Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451106
€ 100.00 Price excl. German VAT tax (19%): € 84.03- GP-Tripod-Adapter / GP-Pillar-Flange-Adapter suitable for Vixen-SP/GP- and -GP-DX, Celestron Advanced-GT, EQ5, HEQ-5 Mounts, Bresser, Sky-Watcher
- suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
- gets mounted directly on Baader Short Pillar III, the Universal Flange-Basis (#2451155) is NOT needed in this case
-
# 2458252
€ 46.00 Price excl. German VAT tax (19%): € 38.66- With the S52/M68 adapter, all Baader Wide T-rings can be adapted directly to an M68 female thread. This allows your M68 telescope or accessories to be screwed firmly to your camera with the largest possible aperture.
- The S52/M68 adapter fits all S52 dovetail clamps (D52) - for example our S52-Clicklock #2956252 or the Canon Protective T-Ring #2958550
- Camera-side: S52 dovetail
- Telescope-side: M68x1 male thread
-
# 2458660
€ 425.00 Price excl. German VAT tax (19%): € 357.14- BACHES: Thermal Insulation Housing
- The CNC milled two-piece housing, protects the spectrograph from fluctuations in the outside temperature at the telescope
- Very good thermal insulation is achieved by 20mm wall thickness of weather-resistant EPS rigid foam Learn More
-
# 2454306
€ 9.00 Price excl. German VAT tax (19%): € 7.56- SR41W/1.55V 10 pc
- For illuminator
- Not for VarioFinder
-
# 2458238
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Adapter with M68i x1 to M75a x1 male thread, to adapt M68 parts to Starlight Instruments Feathertouch 3.0" focusers with M75 x 1 female thread
- Changes a M68x1 (Zeiss) male thread into a M75 x 1 male thread
- Part is used in our M75a x 1 ClickLock clamp #2956275
- Optical height: 8 mm, Inner diameter (clear aperture): 67 mm
-
# 2408145
€ 72.00 Price excl. German VAT tax (19%): € 60.50- 3.3" thread for C11 and C14
- For connecting the Baader 2" Deluxe Clamping Eyepiece Holder (T-2 part #17) (#2408140 , € 58,-) to C11 and C14 telescopes
- A clear 50mm aperture
- No vignetting when used on C11 and C14 telescopes
-
# 2957304
€ 7.00 Price excl. German VAT tax (19%): € 5.88- Adapter for large telescopes made of ABS, for Sky-Surfer III
- fits onto Celestron, Vixen, Skywatcher-Norm
- Single price. Included in scope of supply of Sky Surfer III
-
# 2455037
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Baader RS-232 cable for NexStar - made in Germany
- Connects the RJ 11 port of your hand control to the RS 232 port of your PC.
- Necessary to upgrade the Flash EProm Hand Controller and to control the telescope e.g. over NexRemote.
- If your PC / laptop no RS 232 interface, you also require the USB - RS 232 converter cable
-
# 2459088
€ 39.00 Price excl. German VAT tax (19%): € 32.77- 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- Also available as set containing of four 36 mm filter holders: 4x filter holder 36 mm for Baader FCCT (3D-printed) (#2459098 , € 134,-)
-
# 2454500
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Bayonet adapter to fit suitable 1¼" astro-eyepieces onto all Carl Zeiss Diascope Fluorit spotting scopes
- includes Allen Wrench key and two O-rings to adjust stiffness when switching eyepieces
- Please note: The adapter must not be inserted into the spotting scope without an eyepiece. Otherwise, you don‘t have enough grip to remove it.
-
# 2957235
€ 6.00 Price excl. German VAT tax (19%): € 5.04- Long, 1.5mm thick washer ("strip shims") to adapt Baader VersaBase to different tube sizes
- Dimensions: 110 x 12 x 1.5 mm (length x width x height)
- Already included four times in the BDS-NT or Baader VersaBase (the base of our BDS-NT Diamond Steeltrack®) scope of delivery
- Only suitable for BDS-NT Diamond Steeltrack® for Newtonians
-
# 2457011
€ 47.00 Price excl. German VAT tax (19%): € 39.50- Universal Red Dot Mount RDM – holder for red dot finders with 70 mm height, includes Standard Base
- All metal design (rail part & base part)
- Weaver gun-rail standard 11mm standard gun rail – fits all Red Dot finders
- V-shaped dove-tail fits most finder-shoes of Celestron, Sky-Watcher, Vixen and Bresser telescopes, includes Baader Standard Base #2457000 to fit all telescopes with one or two mounting screws
-
# 2458230
€ 53.00 Price excl. German VAT tax (19%): € 44.54- Reducing piece: M68a to M54a for direct connection of M54 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available) ) to the M68 system
- Converts the M68 (Zeiss) female into a M54 male thread
- Telescope side M68 male thread, eyepiece side M54male thread
- Optical length: 5 mm
- Inner diameter: 51 mm, outer diameter: 76 mm
-
# 2458060
€ 48.00 Price excl. German VAT tax (19%): € 40.34- DT Adapter III, M68a / SP54a extension adapter M68
- Digital T Adapter System III of M68_a on SP54_a Shortest adaptation for Telecentric system or the fluoride Flatfield Converter (FFC).
- This adapter fits to the M68 (Zeiss) ring system - see at FFC (fluorite Barlow) -. Eg to a DSLR camera using the digital T-rings to mount the FFC as short as possible.
-
# 2451525
€ 219.00 Price excl. German VAT tax (19%): € 184.03- Quick mounting of optics with all EQ standard Celestron / Skywatcher / Vixen dovetail
- Massive but lightweight EQ-clamp, 190 mm (7.5") long w. multi-contact ribbed dovetail face
- Bottom side featuring various predrilled hole patterns to fit onto DEC-face of most mounts (Takahashi, 10Micron, Astro-Physics, Vixen, Celestron)
- With an integrated 3 "dovetail, suitable for all mounts with 3" (Losmandy). Can therefore also be used for adapting telescopes with attached Vixen rails to 3" clamps
- Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)
-
# 2459212
€ 95.00 Price excl. German VAT tax (19%): € 79.83 -
# 2958600
€ 25.00 Price excl. German VAT tax (19%): € 21.01- Dustcap with M48 female (inner) thread
- Robust cap made of black anodized metal
- Dustproof closure for your accessories of the M48 system
-
# 2458215
€ 58.00 Price excl. German VAT tax (19%): € 48.74- To mount #24580-35/-36 DSLR T-Rings with 2 Filter compartment onto Zeiss M68 System
- Medium Format T-adapter M68
- Adapter for System M68 (Zeiss)
- M68 - 6x6 T adapter V-mount dovetail
-
# 2957297
€ 108.00 Price excl. German VAT tax (19%): € 90.76- Adapter to connect the 2" BDS-SC Baader Diamond Steeltrack® Focuser (#2957220 , € 365,-) onto M48-threads
- only suitable for BDS-SC Diamond Steeltrack® focuser
- optical length: 35 mm
-
# 2951406
€ 158.00 Price excl. German VAT tax (19%): € 132.77- made of V2A stainless steel
- with CDP = Camera Docking Port, 28,7mm diam., ¼" photo-thread
- Ø140x60mm, bore Ø 28,7mm – may be extended up to Ø 56mm
- 6kg