Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2459113
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Baader UFC Filter Slider / Filter Container D50.4
- suitable for unmounted, round 50.4 mm filters (for Filter-Ø 50 mm up to 50,5 mm)
- slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
-
# 2408166
€ 27.00 Price excl. German VAT tax (19%): € 22.69- Allows mounting of Baader 2" filters
- Needs Hyperion DT-rings #2958028 - 2458062 and additional Stepper Rings M67 up to M82
- All Baader 2" filters in version M48 thread can be customised with specific extension tubes on almost all DSRL lenses.
-
# 2451107
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen Sphinx mount
- suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
- also fits onto Vixen-, Bresser- or Sky-Watcher tripods
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2458211
€ 145.00 Price excl. German VAT tax (19%): € 121.85- Baader M68 VariLock Extension 15-20mm
- Continuosly (stepless) adaptable M68 extension with millimeter scale for fine-tuning of the optical height between 15 and 20mm in the M68-system
- telescope-sided with M68 male (outer) thread
- camera-sided withM68 female (inner) thread
-
From: € 118.00 Price excl. German VAT tax (19%): € 99.16
- Baader 7.5 nm Solar Continuum Filter, CWL 540nm
- A must for owners of achromatic refractors. This narrowband-filter cuts the spectral range where lens optics draw sharpest and contrastiest. The Baader Solar Continuum Filter lets you use the full power of your telescope.
- Enhances contrast and reduces the effect of atmospheric turbulence (in combination with white light solar filters)
- Enormous contrast gain in monochrome photography even on apochromatic systems
- Important note: The Solar Continuum Filter must be used ONLY with additional filtering (e.g. Baader Herschel prism or AstroSolar Safety Film)
-
# 2454610
€ 165.00 Price excl. German VAT tax (19%): € 138.66- Fixed focal length of 10mm, 68° field of view – ease of view even at high magnifications!
- High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
- 1¼" and 2" barrels included, thus variable focal lengths
- Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible
-
# 2458248
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Dustcap with M68 x 1 female (inner) thread
- Robust cap made of black anodized metal
- Dustproof closure for your accessories of the Baader / Zeiss M68 system
-
From: € 98.00 Price excl. German VAT tax (19%): € 82.35
- Visual and photographic UHC-L Nebula filter with highest transmission
- Ultra High Contrast L Filter blocks city lights and increases contrast of nebula and comets (C2 lines)
- Can be used as LED-opimized Luminance filter for RGB-Imaging wtih skyglow suppression
- Blue transmission optimized to block blueish skyglow caused by LED car- and streetlights.
- Creates a much brighter image than a conventional Nebula filter
- Ideal for deep-sky observers. This UHC-L filter is the perfect visual complement to narrowband OIII filters.
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
-
# 2957296
€ 108.00 Price excl. German VAT tax (19%): € 90.76- to connect to Intes Micro with D66 Flange
- only suitable for BDS-SC Diamond Steeltrack®
- Height of the Adapter: ~ 39mm. The min / max height of the BDS-SC with this adapter is 91,5mm / 124,3mm
-
# 2456314
€ 122.00 Price excl. German VAT tax (19%): € 102.52- Glasspathcorrector Factor 1,25. Optical path length: ≥ -30 mm
- Insert diameter: ∅ 38 mm
- Suitable to insert into the Baader MaxBright (Classic and MaxBright® II)
- A Baader Glaspathcorrector is not a Barlow lens! The reason for this name (in Germany the name Glaswegkorrektor® is a protected trademark by Baader Planetarium) is only secondly the displacement of the focal point
- A Glaspathcorrector is primarily intended to correct the prismatic color fringing that occurs on Refractors due to the high amount of glasses used in binocular prisms
- Please note: The Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) is the only Baader-Bino where you can choose between Zeiss ring-dovetail and T-2 thread adapter.
