Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451106
€ 100.00 Price excl. German VAT tax (19%): € 84.03- GP-Tripod-Adapter / GP-Pillar-Flange-Adapter suitable for Vixen-SP/GP- and -GP-DX, Celestron Advanced-GT, EQ5, HEQ-5 Mounts, Bresser, Sky-Watcher
- suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
- gets mounted directly on Baader Short Pillar III, the Universal Flange-Basis (#2451155) is NOT needed in this case
-
# 2954250
€ 20.00 Price excl. German VAT tax (19%): € 16.81- M43/M43 extension (distance ring), suitable for Morpheus, Hyperion and other eyepieces/adapters with M43 outer thread
- Optical length: 7,5mm
- With this extension the distance of the foldable, as well as the winged rubber eyecup can then be finetuned to optimum height. Also this helps to keep any smartphone holder to firmly clamp over the exiting eye-lens. In addition multiple of these M43- rings may be added to achieve the optimum distance to your camera chip for eyepiece projection.
-
From: € 121.00 Price excl. German VAT tax (19%): € 101.68
- NOT suitable for visual solar observation. Only use for digital imaging with all high-end telescopes and extreme tele-lenses (lucky imaging technique). Suitable for highest magnifications and detailed imaging of individual sunspots
- AstroSolar PHOTO Film OD 3.8, mounted stress free in temperature compensated cell
- No astigmatism during winter observation or with temperature changes in summer
- Scope of Supply: BDSF (ASTF) Filter with apertures from 80 to 180mm (200 – 280mm not yet available) come with two sets of centering bolts in 38mm length. 3 bolts with 10mm diameter and 3 bolts with 20mm diameter, adjustable to the tube diameter of your telescope or dew cap. In addition three safety straps with glue-pads and three rubber plugs to cover the holes that are not used, mounting instructions.
-
# 2454306
€ 9.00 Price excl. German VAT tax (19%): € 7.56- SR41W/1.55V 10 pc
- For illuminator
- Not for VarioFinder
-
# 2458252
€ 46.00 Price excl. German VAT tax (19%): € 38.66- With the S52/M68 adapter, all Baader Wide T-rings can be adapted directly to an M68 female thread. This allows your M68 telescope or accessories to be screwed firmly to your camera with the largest possible aperture.
- The S52/M68 adapter fits all S52 dovetail clamps (D52) - for example our S52-Clicklock #2956252 or the Canon Protective T-Ring #2958550
- Camera-side: S52 dovetail
- Telescope-side: M68x1 male thread
-
# 2408319
€ 30.00 Price excl. German VAT tax (19%): € 25.21- Baader T-Ring to connect Canon EOS DSLR cameras on the Astro T-2 system
- Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
- On the camera side: Canon EOS Bayonet
- Telescope side: T-2 internal thread with 0.75mm pitch
-
From: € 315.00 Price excl. German VAT tax (19%): € 264.71
- Multi-Purpose Variofinder 10x60 with Astro Lens and 45° erect image prism and 25mm eyepiece with illuminated measuring recticle, 4,5° field of view
- 61mm aperture with Baader Phantom Group Coating, 250mm focal length, 1:4.1 focal ratio
- Can be used also as guide scope or 60mm spotting scope
- Including EQ dovetail/Tripod adapter
- The Baader MQR can be used either in full height or in a low profile configuration
- The V-dovetail and ring-base-plate of the MQR-finder-holder can be directly mounted onto each other without the intermediate spacer, with the help of two (optional) M5x12 mm screws. This allows to use the finder in a low profile configuration as it is desirable for Schmidt-Cassergrain OTAs
- The spacer itself is equipped with a mini-weaver-style dovetail so that it can carry a SkySurfer III or SkySurfer V red dot finder as well
-
# 2455037
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Baader RS-232 cable for NexStar - made in Germany
- Connects the RJ 11 port of your hand control to the RS 232 port of your PC.
- Necessary to upgrade the Flash EProm Hand Controller and to control the telescope e.g. over NexRemote.
