- Home /
- Accessories /
- Telescope Accessories /
- Focusers /
- Baader Planetarium
Shop By
- Price671
-
6665
- Stock Level28
-
- (23)
- (1)
- (4)
- Type of Adapter13
-
- (6)
- (7)
- Focuser size3
-
- (3)
- Focuser style3
-
- (3)
- compatible telescopes3
-
- (1)
- (1)
- (1)
- Optical tube length (mm)14
-
- (14)
- Connections (eyepiece-/camera-sided)18
-
- (1)
- (1)
- (1)
- (3)
- (1)
- (11)
- Connections (lens sided)21
-
- (1)
- (3)
- (2)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
See moreSee less - Manufacturer28
-
- (28)
- Adapters Family5
-
- (1)
- (2)
- (2)
Print Catalog
Baader Planetarium
-
Diamond Steeltrack® S58 to M48 BDS-Adapter
# 2957204
€ 29.00 Price excl. German VAT tax (19%): € 24.37Diamond Steeltrack® S58 to M68a BDS-Adapter
Diamond Steeltrack® S58 to M68i BDS-Adapter
Steeldrive II motor focuser with Controller
# 2957165
€ 665.00 Price excl. German VAT tax (19%): € 558.82-
Passt!Hallo. über Beiträge in einem Astro-Forum war ich vorgewarnt, daher habe ich den Steeltrack nach Umbau auf M48 nur sehr vorsichtig reingedreht ... und tatsächlich, die 6 Madenschrauben stießen an als der OAZ noch ca. 4mm draußen war. Und das obwohl ich die 6 Mini-Schräubchen schon recht fest angezogen hatte. Also wieder ausgebaut, die Kerben im Alu-Schwalbenschwanz waren winzig im Vergleich zu den Kerben des originalen 2" Adapters. Also nochmal eingebaut und nach meinem Gefühl die winzigen Schräubchen viiiiel zu fest angezogen. Aber jetzt passt alles perfekt, da wackelt nie wieder was. Aber das soll wohl so sein, die Stahl Madenschrauben müssen richtig fest ins Alu des S58 Schwalbenschwanzes reingedreht werden. Könnte auch in der Doku des Adapters bzw. des Steeltrack etwas beschrieben werden, aber ich hatte mich vorab informiert und bin jetzt mit dem Adapter und dem Baader Steeltrack OAZ an meinem Skywatcher Skymax 180 sehr zufrieden! Viele Grüße ChrisChris
-
tolles Zubehör mit angemessenem PreisIch benutze diesen Auszug an zwei verschiedenen SCT verschiedener Hersteller. Sauber verarbeitet und edel aussehend..Das Teil ist nicht billig, aber durchaus preiswert. Es gibt sehr viele Justiermöglichkeiten. Ich wünsche mir dennoch zwei Änderungen: - Das einbegriffene Zubehör sollte modular austauschbar sein - so brauchen nicht alle das Werkzeug, weil schon vorhanden, und andere wünschen den Click-Anschluss anstelle der Okular-Fixierung mit den drei Schrauben. So muss man den Click nachkaufen und hat dann einiges in einer Tüte auf dem Dachboden, wie Werkzeug, kleinen SC-Geweinde Adapter und die Klemme mit den drei Schrauben. - Die Blidschrauben passen nicht zu dem vermutlich meist verkauften Fokussiermotor des bekannten roten Herstellers aus China. So muss man etwas basteln und das sehr wertvoll und edel aussehende Design des Auszugs leidet etwas durch die gebastelte Blechschiene. Ich würde den Auszug wieder kaufen.Tom Halsingland
-
Steeltrack SCI bought the Baader 2” diamond steeltrack dual speed focused to augment focusing on my 10inch Meade LX200gps SCT. I couldn’t be happier. Easy to mount, easy to adjust, very tight and rigid assembly, no backlash, smooth operation, positive feel when making adjustments. I removed the 2inch adaptor plate and attached it with the 3.3inch thread as the Meade thread is 3.25inch it fits just about perfect tightens up great. My scope is fork mounted when pointed to the zenith i have 20mm clearance with the Meade 2inch Diagonal attached to the focuser. Highly recommended.SkldVenom
