Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2457633
€ 8.50 Price excl. German VAT tax (19%): € 7.14- Additional Protective-Disconnect Connecting Cable, 12V 0,5 m for 60W OTP 2457630/40
- 1x included in 60W OTP scope of supply
-
# 2451109
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen AP mount
- suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
- attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition
-
- Classic Baader Slit-Dome for the amateur field, with electronic motor
- Built of hardened and lightweight glassfiber polyester, serves as Wind-, Light- and Weather-protection
- 10 years warranty on Storm-resistance up to 200km/h, many additional features and acccessories available, please ask us
- Dome sizes: 2,1 Meter to 3,2 Meter outer diameter
-
# 2458216
€ 133.00 Price excl. German VAT tax (19%): € 111.76- 3.3" / M68 changer ring
- To connect M68 (Zeiss) accessories onto 3,3" (Celestron/Meade) focusers
- only 11,5mm optical height
- Combination of parts 3,3" Celestron nut (#2408145) and M68 V-Dovetail ring (#2458215)
-
# 2450305
€ 22.00 Price excl. German VAT tax (19%): € 18.49- Robust and torsion-resistant binocular holder (L-shaped tripod adapter) made of 4 mm thick steel (no plastic, no aluminum)
- In contrast to many L-shaped bino-holders which are made from less rigid materials, the Bino-Stronghold enables the jitter-free mounting of binoculars (with ¼" thread in the binocular bridge) onto any tripod equipped w. ¼" photo-thread
- The "Stronghold" steel binocular-holder has a particularly slim design to accommodate small interpupillary distance for any binocular. Other "L-brackets" made of aluminum are much too bulky to allow the binocular to fold down and reach the innermost 10 mm of pupil spacing
- excellent in combination with the SkySurfer III red dot finder, as well as e.g. the Celestron SkyMaster 15x70 binocular
-
# 2451055
€ 399.00 Price excl. German VAT tax (19%): € 335.29- Mit 500 mm optischer Länge und Verschlüssen
- Passend für alle Celestron 14" Schmidt-Cassegrain und EdgeHD Teleskope
- Hilft bei der Vermeidung von Taubildung auf der Schmidt-Platte
- Lange Ausführung zum Schutz vor dem Eindringen von Streulicht in das Tubusinnere
- Stabile Ausführung aus Metall mit zwei Schnellspannern zur einfachen Montage
-
# 1500340
€ 387.00 Price excl. German VAT tax (19%): € 325.21- Sidewing-Baseplate 400mm for Guidescope-Rings, Size III
- Balancing, 400mm long baseplate, fits onto Baader-Sidewings.
- 1kg Baader balancing weights #2951401
-
# 2459122
€ 96.00 Price excl. German VAT tax (19%): € 80.67- Baader UFC FLI Camera-Adapter
- telescope-sided with mounting plate for UFC-Base (screws included)
- camera-sided with Flange to connect FLI-ML and FLI-PL cameras
- with mounting plate for UFC-Base
- can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and allows camera-sided adaptation of FLI-cameras
-
From: € 94.00 Price excl. German VAT tax (19%): € 78.99
- Baader CMOS RGB-R (595 – 690 nm) Bandpass Filter, suitable from f/15 to f/1.8
- Anti-reflection RGB filter (red/green/blue) with extremely high transmission of the respective color channel, thus simultaneously reducing stray light and reflections to an unprecedented level
- Balanced RGB design allows subframes to be taken with the same exposure time – extremely important for automated imaging tasks
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
-
# 2451011
€ 35.00 Price excl. German VAT tax (19%): € 29.41- three steel tips made of hardened steel
- suitable for the Baader T-Pod aluminium tripod
- suitable for stable hold of the tripod on soft ground
-
# 2958552
€ 36.00 Price excl. German VAT tax (19%): € 30.25- Changer / Inverter Ring S52/M48 for T-Rings / Adapters with S52 dovetail
- Can be used to combine T-Rings with S52 dovetail with accessories with M48 thread (2" filter-thread) or further down to T-2 (with M48 / T-2 Ring #2958553)
- changes the S52 dovetail of a adapter into a M48 inner thread
- This inverter ring is also part of our Sony E/NEX T-Ring #2408317 and of the Protective Canon DSLR T-Ring #2958550
-
From: € 43.00 Price excl. German VAT tax (19%): € 36.13
- Baader Premium grade impermeable RGB-C Clearglass Filters.
- The Baader clear glass filters are used to focus a camera when using very narrow band line filters (due to same mechanical thickness).
