax (19%): € 325.21- Sidewing-Baseplate 400mm for Guidescope-Rings, Size III
- Balancing, 400mm long baseplate, fits onto Baader-Sidewings.
- 1kg Baader balancing weights #2951401
-
# 2404305
€ 48.00 Price excl. German VAT tax (19%): € 40.34- Black version
- incl. 2pc batteries SR41W/1.55V
- For Micro Guide eyepiece and many older Fadenkreuzokulare threaded M8 x 0.75mm
-
# 2450317
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Seperate Set of EQ-clamps to mount at the bottom side of the Baader-Stronghold
- Allows the Stronghold to be fixed onto an existing EQ-dovetail bar, while holding on top another EQ-dovetail bar
- Can in addition to the 1x included EQ-clamp of the Strongold Tangent Assembly be mounted on the underside of the Stronghold
- The Stronghold is characterized on an EQ (V) rail are fixed while above an EQ (V) rail terminals
-
# 2451558
€ 689.00 Price excl. German VAT tax (19%): € 578.99- Baader sidewings are connected to the side (left, both sides or right) of the 8" Planewave terminal #2451555.
- Side plates/clamps can be placed on the sidewings, eg: Baader base plate 400mm # 1500340 or Baader Pan EQ clamps 190mm, 230mm and 370mm
-
# 2452200
€ 355.00 Price excl. German VAT tax (19%): € 298.32- Transportkoffer für NexStar 4SE und NexStar 5SE
- Abmessungen: 52 x 30 x 25 cm
- Gewicht: 3,0 kg
- Hergestellt in Deutschland
-
# 2452210
€ 408.00 Price excl. German VAT tax (19%): € 342.86- Travel Case for Celestron NexStar 6SE and NexStar 8SE
- Measurements: 65 x 36 x 26 cm
- Weight: 4,5 kg
- Made in Germany
-
# 2452270
€ 445.00 Price excl. German VAT tax (19%): € 373.95- TEC case is made out of lightweight Aluminum and packed with a hard-foam interior
- With a few special sections that allow to store the APO140 with rings and plate and some small section that can be used for diagonal, eyepieces or other small size accessories
- Dimension for the case: 10" x 13.5" x 37"
- Weight: ca. 15lb
- Constructed in Germany
-
# 2452280
€ 265.00 Price excl. German VAT tax (19%): € 222.69- Transport case with pre-punched compartment for Baader APO 95
- Robust case made of ABS hard plastic
- With compartments for various accessories
-
# 2454306
€ 9.00 Price excl. German VAT tax (19%): € 7.56- SR41W/1.55V 10 pc
- For illuminator
- Not for VarioFinder
-
# 2454307
€ 6.00 Price excl. German VAT tax (19%): € 5.04- SR41W/1.55V 10 pc
- For illuminator
- Not for VarioFinder
-
# 2457000
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Standard base viewfinder mounting Pairing MQR III, IV MQR, SkySurfer 5 for mounting on the "second telescope" and for all Vixen-style finderscope mount bases
- The Baader standard basis is milled from solid (no cheaper casting), adjusts all Tubusradien and can be with two screws in the slots - but also with a single screw in the center - absolutely firmly attach.
- The base plate is milled sinusoidal and forms on each tube radius 130-400 mm diameter two linear runs. This provides maximum stability.
- Hole spacing: for attachment onto a telescope OTA, the Baader-Standard-Base has two long-holes of 14 mm length each and 5.3mm width, The middle spacing between both holes is 36 mm. Accordingly the center spacing distance of two 5mm screws may vary from 26 mm to 46 mm
-
# 2457010
€ 37.00 Price excl. German VAT tax (19%): € 31.09- Universal Red Dot Mount RDM – holder for red dot finders with 70 mm height
- All metal design (rail part & base part)
- Weaver gun-rail standard 11mm standard gun rail – fits all Red Dot finders
- V-shaped dove-tail fits most finder-shoes of Celestron, Sky-Watcher, Vixen and Bresser telescopes – can be removed for third party platforms
-
# 2457011
€ 47.00 Price excl. German VAT tax (19%): € 39.50- Universal Red Dot Mount RDM – holder for red dot finders with 70 mm height, includes Standard Base
- All metal design (rail part & base part)
- Weaver gun-rail standard 11mm standard gun rail – fits all Red Dot finders
- V-shaped dove-tail fits most finder-shoes of Celestron, Sky-Watcher, Vixen and Bresser telescopes, includes Baader Standard Base #2457000 to fit all telescopes with one or two mounting screws
-
# 2457020
€ 96.00 Price excl. German VAT tax (19%): € 80.67- Multipurpose Quick Release III (MQR III) 7x50 for all 50mm finderscopes with diameter of 62mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
- With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
- You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube
- 4mm hex-wrench included
- With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
- Includes Baader Standard Base
-
# 2457030
€ 102.00 Price excl. German VAT tax (19%): € 85.71- Multipurpose Quick Release IV (MQR IV) 9x60 for all 60mm finderscopes with diameters of up 72mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
- With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
- You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube.
- 4 mm hex wrench is included
- With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
- Quick and easily detachable – keeps its position with a precision of up to a hundredth of a millimeter
-
# 2457555
€ 4.00 Price excl. German VAT tax (19%): € 3.36- Battery 3V Lithium for Celestron Star Pointer, Baader Sky Surfer III / V and Vario-Finder
-
NEW VERSION: Steeldrive II motor focuser with Controller
Steeldrive I for Classic Steeltracks is not produced anymore. On this product page you can inform yourself about the Steeldrive I for classic Steeltrack focusers and download the corresponding software.
More details about Steeldrive II
Learn More