Baader Planetarium

• M68 changer for Zeiss adapter system
• Hardened steel - no impressions in the mating surfaces of the dovetail may occur even with the greatest burden

• V (EQ) with centrally milled slots
• Length: 120mm
• Base width 44mm
• Fits Vixen, Celestron, Skywatcher and other mounts
• Black Anodized

• Baader Turbo Film 127x51cm (Optical Density: 0,1). Use to protect your telescope and optical equipment against dust and humidity – without reducing the optical quality
• This is the essence of AstroSolar safety film. A highest precision, crystal clear material (not “Mylar”).
• It is a monomer film which we found after thoroughly testing more than 200 different film samples on our Zeiss autocollimator. This film was used in german Science Institutes as optical membrane for nuclear and particle physics experiments. The basic substrate has been further refined and homogenized by a proprietary annealing process that was developed exclusively for us.
• Due to these treatments Turbo Film attains perfect homogeneity and performs equal to a 1/10 wave plane parallel optical window. In fact it has the lowest wedge error of any existing optical window. TurboFilm will protect your valuable optical equipment, close telescope tubes against dust and humidity, greatly reduce air currents – all without reducing the optical quality of your telescope.

• Conversion of the lamp socket of the electrically driven solar system (tellurium) of an already purchased  The Original: Baader Planetarium (#2000000 , € 2450,-) to be able to mount the modern sun globe, glass with screw thread. Please note on the right, the simple plastic version, which was only plugged on the base, is no longer produced.
• Labour time for the conversion includes fitting the new socket as well as the socket itself and includes the Sun globe, glass with screw thread (#2000308 , € 42,-)
• If an old Osram projection lamp is still used  Replacement bulb (halogen) with ceramic holder (#2000316 , € 48,-) must be purchased separately.
• Please note the Instructions for secure Packing of the Tellurium of a Baader Planetarium for Shipping

• This M48-spacer ring is necessary for connecting the MPCC Mark III coma corrector at Baader Protective Canon EOS T-Ring
• Use the full aperture of the M48 thread instead of M42 – in conjunction with the Baader protective CANON T-Ring
• This M48 spacer ring is the necessary addition in order to mount the MPCC Mark III directly onto the Baader protective EOS T-ring while securing the correct optical distance of 55mm and by utilizing the full M48 unvignetted aperture

• Compact, mobile rotary stage for adjustment of 3" or 8" PAN EQ clamps on double mounting plates or mounts of the L-Mount series.
• Makes it possible to adjust the optical axes of parallel mounted telescopes to each other.
• Mounts parallel to the main telescope on the side of the dual mount or on the side port of a PlaneWave L-mount to align and simultaneously operate secondary telescopes such as RASA-, or Newtonian telescopes parallel to the main telescope in the azimuthal or equatorial configuration. To connect the PAN adjuster to the L-350 mount, the Adapter to mount PAN-Adjuster to PlaneWave L-350 (#2451516 , € 143,-) is required.
• Push pull screws allow to adjust the angle of the installation plate to the rotation plate.
• Adjustment screws allow to adjust the rotational angle between the attachment plate and the rotation plate
• Cutouts and hole in the middle allows for cabeling
• Made of solid Dural Aluminum and connected with stainless steel clamping rings.
• Developed and manufactured at Baader Planetarium in Germany.

• Polaris I, 25mm measuring & guiding illuminated eyepiece, batteries included
• with universal T-2 thread (thread adjustable)

• for safe storage and transport of the Mark V Großfeld-Binocular
• to upgrade older models. Since 2014 included in scope of supply of the Mark V Großfeld-Binocular
• Also fits for the Maxbright Binokular

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.

