Baader Planetarium

• Suitable for Celestron CGX and CGX-L mount
• Suitable for the  and Baader Hardwood Tripods as well as adaptable to Baader Steel Pillar with the Baader Medium Pillar (BMP) Levelling Flange for GM 1000 (#2451187 , € 425,-)
• Attention: for Adaptation on Baader Short Pillar III w/o Flange Adapter (#2451150 , € 260,-) the  Universal Base-Ring for Baader Short-Steel-Pillar III (#2451155 , € 61,-) is needed.

• made of V2A stainless steel
• for axis diameter of 30 mm
• Diameter 140 x H 30 mm
• 3kg

• Baader UFC S70 / M48 (f) Adapter
• telescope-sided M48 inner thread
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions

• Made for outdoor use at cold temperatures
• Interchangeable EU/US/UK wall plug included
• Output 12.8V DC/ 1.5 Amp (19 Watt), large power reserve even when cold - usable in temperatures from -25°C up to 40°C
• 2.5m (8.25') telescope cord incl. reverse polarity protected, elbowed protective-disconnect plug 5.5mm / 2.1mm
• Not waterproof IP40
• Successor model of the previous 19W Outdoor Power Supply #2457610 (discontinued).

• Baader Travel Companion - a Genuine Fluorite Apochromat in a compact mechanical design - the perfect „Travel Companion“. Made in Germany
• weight 3.1 kg, backfocus 150mm (210 mm w/o extension)
• 580 mm focal length (since 2020 – previous models have 560 mm focal length)
• Scope of delivery:
  • Baader APO 95/580 CaF2 Travel Companion
  • Baader 2" RT Diamond Steeltrack focuser featuring micro-geared high precision drive system with true diamonds, 80 mm focus travel and 1:10 reduction
  • 60mm removable tube extension - to enlarge the backfocus for binocular viewing to 210mm
  Tube rings and clamping plate not included

• Baader UFC 2" Filter Slider / Filter Container M48
• suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
• Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side

• Ready to fit Baader filters (standard outfit)
• Incl. large clear aperture 2" nosepiece and convertible T-2/M48 female threads
• Protects the Canon camera body from dust and moisture
• Scope of supply: Protective T-ring for CANON EOS, temperature compensation ring adapter S52 / M48, insert ring M48 / T-2, socket S52 / 2" (without filter)

• suitable for Zeiss 1b mount
• suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
• Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed

• Ultra short 1¼" eyepiece-clamp (w. brass locking ring)
• Optical length: 20mm
• Optimized for guiding camera, w. three set screws for utmost stability and for centering of undersized camera-nosepieces
• adapts onto male T-2 thread
• First introduced as part of our Vario Finder 10x60 – long avaited individual part within the Baader Astro T-2 family of adapters

• Baader Neutral Density Filters ND 0.6 / 0.9 / 1.8 / 3.0.
• For perfect energy management during Lunar and Solar observation. Suitable for solar observing only as an additional filter!
• If you need to reduce glare and want to use a filter ahead of the focal point (e.g. before a binocular), then the neutral density filters are just right.
• Fine optical polish results in no loss of sharpness at high magnifications even with a filter position 20-30cm in front of the focal point.
• Phantom Group coated. No ghosting, reflections or stray light.
• Threaded both sides of the glass allows combination with other filters (e.g. Baader Colour Filters).

• Z.B. zur Okularprojektion mit Schiebefokussierer
• Teleskopseitig T-2 Innengewinde
• Kamera-/Okularseitig T-2 Außengewinde
• In verschiedenen Längen erhältlich

• for adaptation of the Alan Gee II to Celestron SC 9,25
• Inner diameter 38mm, suitable for Alan Gee II Telecompressor # 2454400
• Outer diameter 45.5mm
• centers the Alan Gee II telecompressor in the eyepiece socket.Clamping the Alan Gee is done as usual with the Celestron Visual Back or other 2"/ T-2 adapters

• converts any 2" (SC) female thread into a M41.5 x 1 female thread - without extending the optical length
• manufactured to adapt our Hyperion Universal Zoom Mark IV straight onto any spotting scope - such as Bausch & Lomb-, Opticron- and Kowa-Base - equipped with M41.5 male thread (see animation on the right)
• Note: for fitting the optical nose of the Zoom into the receptor at some spotting scopes, the thin dust cover ring needs to be removed - see images
• Adapter with continuous 2" male and M41,5 x 1 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )

• Coma corrector for Newton telescopes, that reduces neither the focal length nor the image field of your telescope
• Large lenses for completely vignetting-free exposures up to f / 3.5. Maximum sharpness over the entire image field
• Phantom Coating™ Group multicoated for maximum transmission and total freedom from reflections
• Next to the photographic only version, there is also a visual version that contains all parts of the base elements as well as additional adapters for visual application:
  • 2458400A: Photographic Version with removable 2" Stoppring, usable either with T-2 (M42x0.75) or M48x0.75 connection
  • 2458403: Visual Version (V-1 Set) contains all parts of the photographic Version MPCC Mark III #2458400A as well as 1¼" to T-2 focusing eyepiece clamp (#2458125) and adjustable VariLock T-2 extension tube 20 – 29 mm (#2956929)

Please note: This set replaces the former set #2458402 for visual and photographic application of the MPCC Mark III. The old set consisted of a multitude of rings – but was not adjustable in optical length such as this V-1 set.

The idea for this new and much more versatile set was born after we received this detailed question regarding eyepiece adaptation on MPCC, where we recommended our VariLock and focusing eyepiece clamp as best accessories.

• Adapter for spotting scopes made of ABS, for Sky-Surfer III
• to mount between spotting scope and photo tripod
• Single price. Included in scope of supply of Sky Surfer III

• T-2/90 ° diagonal prism (BaK4 glass) with 35mm free aperture terminal objective side: 2 "or 1¼"
• Connection eyepiece: 1¼ "
• Prism made in accordance to Zeiss-norms, multi-coated, solid metal case, both sides T-2 connection threads, resulting in extremely short design and adaptable to each telescope system.
• Not just the housing is significantly better and the prism is greater, also the planarity and the conformality of the prism faces are about 5x better than standard prisms in plastic housings.

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height: 150 mm

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.

• Temperature sensor to compensate the drift automatically, if there are large temperature differences
• Temperature sensor with phone connector and 1m cable, also supports control of dew-shield-heating
• Can be used with Steeldrive II motor units or Steeldrive II controller
• One sensor is included in the scope of delivery of the Steeldrive II  motor focuser with Controller (#2957165)