Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2450050
€ 37.00 Price excl. German VAT tax (19%): € 31.09- US-Norm Allen wrench keySet, precision quality with ball-head
- The complete set includes the following allen wrench keys: 5/16 - 1/4 - 7/32 - 3/16 - 5/32 - 9/64 - 1/8 - 7/64 - 3/32 - 5/64 - 1/16 - 0,05 inch
-
# 2408153
€ 28.00 Price excl. German VAT tax (19%): € 23.53- 2" to 1¼" reducing piece with Bronze pressure ring and 8,5mm optical height
- Suitable for 2" focusers and clamps (e.g..: RT / SC Diamond Steeltrack or ClickLock 2" Mirror Diagonal)
- Includes clamp screw, safety nut and 2" filter holder (M48 inner thread)
-
From: € 16.00 Price excl. German VAT tax (19%): € 13.45
- AstroSolar® Safety Film 5.0 for solar observation and photography at high magnification, telescope quality, Optical Density (OD) = 5.0
- Safe for visual solar observation (with additional optics) and imaging
- This highest precision film consistently produces strehl ratios of 94 to 96 percent at interferometric tests – thus it performs optically like a Fluorite Triplet Lens by Carl Zeiss or Astro Physics
- AstroSolar Safety Film is best suited for precision work with all astronomical telescopes and binoculars – just as well as for all photographic camera- and tele-lenses
- For more than 25 years on the market, the only film-material made to not deteriorate the optical wavefront, it does allow to attain high magnification with any long-range optics without reducing sharpness or contrast of the solar surface.
-
# 2451155
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Universal Base ring: fits Baader Tripod-Adapters onto short Steel-Pillar III
- Hole diameter 77mm, 6x M5 inner threads
-
# 2958244
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Low profile adapter 2"i to T-2a, featuring just 1.5mm optical length
- changes a 2" SC (50,8mm) male thread into a fixed T-2 (M42x0.75) male thread
- allows shortest possible rigid T-2 adaptation onto any 2"SC-thread. Ideal to mount a T-2 (Zeiss-norm) TQC/TCR HeavyDuty Quick-Changer-System #2456322
- as option for a rotatable SC/T-2 connection we recommend #2958500B SC/HD Ultrashort T-Adapter, featuring 7mm optical
-
# 2958515
€ 39.00 Price excl. German VAT tax (19%): € 32.77- 1" (25.4mm) C mount, coupled with a 31.8 mm (1¼") socket
- 18mm insertion length (with integrated 1¼ "filter mount - M28.5)
- also incl. Retainer-Ring to permanently hold one unmounted Filter from 27.5 to 28mm in diameter
-
# 2451558
€ 689.00 Price excl. German VAT tax (19%): € 578.99- Baader sidewings are connected to the side (left, both sides or right) of the 8" Planewave terminal #2451555.
- Side plates/clamps can be placed on the sidewings, eg: Baader base plate 400mm # 1500340 or Baader Pan EQ clamps 190mm, 230mm and 370mm
-
# 2454613
€ 165.00 Price excl. German VAT tax (19%): € 138.66- Fixed focal length of 13mm, 68° field of view – ease of view even at high magnifications!
- High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
- 1¼" and 2" barrels included, thus variable focal lengths
- Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible
-
From: € 6.50 Price excl. German VAT tax (19%): € 5.46
- Astro T-2 System spacer (Fine-Adjustment) rings, available in thickness 0,3mm (black), 0,5mm (red), 1mm (gold)
- Very thin ring for finetuning in T-2 eyepiece projection
- Rings with T-2 inner diameter without threads
- Fits between all T-2 threads, equals approx. 2/5 (0,3mm), 2/3 (0,5mm) respectively 1 1/3 (1mm) turn of rotation. Rotation may differ slightly.
- Prevents binding between two T-2 threaded parts
-
From: € 89.00 Price excl. German VAT tax (19%): € 74.79
- O-III Super-G filter with 9 nm FWHM and a maximum transmission of 97%.
- For visual and photographic observation of planetary nebulae and supernova remnants, even with small telescopes
- Can be used as a "Super-G filter" replacement for RGB photography. While regular G-filters suffer from bad seeing due to air turbulences, the narrow range of 9 nm passes less thermal noise, i.e. sharper images. Nevertheless, the transmission window is large enough not to be considered a pure narrowband filter.
- CMOS-optimized coating technolog with much steeper slopes of the filter passband - for increased contrast, longer life and to avoid reflections.
