Baader Planetarium

NEW VERSION: Baader OMS-Nano – Remote Switch for 10Micron Mounts

The Remote Switch Module is not produced anymore. Therefore, we have redesigned the Remote Switch and manufactured it with a new look and name. The Remote Switch is now part of our OMS (Observatory Management System). 

More details about the Baader OMS-Nano – Remote Switch for 10Micron Mounts

• DADOS 1¼" Guiding Eyepiece, Kellner 10mm

• Baader UFC Filter Slider / Filter Container D50.4
• suitable for unmounted, round 50.4 mm filters (for Filter-Ø 50 mm up to 50,5 mm)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily

• Cone-shaped/octagonal Steel pillar
• Payload capacity up to 600kg
• welded Steel, actively dampening vibrations
• with Internal tube of 3" inner width for cabeling through the pillar and mounting materail
• available in different sizes

• drying agent 125ccm
• environmentally friendly coloured indicator
• re-usable as often as you like
• protects optics from humidity

• M43/M43 extension (distance ring), suitable for Morpheus, Hyperion and other eyepieces/adapters with M43 outer thread
• Optical length: 7,5mm
• With this extension the distance of the foldable, as well as the winged rubber eyecup can then be finetuned to optimum height. Also this helps to keep any smartphone holder to firmly clamp over the exiting eye-lens. In addition multiple of these M43- rings may be added to achieve the optimum distance to your camera chip for eyepiece projection.

• Baader CMOS LRGB Bandpass Filter Set, suitable from f/15 to f/1.8
• Anti-reflection RGB filter (red/green/blue) with extremely high transmission of the respective color channel, thus simultaneously reducing stray light and reflections to an unprecedented level
• Including UV/IR cut (L-filter) with 98% transmission over the entire visible spectrum from 420 - 685
• Balanced RGB design allows subframes to be taken with the same exposure time – extremely important for automated imaging tasks
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• Allows quick changing of accessories such as Cameras, Spotting Scopes, Binoculars or small telescopes on the Astro & Nature tripod
1x included in Astro & Nature tripod scope of supply

• To connect all parts of the Baader M68 System directly to a Celestron or AstroPhysics 3,3" thread
• Suitable for direct connection to a EdgeHD 9¼"/11"/14" and SC 11"/14". Also suitable for Celestron- and Astro Physics-Reducers with 3.3" male thread
• Optical tube length only 7mm, total height of the adapter 17mm (can be threaded completely onto a 10mm long thread, e.g. by most Astro Physics reducers)
• Lens-sided 3.3" female thread, eyepiece-sided M68x1 female thread

• Baader Wide-T-Ring to connect Fuji X cameras on the Astro T-2 system
• All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
• Ultra-short Backfocus of only 26 mm (17.7 mm camera, 8.3 mm Wide-T-ring)
• Furthermore, the illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
• On the camera side: Fuji X Bayonet
• Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch

• Varta V675HP 6 pieces
• Fits only the old, silver-colored lighting unit.

• Adapter with M68i x1 to M74i x1 female threads, to adapt M68 parts to focusers with M74 x 1 male thread, e.g. Skywatcher Esprit 120&150, TS-Optics and Omegon APOs 150/1000 with Linearpower focuser
• Changes a M68x1 (Zeiss) male thread into a M74 x 1 female thread
• Part is used in our M74i x 1 ClickLock clamp #2956274
• Optical height: 12,7 mm, Inner diameter (clear aperture): 67 mm

• With folding side wing
• For diamter 33.5mm - 34mm

• Multi-Purpose Variofinder 10x60 with Astro Lens and 45° erect image prism and 25mm eyepiece with illuminated measuring recticle, 4,5° field of view
• 61mm aperture with Baader Phantom Group Coating, 250mm focal length, 1:4.1 focal ratio
• Can be used also as guide scope or 60mm spotting scope
• Including EQ dovetail/Tripod adapter
• The Baader MQR can be used either in full height or in a low profile configuration
• The V-dovetail and ring-base-plate of the MQR-finder-holder can be directly mounted onto each other without the intermediate spacer, with the help of two (optional) M5x12 mm screws. This allows to use the finder in a low profile configuration as it is desirable for Schmidt-Cassergrain OTAs
• The spacer itself is equipped with a mini-weaver-style dovetail so that it can carry a SkySurfer III or SkySurfer V red dot finder as well

• Baader USB / RS-232 converter cable (similar to Celestron Item Nr.18775), however, made in Germany
• To connect a device with RS 232 interface to the USB port of a laptop
• Required drivers for Windows, Mac and Linux can be found under the "Downloads" tab

• 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters
• Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
• The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
• With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
• Also available as set containing of four 31 mm filter holders: 4x filter holder 31 mm for Baader FCCT (3D-printed) (#2459097 , € 129,-)

• Baader T-Ring for compact cameras with Micro 4/3 on the Astro T-2 system
• Allows the connection of T-2 lenses with 55mm back focus
• The built in 19mm extension can be removed
• Without extension compact cameras with a short adapter are only 36mm from the T-2 thread

• Steeldrive II Controller without motor focuser unit
• Controls the temperature compensating Steeldrive II focusing motor for Baader Steeltrack® (Classic and Diamond) focusers and optionally many other focusers
• AUX port for precise temperature control e. g. of dew shield heaters, optical filters or instruments with a precision of +/-0.1 degree
• Intuitive handling: The back-illuminated hand control makes fast switching between normal speed, jogging and single step mode easy
• 12 V / 1A PWM power supply included
• Incl. 3m USB-cable to connect to a PC
• Incl. powerful SteelGo II Software (as download)
• Made in Germany: The housing is CNC-milled from Aluminium in our factory. The electronical boards are made by a German company according to our specifications
Learn More

• Universal Red Dot Mount RDM – holder for red dot finders with 70 mm height
• All metal design (rail part & base part)
• Weaver gun-rail standard 11mm standard gun rail – fits all Red Dot finders
• V-shaped dove-tail fits most finder-shoes of Celestron, Sky-Watcher, Vixen and Bresser telescopes – can be removed for third party platforms