Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2904010
€ 6.50 Price excl. German VAT tax (19%): € 5.46- Dustcap with T-2 (M42 x 0,75) female (inner) thread
- Robust cap made of black, high-quality plastic
- Dustproof closure for your accessories of the Astro T-2 system
-
# 2408336
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Baader Wide-T-Ring Canon R to connect Canon EOS R cameras on the Astro T-2 system and S52 dovetail
- All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
- The illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
- On the camera side: Canon R Bayonet
- Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch
-
# 2454827
€ 365.00 Price excl. German VAT tax (19%): € 306.72- Consists of Hyperion Universal Zoom Mark IV, 8-24mm eyepiece and Hyperion Barlow lens 2.25x
- This combination of Hyperion Zoom and Hyperion Barlow creates an all-in-one astro quality grade zoom providing a focal length range (with and without Barlow) from 3.6 to 24mm
- Includes all accessories that is delivered in the standard outfit of the Hyperion Zoom and Barlow
- More Information about Hyperion Universal Zoom Mark IV
- More Information about Hyperion Barlow lens 2.25x
- ATTENTION: Please note that this set of Zoom+Barlow is only meant for astronomical use. It will not come to focus in combination with spotting scopes
-
- AllSky Dome: Allows to view the whole sky at 180° maximum opening
- Resists windspeeds of up to 250 km/h
- Suitable for rough environments and autonomous / robotic functionality
- 10 years warranty if handled correctly
- Available in sizes: 2,3 / 3,5 / 4,5 and 6,5 Meter
-
From: € 55.00 Price excl. German VAT tax (19%): € 46.22
- ADPS – Afocal Digital Projection System ( I - VII )
- Delivery without projection eyepiece
- For digital imaging with cameras and/or camcorders
- Consist of base version ADPS (single parts see ADPS IV) and additional lens sided adapters on other ADPS versions
-
# 2451172
€ 255.00 Price excl. German VAT tax (19%): € 214.29- Height 20 mm + leveling space 30-50 mm, incl. ground sill anchor
- Sutiable for the following Baader Medium Pillar (BMP) Levelling flanges:
- Baader Medium Pillar (BMP) Levelling Flange For AstroPhysics 1200/1600 Mount (#2451173 , € 398,-)
- Baader Medium Pillar (BMP) Levelling Flange for GM 2000 and AP 1100/900 GTO Mounts (#2451171 , € 445,-)
- Baader Medium Pillar (BMP) Levelling Flange For ME/ME II Paramount Mounts (#2451180 , € 380,-)
- Baader Medium Pillar (BMP) Levelling Flange For Paramount MX (#2451181 , € 445,-)
- Baader Steel Levelling Flange for ALT 5ADN mounts (#2451160 , € 329,-)
- Baader Steel Levelling Flange for ALT 7ADN Mounts (#2451161 , € 329,-)
The Baader levelling flange base is used to mount Baader leveling flanges on customer-provided pillars. Fastening material is included.
Learn More -
# 2957165
€ 665.00 Price excl. German VAT tax (19%): € 558.82- High-precision, temperature-compensating focusing motor with toothed belt drive for heavy loads (up to 8 kg).
- Prepared for connection to all Baader Steeltrack® focusers (classic and Diamond).
- Contactless end sensor (homing switch) for precise, repeatable positioning to stored absolute positions
- Incl. hand controller with intuitive operation, can alternatively be controlled via PC with USB interface via ASCOM or SteelGO software (for Windows)
- Connection for temperature sensors and additional 12 V / 1A PWM current output, e.g. for dew cap heater
-
# 1451070
€ 186.00 Price excl. German VAT tax (19%): € 156.30- Input Voltage 110-240 volts, output voltage 24 V / 5 amps (factory setting)
- Connection cable fitting for GM 1000 HPS mount
- Short circuit protection
-
From: € 58.00 Price excl. German VAT tax (19%): € 48.74
- SC-Deluxe clamp with 2" Schmidt-Cassegrain Innen thread - available with 2" filter holder or 60mm extension incl. filter holder
-
# 2455025
€ 135.00 Price excl. German VAT tax (19%): € 113.45- Grid Filter for electronic devices
- Protects your astronomical equipment (especially mounts) for high-frequency voltage peaks in the network
- Is plugged directly into the socket (230V) between the connection cable of the device
- max. Connected Load oder Power Output?? 1000 W (4A)
- Total length 87,7 cm (without plug)
- Immediately ready for operation after insertion
-
# 2000317
€ 33.00 Price excl. German VAT tax (19%): € 27.73- Sun replacement halogen bulb - without socket.
- Custom made with sprue spigot at the bottom to allow projection. This bulb is not freely available in stores.
- Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
- Please use only this bulb, otherwise you may destroy the transformer of the device, which due to its size can not output more light power. For continuous operation (3 hours and more), the medium light level must be used.
-
# 2459113
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Baader UFC Filter Slider / Filter Container D50.4
- suitable for unmounted, round 50.4 mm filters (for Filter-Ø 50 mm up to 50,5 mm)
- slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
-
# 2408166
€ 27.00 Price excl. German VAT tax (19%): € 22.69- Allows mounting of Baader 2" filters
- Needs Hyperion DT-rings #2958028 - 2458062 and additional Stepper Rings M67 up to M82
- All Baader 2" filters in version M48 thread can be customised with specific extension tubes on almost all DSRL lenses.
-
# 2451107
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen Sphinx mount
- suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
- also fits onto Vixen-, Bresser- or Sky-Watcher tripods
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2458211
€ 145.00 Price excl. German VAT tax (19%): € 121.85- Baader M68 VariLock Extension 15-20mm
- Continuosly (stepless) adaptable M68 extension with millimeter scale for fine-tuning of the optical height between 15 and 20mm in the M68-system
- telescope-sided with M68 male (outer) thread
- camera-sided withM68 female (inner) thread
-
From: € 118.00 Price excl. German VAT tax (19%): € 99.16
- Baader 7.5 nm Solar Continuum Filter, CWL 540nm
- A must for owners of achromatic refractors. This narrowband-filter cuts the spectral range where lens optics draw sharpest and contrastiest. The Baader Solar Continuum Filter lets you use the full power of your telescope.
- Enhances contrast and reduces the effect of atmospheric turbulence (in combination with white light solar filters)
- Enormous contrast gain in monochrome photography even on apochromatic systems
- Important note: The Solar Continuum Filter must be used ONLY with additional filtering (e.g. Baader Herschel prism or AstroSolar Safety Film)
-
# 2454307
€ 6.00 Price excl. German VAT tax (19%): € 5.04- SR41W/1.55V 10 pc
- For illuminator
- Not for VarioFinder
-
# 2459135
€ 253.00 Price excl. German VAT tax (19%): € 212.61- Baader UFC S70 / RASA 36cm (14") Adapter
- telescope-sided RASA 36cm-plate
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
-
# 2454601
€ 80.00 Price excl. German VAT tax (19%): € 67.23- Eyepiece case with pre-punched compartments for up to eight eyepieces
- Suitable for Morpheus and Hyperion eyepieces
- Eyepieces NOT included
-
# 2957304
€ 7.00 Price excl. German VAT tax (19%): € 5.88- Adapter for large telescopes made of ABS, for Sky-Surfer III
- fits onto Celestron, Vixen, Skywatcher-Norm
- Single price. Included in scope of supply of Sky Surfer III