-
# 2459085
€ 40.00 Price excl. German VAT tax (19%): € 33.61- 3D-printed filter holder for unmounted 2" (Ø 47,4 mm) Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- We offer selected 2" filters especially for the FCCT in an unmounted variant, but basically all Baader 2" filters work when removed from the filter cell
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- Also available as set containing of four 2" filter holders: 4x filter holder 2" (Ø 47,4 mm) for Baader FCCT (3D-printed) (#2459095 , € 137,-)
-
# 2958043
€ 19.00 Price excl. German VAT tax (19%): € 15.97- for DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
-
# 1501620
€ 129.00 Price excl. German VAT tax (19%): € 108.40- Length: 530mm (20,5")
- Black anodized, without holes.
- Weight: 1070g
-
# 2458392
€ 180.00 Price excl. German VAT tax (19%): € 151.26- 1¼" Double Stacked Baader Solar Continuum Filter. 8nm / CWL 540nm.
- Includes 1x AstroSolar® Photo Film OD 3.8 20x29 cm. The filter includes two Baader Solar Continuum Filters in a single filter cell which have been stacked for even higher contrast.
- Enhances the contrast and reduces the effect of atmospheric turbulence.
- This filter must be used in conjunction with a Baader Herschel Wedge or Baader AstroSolar® Safety Film 5.0 (not included) for solar observations otherwise equipment damage may occur. The included Baader AstroSolar® Photo Film 3.8 must not be used for visual observation but only for solar photography (e.g. lucky imaging).
-
From: € 7.50 Price excl. German VAT tax (19%): € 6.30
- System M54 – spacer (Fine-Adjustment) rings, available in thickness 0,3mm (black), 0,5mm (red), 1mm (gold)
- Very thin ring for finetuning in the M54-system
- Ring in M48 diameter without threads
- Fits between all M54 threads, equals approx. 2/5 (0,3mm), 2/3 (0,5mm) respectively 1 1/3 (1mm) turn of rotation. Rotation may differ slightly.
- Prevents binding between two M54 threaded parts
-
# 1508005
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Combo of M44 male and T-2 male threads
- T-2 (M42 x 0.75) thread
- To connect T-2 accessories / cameras / T rings to Zeiss telescopes
- Optical path length of 5mm
-
# 2451734
€ 73.00 Price excl. German VAT tax (19%): € 61.34- V-dovetail rail with radius and with holes for 8 "SC / HD
- Only suitable for SC and HD OTAs with new round backplate. (For Celestron OTAs with the old flat backplate please use the Baader V rail / dovetail bar 470mm for SC (#2451101 , € 83,-)
- Length: 345mm
- Drilled and includes mounting screws for Celestron 8“ SC / HD
- Orange anodized
-
# 2459350
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Baader Turbo Film 127x51cm (Optical Density: 0,1). Use to protect your telescope and optical equipment against dust and humidity – without reducing the optical quality
- This is the essence of AstroSolar safety film. A highest precision, crystal clear material (not “Mylar”).
- It is a monomer film which we found after thoroughly testing more than 200 different film samples on our Zeiss autocollimator. This film was used in german Science Institutes as optical membrane for nuclear and particle physics experiments. The basic substrate has been further refined and homogenized by a proprietary annealing process that was developed exclusively for us.
- Due to these treatments Turbo Film attains perfect homogeneity and performs equal to a 1/10 wave plane parallel optical window. In fact it has the lowest wedge error of any existing optical window. TurboFilm will protect your valuable optical equipment, close telescope tubes against dust and humidity, greatly reduce air currents – all without reducing the optical quality of your telescope.
-
# 2000313
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Cover made of opaque, high quality plastic foil with print
- Suitable for all planetariums with 50cm globe
- is simply pulled over the The Original: Baader Planetarium (#2000000 , € 2450,-)
- Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
-
# 2408150
€ 40.00 Price excl. German VAT tax (19%): € 33.61- Telescope sided 2" nose piece barrel with safety groove and 2" female filter thread (M48)
- Eyepiece sided with countersunk T-2 thread for a variety of adaptions such as adapting to T-2 binoviewers as well as an M48 male thread (hidden beneath removeable M48 stopper ring).
- Effective optical length only 2.5mm.
- Also available as version with Safety-Kerfs and with extra-short T-2 thread (3mm):
Baader 2" / T-2 (M48) nosepiece with Safety Kerfs (#2458130 , € 45,-)