- If your PC / laptop no RS 232 interface, you also require the USB - RS 232 converter cable
-
# 2458239
€ 57.00 Price excl. German VAT tax (19%): € 47.90- Adapter with M68i x1 to M63a x1 male thread, to adapt M68 parts to Starlight Instruments Feathertouch 2.5" and TS-Optics (Photo Line) focusers with M63 x 1 female thread
- Changes a M68x1 (Zeiss) male thread into a M63 x 1 male thread
- Part is used in our M63a x 1 ClickLock clamp #2956263
- Optical height: 7,3 mm, Inner diameter (clear aperture): 58 mm
-
# 2958037
€ 19.00 Price excl. German VAT tax (19%): € 15.97- DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
- SP54i / SP54a extension ring for connection required! (Item #2958090)
-
# 2957235
€ 6.00 Price excl. German VAT tax (19%): € 5.04- Long, 1.5mm thick washer ("strip shims") to adapt Baader VersaBase to different tube sizes
- Dimensions: 110 x 12 x 1.5 mm (length x width x height)
- Already included four times in the BDS-NT or Baader VersaBase (the base of our BDS-NT Diamond Steeltrack®) scope of delivery
- Only suitable for BDS-NT Diamond Steeltrack® for Newtonians
-
# 2457011
€ 47.00 Price excl. German VAT tax (19%): € 39.50- Universal Red Dot Mount RDM – holder for red dot finders with 70 mm height, includes Standard Base
- All metal design (rail part & base part)
- Weaver gun-rail standard 11mm standard gun rail – fits all Red Dot finders
- V-shaped dove-tail fits most finder-shoes of Celestron, Sky-Watcher, Vixen and Bresser telescopes, includes Baader Standard Base #2457000 to fit all telescopes with one or two mounting screws
-
# 2459146
€ 276.00 Price excl. German VAT tax (19%): € 231.93- UFC tilter for an optimally flattened field of view
- Compatible with the entire Baader UFC system
- 0-1° tilt – allows a shift of up to 1° to compensate for misalignments in the image field
- 9.75 - 10.50 mm optical length
-
# 2958085
€ 5.00 Price excl. German VAT tax (19%): € 4.20- To adapt DSLR T-Rings onto Clickstop-Zoom eyepiece
- The only ring with direct transition from the SP54 system thread to T-2a (M42x0.75)
Last stocks: This products are available at this reduced price on our bargains list. Offer valid while stocks last.Learn More -
# 2451530
€ 48.00 Price excl. German VAT tax (19%): € 40.34- V-dovetail, 70mm diameter
- Pairing Vixen / Synta / SkyWatcher / Celestron / Baader V - for GIRO II
- Massive EQ-clamp, black anodized, Weight: 150g
- To accommodate all terminal strips of Vixen GP / GPDX, Bresser, Synta, Skywatcher
- Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)
-
# 2459212
€ 95.00 Price excl. German VAT tax (19%): € 79.83 -
# 2459075
€ 80.00 Price excl. German VAT tax (19%): € 67.23- Set consisting of telescope-sided extra-short RASA 8 adapter, three additional screws as well as camera-sided adapter plate for Ø 90 mm QHY cameras (e.g. QHY 268 / 294), which is screwed onto the standard FCCT QHY flange for Ø 77 mm QHY cameras
- Allows to convert an existing Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) into a Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-) , if you purchase a new/additional camera
- Information about the conversion can be found in excerpts in the FCCT instruction manual
-
# 1508041
€ 41.00 Price excl. German VAT tax (19%): € 34.45- Combo of Zeiss M44 female and T-2 female thread
- Threaded reducing M44 to T - 2
- Zeiss threaded ring M44 internal thread on T - 2 internal thread
- So you can use components with M44 connection thread to each T-2 diagonal prism / Zeiss mirror.
-
# 2451310
€ 196.00 Price excl. German VAT tax (19%): € 164.71- Telescope adapter for Hedrick focuser 3.5" for PlaneWave CDK 14/17/20/24" to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
- Designed and manufactured in Germany
- Connections on camera side: 120 x 7.5 mm dovetail
- Black anodized
- Optical ength: 0.5 mm
- Internal and external diameter: D120a/ D82,5i
-
# 2951406
€ 158.00 Price excl. German VAT tax (19%): € 132.77- made of V2A stainless steel
- with CDP = Camera Docking Port, 28,7mm diam., ¼" photo-thread
- Ø140x60mm, bore Ø 28,7mm – may be extended up to Ø 56mm
- 6kg