• Baader S-II f/3 Ultra-Highspeed Filter – Premium Grade
• 4 nm FWHM, recommended for fast optical systems from f/3.4 to f/2.3
• Specially designed for the special filter requirements when used with fast f/3 optics
• For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• A Solar Shade made from Aluminium to clamp between any T-2 connection
• T-2 drilling (ø 42 mm)
• Use as shade (glare protection) for visual observation / imaging through eyepiece or camera
• Used to shade the eyepiece or camera viewing opening from direct solar radiation during photographic- or visual solar observation in the H-alpha region with narrowband filters from SolarSpectrum

• 1¼" filter holder, to use smaller filters or other parts (barlow lenses, reducers) with 1¼" filter thread in the path of light
• Consists of:
•   Baader T-2 Conversion Ring (#2958110, € 29,-)
•   Baader Double T-Filterholder 1¼" (#1508030, € 33,-)
•   T-2 Fine-Adjustment ring 1mm (gold) - Aluminium (#2457913, € 6,50)
•   Baader Expanding Ring T-2f / M48m (T-2 part #29) (#2458110, € 22,-)

• Focal lengths Fine Tuning for Hyperion eyepieces (all focal lengths)
• Optical path length 28mm
• Spacer rings fit between the negative lens and the 2 "barrel, so that it matches the respective eyepiece to your needs.
• The 13 mm eyepiece transform e.g. no loss of quality in a 9- or 11 mm eyepiece.

• Baader S-II f/2 Ultra-Highspeed Filter – Premium Grade
• 4 nm FWHM, recommended for extremely fast optical systems from < f/2.3
• Specially designed for the special filter requirements when used with extremely fast f/2 optics like the Celestron RASA astrographs
• For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• 2" BBHS star diagonal with 2" ClickLock terminal and black case. Provides greatest reflectance over most spectral range from 390 to 2000nm
• Including Baader 2" Safety Kerf nosepiece with 2" filter thread (#2408156 , € 43,-) with additional grip and security from inadvertent slipping.
• Much higher in brilliance than standard dielectric coatings
• BBHS = Broadband Hardsilver coating with dielectric protective overcoating
• T-2 BBHS-Sitall zenith mirrors on both sides with T-2 Photo thread

• 47.4 mm (2" w/o cell) x 2 mm Baader CMOS S-II f/2 Ultra-Highspeed Filter – Premium Grade
• 2" Filter removed from filter cell, specially selected for use with 2" Filter sliders of the Baader FCCT (Filter Changer Camera Tilter) for RASA 8" and QHY cameras (various versions available)
• 4 nm FWHM , recommended for extremely fast optical systems from < f/2.3
• Specially designed for the special filter requirements when used with extremely fast f/2 optics like the Celestron RASA astrographs
• For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• Coma corrector for Newton telescopes, that reduces neither the focal length nor the image field of your telescope
• Large lenses for completely vignetting-free exposures up to f / 3.5. Maximum sharpness over the entire image field
• Phantom Coating™ Group multicoated for maximum transmission and total freedom from reflections
• Next to the photographic only version, there is also a visual version that contains all parts of the base elements as well as additional adapters for visual application:
  • 2458400A: Photographic Version with removable 2" Stoppring, usable either with T-2 (M42x0.75) or M48x0.75 connection
  • 2458403: Visual Version (V-1 Set) contains all parts of the photographic Version MPCC Mark III #2458400A as well as 1¼" to T-2 focusing eyepiece clamp (#2458125) and adjustable VariLock T-2 extension tube 20 – 29 mm (#2956929)

Please note: This set replaces the former set #2458402 for visual and photographic application of the MPCC Mark III. The old set consisted of a multitude of rings – but was not adjustable in optical length such as this V-1 set.

The idea for this new and much more versatile set was born after we received this detailed question regarding eyepiece adaptation on MPCC, where we recommended our VariLock and focusing eyepiece clamp as best accessories.

• Additional Protective-Disconnect Connecting Cable, 12V 0,5 m for 60W OTP 2457630/40
• 1x included in 60W OTP scope of supply

• Baader Stainless steel 3/8″ to 1/4″ Photothread-Reducer
• made of V2A stainless steel
• This photothread-reducer of stainless steel serves to change – for example – the small photothread of your tripod-adapterplate into a large 3/8" thread.