-
# 2957283
€ 39.00 Price excl. German VAT tax (19%): € 32.77- to connect to Skywatcher Refractors with M90x1 outer threads
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
- Also fits RC telescopes with M90 thread, but may require an extension, otherwise the BDS-RT Steeltrack may not retract completely. See also the application picture and the following review of the BDS-RT Steeltrack: Fitting a 2-inch BDS-RT Baader Diamond Steeltrack Focuser to a Teleskop-Service GSO 8-inch Ritchey-Chretien
-
# 2456314Z
€ 122.00 Price excl. German VAT tax (19%): € 102.52- Glasspathcorrector Factor 1,25. Focus gain: ca. 20mm Insert diameter: ∅ 38 mm
- Suitable to insert into the Baader MaxBright® II Binoviewer or Mark V Großfeld (Giant)-Binocular (#2456410 , € 1425,-)
- A Baader Glaspathcorrector is not a Barlow lens! The reason for this name (in Germany the name Glaswegkorrektor® is a protected trademark by Baader Planetarium) is only secondly the displacement of the focal point
- A Glaspathcorrector is primarily intended to correct the prismatic color fringing that occurs on Refractors due to the high amount of glasses used in binocular prisms
- Please note: The Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) is the only Baader-Bino where you can choose between Zeiss ring-dovetail and T-2 thread adapter.
-
# 2459088
€ 39.00 Price excl. German VAT tax (19%): € 32.77- 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- Also available as set containing of four 36 mm filter holders: 4x filter holder 36 mm for Baader FCCT (3D-printed) (#2459098 , € 134,-)
-
# 2458060
€ 48.00 Price excl. German VAT tax (19%): € 40.34- DT Adapter III, M68a / SP54a extension adapter M68
- Digital T Adapter System III of M68_a on SP54_a Shortest adaptation for Telecentric system or the fluoride Flatfield Converter (FFC).
- This adapter fits to the M68 (Zeiss) ring system - see at FFC (fluorite Barlow) -. Eg to a DSLR camera using the digital T-rings to mount the FFC as short as possible.
-
# 1501625
€ 152.00 Price excl. German VAT tax (19%): € 127.73- Length: 610mm (24")
- Black anodized, without holes.
- Weight: 1250g
-
# 2458550
€ 2,360.00 Price excl. German VAT tax (19%): € 1,983.19- Two different reflection gratings for high light output
- The spectral resolution (lambda / delta lambda ~ 500) allows precise spectral classification of stars
- The whole visible and near infrared spectral range (350nm - 950nm) can be covered with a SBIG ST-7
- Included in standard delivery:
- DADOS: Baader Blaze Reflection Gratings 200 L/mm (#2458557 , € 232,-)
- DADOS 10mm Guiding Eyepiece (#1304110 , € 34,-)
- DADOS 20mm Positioning Eyepiece (#1304120 , € 34,-)
- DADOS: Baader Carrying Case for DADOS and accessories (#2452110 , € 83,-)
- further scope of delivery see product description
-
# 2458230
€ 53.00 Price excl. German VAT tax (19%): € 44.54- Reducing piece: M68a to M54a for direct connection of M54 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available) ) to the M68 system
- Converts the M68 (Zeiss) female into a M54 male thread
- Telescope side M68 male thread, eyepiece side M54male thread
- Optical length: 5 mm
- Inner diameter: 51 mm, outer diameter: 76 mm
-
# 1508020
€ 31.00 Price excl. German VAT tax (19%): € 26.05- Converts 2" female into 2" male thread
- Internal M48 Filter thread for 2" filter
- Can be used to connect Baader Hyperion Mark III Zoom directly to a Baader Star Diagnol gaining adfitional backfocus by swapping ClickLock-clamp for this adaptor.
-
# 2451745
€ 85.00 Price excl. German VAT tax (19%): € 71.43- V-dovetail rail with radius and with holes for 9" SC/HD and 11" SC/HD
- Only suitable for SC and HD OTAs with new round backplate. (For Celestron OTAs with the old flat backplate please use the Baader V rail / dovetail bar 470mm for SC (#2451101 , € 83,-)
- Length: 455mm
- Drilled and includes mounting screws for Celestron 9" SC/HD and 11" SC/HD
- Orange anodized
-
- 3" / V or Z dovetail bars in customer specified lengths (up to 6000mm)
- Upon ordering please tell us exactly what the bar is used for, in order for us to make the correct drillings
- Optimum would be a drawing which states the requested drilling diameter (better too big than too small)
- The price is € 2,- per centimeter (1mm = 0,20 € ) If you need a dovetail bar in 40cm (400mm) length, the price would be € 80,-
- Black anodizing possible: please let us know upon ordering. Costs can be found at the order form
- Drillings of up to six holes or thread as per your needs. Prices for complicated drilling patterns, special milling or countersinking etc. will be discussed before production