Baader Planetarium

• Baader Diamond Steeltrack (BDS-RT) for Refractors with 80 mm focus travel
• Minimum height (as supplied – incl. 2" clamp): 78 mm
• Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 65 mm
• Minimum height (with optional S58 ClickLock clamp): 89 mm
• Focuser weight (as supplied – incl. 2" Klemme): 1.160 g (40.9 oz)
• Adapters available or under development to fit a wide variety of refractor telescopes

Review on Stargazerslounge.com

• Fixed focal length of 5mm, 68° field of view – ease of view even at high magnifications!
• High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
• 1¼" and 2" barrels included, thus variable focal lengths
• Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible

• Maxbright II Bino rotation lock/auxillary-ring – for the shortest possible adaptation of the Maxbright^® II Bino directly onto all Baader T-2 star diagonals. 
• The adaptation via the M34-thread of the Maxbright^® II Bino is especially suited for telescopes with f/10 or slower, to directly screw the binoviewer onto the star diagonal
• This direct connection does not leave room for a Baader glasspath-corrector, but the shorter optical length may be just short enough to not needing a glasspath-corrector at all
• The T-2 Locking ring with lever - for MaxBright® II (#2458271 , € 36,-) is required for this adaptation
• This auxillary-ring allows the changing of the interpupillar distance without moving the locking ring

• 2" external thread to 1 ¼" internal thread reducter / eyepiece adaptor
• Strong grip with 2 screws and bronze clamp ideal for the heaviest eyepieces or cameras
• Additional T-2 thread on the 1 ¼" side allows connection of camera T-rings or T-2 adapter rings for the eyepiece. A separate T-2 ring protects this thread when not needed
• The telescope side front end includes a 48mm filter thread for 2" filters, and a T-2 thread.

• to connect to Meade instruments with 4" inner threads
• only suitable for BDS-SC Diamond Steeltrack® for SCs

• T-2/90° Baader Roof-Prism. Manufactured by Zeiss standard, both sides with T-2 system threads
• This Prism is multicoated and built in a solid metal body. T-2-thread on both sides, therefore extremely short and adaptable on every telescope-system.

• UFC tilter for an optimally flattened field of view
• Compatible with the entire Baader UFC system
• 0-1° tilt – allows a shift of up to 1° to compensate for misalignments in the image field
• 9.75 - 10.50 mm optical length

• Winged straylight-shield/ eyeglassprotector: Excellent stray light shield against side illumination, fast fold down of winged shield
• For Hyperion 68°&/Aspheric-eyepieces 31/36 mm - fits diam. 42 to 43 mm, 1.5mm min., clear-cut!
• Material: high quality silicone - non-aging, no chemical softeners, non smelling, not getting brittle over time

• Length: 350mm (14")
• Black anodized, without holes.
• Weight: 720g

• Schott RG 830 substrate with super stack dielectric coating
• for pure methane band transmission
• non-ageing sealed coating edges

• Set consisting of telescope-sided extra-short RASA 8 adapter, three additional screws as well as camera-sided adapter plate for Ø 90 mm QHY cameras (e.g. QHY 268 / 294), which is screwed onto the standard FCCT QHY flange for Ø 77 mm QHY cameras
• Allows to convert an existing Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) into a Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-) , if you purchase a new/additional camera
• Information about the conversion can be found in excerpts in the FCCT instruction manual

• 1¼ "/ T-2 eyepiece with fine focus (5mm focus travel)
• With three eyepiece clamping screws for fine centering - as well as rotation locking screw to secure the exact focus position
• Telescope side with T-2 internal thread
• For 1¼" eyepieces or connecters

• Handle for Telescopes
• Includes 2 piece 3" clamps
• to mount onto 3"(Losmandy style) dovetail

• gets mounted eyepiece-sided directly onto the SolarSpectrum filter and reduces the previously by the telecentric system extended focal length again by a factor of 0.7
• Working distance: 110mm (Distance to the camera sensor)
• 2" male threads on both sides, fitting Universal Flange Adapter #2958240 (included with SolarSpectrum H-alpha filters
• Telecompressor is used to adjust the focal length to possibly poor seeing conditions and / or enlarging the field for photographic- or webcam applications

• hand-painted earth globe with graduation to put on the gear box – electrically driven miniature motor for the earth and moon system
• Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.

• M68 changer for Zeiss adapter system

• Connection camera side to M68x1 female thread on the Port 1 of the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
• Designed and manufactured in Germany
• Connection on telescope side: 120 x 7.5 mm dovetail
• Black anodized
• Optical length: 0.5 mm
• Inner and outer diameter: M68x1i / D120 x 7,5 mm

• Baader Classic Ortho 18mm 1¼" Eyepiece, apparent field of view 52°, incl. winged rubber eyecup 52°,incl. winged rubber eyecup
• Parfocal Eyepiece series with very high transmission
• This eyepiece delivers a pure-white image with outstanding sharpness and contrast
• True High-Transmission- (HT) and Multi-Coating (MC) on all glass-air-surfaces offer a brilliant image while showing almost no internal reflections
• Suitable as projection eyepiece for OPFA (Eyepiece Projection adapter)

• M68 extension tube for classic eyepiece projection or Fluoride Flatfield Convertors (FFC)
• Telescope side M68x1 male thread
• Eyepiece-/camera side M68x1 female thread
• High-quality Aluminum, available in different lengths