Baader Planetarium

• M42x1 internal thread with T-2 external thread
• Transition adaptor for all Russian threaded M42x1 to the T-2 M42x0.75 thread.
• Allows 1¼" eyepiece tubes, cameras and the OPFA projection system to be connectable to Russian equipment.
• Fits most Russian telescopes (Intes / TAL / Rubinar u. A.) "Russians adapter"

• V-dovetail rail with radius and with holes for 8 "SC / HD
• Only suitable for SC and HD OTAs with new round backplate. (For Celestron OTAs with the old flat backplate please use the Baader V rail / dovetail bar 470mm for SC (#2451101 , € 83,-)
• Length: 345mm
• Drilled and includes mounting screws for Celestron 8“ SC / HD
• Orange anodized

• Baader Turbo Film 127x51cm (Optical Density: 0,1). Use to protect your telescope and optical equipment against dust and humidity – without reducing the optical quality
• This is the essence of AstroSolar safety film. A highest precision, crystal clear material (not “Mylar”).
• It is a monomer film which we found after thoroughly testing more than 200 different film samples on our Zeiss autocollimator. This film was used in german Science Institutes as optical membrane for nuclear and particle physics experiments. The basic substrate has been further refined and homogenized by a proprietary annealing process that was developed exclusively for us.
• Due to these treatments Turbo Film attains perfect homogeneity and performs equal to a 1/10 wave plane parallel optical window. In fact it has the lowest wedge error of any existing optical window. TurboFilm will protect your valuable optical equipment, close telescope tubes against dust and humidity, greatly reduce air currents – all without reducing the optical quality of your telescope.

• Complete packaging for The Original: Baader Planetarium (#2000000 , € 2450,-)
• Already 1x included with the planetarium

• Ideal for Newton Focuser e.g. Baader Newton Crayford focusers with only 1mm optical path length
• Provides three separate mounting optios for 1¼" accessories
• Side clamping screw and brass clamping ring for secure grip. Also includes countersunk grub screws for permanent or quick release operation of the brass clamping ring.
• The countersunk Delrin grub screws allow for the pressure to be set correctly. This acts as a quick release without relying on set screws. When an eye piece is inserted it is held securely and safely while still allowing the eye piece to be removed.

• made of V2A stainless steel
• Ø 140x30mm, bore Ø 28,7mm
• 3 kg

• hand-painted earth globe with graduation to put on the gear box – electrically driven miniature motor for the earth and moon system
• Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.

• Bayonet adapter to fit suitable 1¼" astro-eyepieces onto all Carl Zeiss Diascope Fluorit spotting scopes
• includes Allen Wrench key and two O-rings to adjust stiffness when switching eyepieces
• Please note: The adapter must not be inserted into the spotting scope without an eyepiece. Otherwise, you don‘t have enough grip to remove it.

• 3,5" Quick Changing ring with dovetail for the Baader 3,5" Quick Changer and Instrument rotator for PlaneWave (#1324000 , € 395,-)
• Suitable for Hedrick Focuser 3.5" for PlaneWave  CDK 14 - 24" to connect the 2" or M68 system with appropriate adapters
• Creates a quick change and rotating device with standard load capacity when coupled with  Baader 3,5" Quick Changer and Instrument rotator for PlaneWave (#1324000 , € 395,-)
• Made of high-quality aluminum, anodized black
• Scale for rotation adjustment

• Specially created for Hyperion ClickStop Zoom Mark III
• Result in a focal length range of 3,5 to 10,5 mm
• Modular Design: usable for many applications (visual and photographic)

• 3D-printed dark slider for taking dark frames
• Suitable for  Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-) – the 3D-printed dark slider is already included in the basic equipment of the FCCT I and FCCT II.

• 1¼" nosepiece with T-2 thread and M28.5 filterholder
• Barrel with 24mm Insertion and securing groove
• Focus side with T-2 external thread telescope side with 1¼ " outer diameter
• Also available as version with Safety-Kerfs and with extra-short T-2 thread (3mm):
  Baader 1¼" T-2 nosepiece with Safety Kerfs (#2458106 , € 31,-)

• Baader H-alpha / O-III / S-II Narrowband Filter Set – Precision Grade
• 6.5 nm FWHM, recommended for optical systems from > f/3.4
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

We explicitly warn against observing the sun with a DeepSky 6.5 nm (equivalent to 65 Ångstroem) H-alpha narrowband filter, specialized solar chromosphere and prominence filters from SolarSpectrum start at 0.8 Ångstroem. Photographic experiments with a camera are theoretically possible, but by no means observe the sun with naked eyes – you endanger your eyesight!

• for larger Celestron-Mounts
• Made for outdoor application, water resistant sealed housing. Usable in temperatures from -25°C up to 40°C
• input voltage 100-240V, Output 12.8V / 5A 60W
• Protective-disconnect ellbowed plug German design and quality with EU-wall plug

• 47.4 mm (2" w/o cell) x 2 mm Baader CMOS O-III f/2 Ultra-Highspeed Filter – Premium Grade
• 2" Filter removed from filter cell, specially selected for use with 2" Filter sliders of the Baader FCCT (Filter Changer Camera Tilter) for RASA 8" and QHY cameras (various versions available)
• 4 nm FWHM , recommended for extremely fast optical systems from < f/2.3
• Specially designed for the special filter requirements when used with extremely fast f/2 optics like the Celestron RASA astrographs
• For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• Centers FFC/Solar TZ-syst. within M68 spacer rings
• Outer Thread: M68 (Zeiss), 2.7 "(Astrophysics), M60 (Vixen), M56 female thread (China)
• Eyepiece Thread: T-2 (photo) male and female threads and M68 (Zeiss) female thread

• Baader O-III f/2 Ultra-Highspeed Filter – Premium Grade
• 4 nm FWHM, recommended for extremely fast optical systems from < f/2.3
• Specially designed for the special filter requirements when used with extremely fast f/2 optics like the Celestron RASA astrographs
• For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

Successor model for GM 4000:
Stabilized Poser-Supply for10Micron GM 2000 / GM 3000 and 4000

The new control of the mounts is again significantly revised and stabilized, which allows us to become more efficient on the power supply side as well.

The Baader OTP 600W is no longer produced and therefore replaced by the Stabilized Power-Supply for GM 2000 / GM 3000 and GM 4000 (#1452070 , € 230,-)

• Baader UBVRI-V Bandpass Filter, suitable from
• Classic photometric filter with transmission according to Bessel – parfocal with all Baader filters of the same size
• Manufactured with most advanced ion beam coating technology / Daylight-Proof
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Equally suitable for modern CMOS cameras as well as for older CCD camera technologies