- Alternative function: e.g. our Protective Canon EOS T-Ring uses a clear glass filter for dust protection
- NO halos, NO reflections, NO ghosting
- non-ageing sealed coating edges
Please note: We have not planned to produce also a CMOS-optimized version of this clear filter because there is no necessity to do so. Our 7-layer BBAR(BroadBandAntiReflection) -coatings on both sides of the glass-substrate cannot be essentially improved.
Learn More -
# 2452280
€ 265.00 Price excl. German VAT tax (19%): € 222.69- Transport case with pre-punched compartment for Baader APO 95
- Robust case made of ABS hard plastic
- With compartments for various accessories
-
# 2454655
€ 16.00 Price excl. German VAT tax (19%): € 13.45- Rubber eyecup with M43 metal thread
- Holds absolutely tight on our Morpheus eyepieces due to the screw-on thread
- Material: silicone rubber - no aging, no plasticizer, no embrittlement
- Included since January 2018 with all Morpheus eyepieces.
- With the optional M43 extension # 2954250 (also included with the Morpheus eyepieces since January 2018), the eyerest can be increased by 7.5mm
- Fits also all other Baader eyepieces with M43 photo / video thread (Hyperion fixed focal length, Hyperion Zoom, Hyperion Aspheric)
-
# 2958500B
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Very short adapter, changes from 2" SC / HD male thread to T-2 male thread
- Ultrashort Adapter for all Schmidt-Cassegrain / EdgeHD telescopes
- SC-T Ultrashort Adapter, T-2 outer (male) thread / 2" SC inner (female) thread, pitch: 24/inch
- Only 9mm optical path length (8mm with the Delrin-ring removed)
-
From: € 4.50 Price excl. German VAT tax (19%): € 3.78
- Safe solar observation! 100% UV-protection, 100% IR-protection, sun light intensity reduced by 99,999%
- Our Solar Viewer AstroSolar® Silver/Gold – MADE IN GERMANY – safely protect your eyes for visual solar observation. This is THE solution to see the partial phase of Solar Eclipses or even big sunspots with your own eyes!
- Consists of Baader AstroSolar® Silver/Gold Film, with eye-sided reflex-free viewing. Also blocks IR, thus no unpleasant feeling of warmth in the eyeball. Optical Density OD=5,0
- CE / ISO certified: conforms to and meets the transmission requirements for eye safety: EN ISO 12312-2:2015 – Instructions in four languages (English, German, French, Spanish) on the inner side of the solar viewer
- Available in sets of 1pc, 10pc, 25pc, 100pc with counter display, alternatively also available as Bundle: AstroSolar Safety Film and Solar Viewers (various versions available)
-
# 2454636
€ 205.00 Price excl. German VAT tax (19%): € 172.27- Fixed focal length of 36mm Hyperion Aspheric 2" Eyepiece, 72° extreme widefield for large field of view
- High quality Phantom Group Coating for maximum contrast
- DSLR camera adaptable as projection eyepiece, with system thread SP 54
-
# 2458237
€ 46.00 Price excl. German VAT tax (19%): € 38.66- Adapter with M68i x1 to M74i x1 female threads, to adapt M68 parts to focusers with M74 x 1 male thread, e.g. Skywatcher Esprit 120&150, TS-Optics and Omegon APOs 150/1000 with Linearpower focuser
- Changes a M68x1 (Zeiss) male thread into a M74 x 1 female thread
- Part is used in our M74i x 1 ClickLock clamp #2956274
- Optical height: 12,7 mm, Inner diameter (clear aperture): 67 mm
-
# 2458655
€ 0.00 Price excl. German VAT tax (19%): € 0.00- MIBAS is a virtual machine built on the Linux distribution Fedora with installed and ready to use IRAF (Image Reduction and Analysis Facility) and ESO MIDAS (Munich Image Data Analysis System) installations. IRAF and MIDAS comprise a plethora of established tools for image analysis in the field of astronomy.
- Dedicated software for automated wavelength calibration and data reduction pipelines for the BACHES Spectrograph.
- IRAF and MIDAS, preconfigured and ready to go.
- Includes ESO SciSoft astronomical software collection.
- Write publication grade science reports with includededitor and templates.
- Cross-platform.
-
# 2957311
€ 14.00 Price excl. German VAT tax (19%): € 11.76- Front Jump Cover for SkySurfer V with 0.7 mm sun-seeker bore hole
- Diameter when opened: 42 mm
- Plug-on length: 15 mm
- Included in the scope of delivery of the SkySurfer V #2957315, is suitable for upgrading for an older SkySurfer V model