Baader Planetarium

• Baader Wide-T-Ring Canon R to connect Canon EOS R cameras on the Astro T-2 system and S52 dovetail
• All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
• The illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
• On the camera side: Canon R Bayonet
• Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch

• Many customers want to use their own Blaze Reflection Gratings for projects with the DADOS Spectrograph - this is not possible with our grating holder and reflection gratings from eg. Thorlabs
• Scope of supply: Grating holder without gratings

Previous version – no longer available

• 2 ", 23 ° Safety Herschel Prism, utilizing special Phantom Group® coatings for glare control. 2” ClickLock® eyepiece holder.
• There is no better and safer method for uncompromising sharp solar observation / photography in white light.
• A special heat absorbing ceramic element traps radiant heat similar to the space shuttle heat tiles - without heating the surrounding area too. The fully enclosed housing adds to the safety and prevents the risk of glare.
• Please choose version from dropdown to see scope of supply

• ADPS – Afocal Digital Projection System ( I - VII )
• Delivery without projection eyepiece
• For digital imaging with cameras and/or camcorders
• Consist of base version ADPS (single parts see ADPS IV) and additional lens sided adapters on other ADPS versions

• Height  20 mm + leveling space 30-50 mm, incl. ground sill anchor
• Sutiable for the following Baader Medium Pillar (BMP) Levelling flanges:
  • Baader Medium Pillar (BMP) Levelling Flange For AstroPhysics 1200/1600 Mount (#2451173 , € 398,-)
  • Baader Medium Pillar (BMP) Levelling Flange for GM 2000 and AP 1100/900 GTO Mounts (#2451171 , € 445,-)
  • Baader Medium Pillar (BMP) Levelling Flange For ME/ME II Paramount Mounts (#2451180 , € 380,-)
  • Baader Medium Pillar (BMP) Levelling Flange For Paramount MX (#2451181 , € 445,-)
  • Baader Steel Levelling Flange for ALT 5ADN mounts (#2451160 , € 329,-)
  • Baader Steel Levelling Flange for ALT 7ADN Mounts (#2451161 , € 329,-)

The Baader levelling flange base is used to mount Baader leveling flanges on customer-provided pillars. Fastening material is included.

• BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• suitable as a pillar adapter flange to the Baader conical steel pillar [product sku="BHP2451220
• Overall height: 150 mm
• The steel pillar flange Steel pillar flange for GM 3000 mount (#1453090 , € 275,-) is needed

• The original BAADER PLANETARIUM – produced for more than 50 years
• More than 15.000 pieces have been delivered world-wide
• The instrument consists of a Star-Glob with 50 centimeters diameter made of acrylic glass - almost black, but transparent for the observer in a darkened room.
• With the Baader Planetarium you can demonstrate the mechanics of the heaven in a heliocentric manner. Perfectly suited for schools, universities and observatories

• Baader UFC Filter Slider / Filter Container D50.4
• suitable for unmounted, round 50.4 mm filters (for Filter-Ø 50 mm up to 50,5 mm)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily

• Allows mounting of Baader 2" filters
• Needs Hyperion DT-rings #2958028 - 2458062 and additional Stepper Rings M67 up to M82
• All Baader 2" filters in version M48 thread can be customised with specific extension tubes on almost all DSRL lenses.

• GP-Tripod-Adapter / GP-Pillar-Flange-Adapter suitable for Vixen-SP/GP- and -GP-DX, Celestron Advanced-GT, EQ5, HEQ-5 Mounts, Bresser, Sky-Watcher
• suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
• gets mounted directly on Baader Short Pillar III, the Universal Flange-Basis (#2451155) is NOT needed in this case

• Baader M68 VariLock Extension 15-20mm
• Continuosly (stepless) adaptable M68 extension with millimeter scale for fine-tuning of the optical height between 15 and 20mm in the M68-system
• telescope-sided with M68 male (outer) thread
• camera-sided withM68 female (inner) thread

• Baader 7.5 nm Solar Continuum Filter, CWL 540nm
• A must for owners of achromatic refractors. This narrowband-filter cuts the spectral range where lens optics draw sharpest and contrastiest. The Baader Solar Continuum Filter lets you use the full power of your telescope.
• Enhances contrast and reduces the effect of atmospheric turbulence (in combination with white light solar filters)
• Enormous contrast gain in monochrome photography even on apochromatic systems
• Important note: The Solar Continuum Filter must be used ONLY with additional filtering (e.g. Baader Herschel prism or AstroSolar Safety Film)

• SR41W/1.55V 10 pc
• For illuminator
• Not for VarioFinder

• Baader UFC S70 / RASA 36cm (14") Adapter
• telescope-sided RASA 36cm-plate
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions

• Eyepiece case with pre-punched compartments for up to eight eyepieces
• Suitable for Morpheus and Hyperion eyepieces
• Eyepieces NOT included

• Multi-Purpose Variofinder 10x60 with Astro Lens and 45° erect image prism and 25mm eyepiece with illuminated measuring recticle, 4,5° field of view
• 61mm aperture with Baader Phantom Group Coating, 250mm focal length, 1:4.1 focal ratio
• Can be used also as guide scope or 60mm spotting scope
• Including EQ dovetail/Tripod adapter
• The Baader MQR can be used either in full height or in a low profile configuration
• The V-dovetail and ring-base-plate of the MQR-finder-holder can be directly mounted onto each other without the intermediate spacer, with the help of two (optional) M5x12 mm screws. This allows to use the finder in a low profile configuration as it is desirable for Schmidt-Cassergrain OTAs
• The spacer itself is equipped with a mini-weaver-style dovetail so that it can carry a SkySurfer III or SkySurfer V red dot finder as well

• Baader RS-232 cable for NexStar - made in Germany
• Connects the RJ 11 port of your hand control to the RS 232 port of your PC.
• Necessary to upgrade the Flash EProm Hand Controller and to control the telescope e.g. over NexRemote.
• If your PC / laptop no RS 232 interface, you also require the USB - RS 232 converter cable

• T-2 (M42x0.75) Locking ring with lever for direct attachment of the MaxBright^® II onto all Baader T-2 star diagonals, be it prisms or mirrors (e.g. to directly couple the body of the Maxbright II with the Baader Prism Diagonal T-2/90° 32mm (#2456005 , € 110,-)
• An Bino auxillary-ring for adaptation of MaxBright® II (#2458272 , € 10,-) is additionally required for adaptation of the MaxBright^® II. The Bino auxillary-ring is placed between the binocular and the T-2 locking ring.
• If the lever of the locking ring comes to rest in an unfavourable position you can still adjust the position of the lever. The lever is only threaded into the ring at the outer circumference. This lever may be threaded into any of the three M4 threads each spaced 120° apart.

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.