-
Baader Steeltrack Auszug (alte Ausführung)Ich schreibe hier von den älteren Baader Steeltrack Auszügen, die ja durch die Baader Diamond Steeltrack nochmals verbessert wurden. Vor ein paar Jahren habe ich mir eine gebrauchte AstroPhysics Montierung gekauft. Sozusagen als „Beifang“ war ein 80mm ED Refraktor dabei. Der Tubus war durch einen Umbau (viel) zu kurz geraten und der Okularauszug war sehr einfach ausgeführt und hatte große mechanische Toleranzen. Selbst mit einem 2“ Zenitspiegel kam man nicht in den Fokus. So lag der Refraktor längere Zeit im Regal, bis ich ihn mal auf meiner optischen Bank einem Test unterzog. Die Ergebnisse waren so gut, dass ich mich sofort an die Konstruktion für einen neuen Refraktor machte. Als Okularauszug kam nur der Bader 2“ Steeltrack in Frage, da ich 1. Mit dem 3“ Steeltrack schon sehr zufrieden war 2. Der Okularauszug optimal zu einem Alu-Tubus passte und 3. Konnte ich auch noch den Motorfokus von meinem 3“ Steeltrack verwenden. In der Hauptsache fotografiere ich Sonne, Mond und Planeten. Gerade bei der Aufnahme von Planeten mit hoher Vergrößerung ist es sehr ärgerlich, wenn der Planet beim Fokussieren "hüpft". Das kommt durch die unvermeidbaren, mechanischen Toleranzen. Wie schön, dass das ist bei den Baader Steeltrack Auszügen nicht der Fall ist. Leider... passte der FCC und das 4-fach Telezentrische System nicht in den (alten) Steeltrack. Mit einem Adapter müsste ich den Steeltrack zu weit nach außen fahren, was zu einer hohen Belastung der Kugellager geführt hätte. Also Neukonstruktion? Ich entschloss mich zu einer Änderung des Auszugrohres, zumal ich als gelernter Feinmechaniker die Fähigkeiten und die Werkstatt dazu hatte. Die neuen Diamond Steeltrack Auszüge haben ja nun Gott sei Dank die Möglichkeit, den 2" Anschuss vielseitig zu verwenden. Als gelernter Feinmechaniker begeistert mich immer die hochwertige Ausführung der Baader Steeltack Auszüge.Bernd Höfner
-
Diamond stelltrackDer stelltrack ist absolut hochwertig und präzise gearbeitet und verbesert den Umgang mit meinem Teleskop durch seine absolut steife und präzise Gängigkeit deutlich. Die Montage fand ich an meinem 8"-Celestron-Newton anspruchsvoll und es viel mir nicht leicht, vier neue Löcher in den Tubus zu bohren. Wichtig: Bei mir waren es 6 mm Bohrungen für die VersaBase-Schrauben (nicht 5 mm wie im Erklärvideo angegeben!). Und diese müssen wirklich nach temporärer Fixierung der Paltte über die "alten" Löcher sehr präzise und wirklich zur Tubusmitte hin ausgerichtet sein. Ärgerleich fand ich den beigelegten Sechskantschlüssel für die Madenschrauben der VersaBase: Er war zu klein (hat die Madenschrauben nicht gegriffen!) und ist für die on-Tubus-Montage eigentlich zu kurz. Ich habe mir dann einen Orginal-Imbus 1,5 mm gekauft (ca. 2,40 €) der sehr gut paßt (der hätte bei einen Prudukt für 305 € dabei sein sollen)AstroML
-
Baader diamond steel track OkularauszugWie gewohnt bei Baader hochwertige fertigung, einfach zu montieren. Es ist angenehm zu wissen, dass man für sehr hohe ansprüche noch weitere schritte bezüglich justiergenauigkeit durchführen könnte, welche aber im "normalfall" nicht nötig sind.sagittarius
-
Praktische Erweiterung des Steeldrive ControllerSuper Erweiterung, um am Steeldrive Controller noch eine zusätzliche Cinch-Buchse für die Stromversorgung von weiterem Zubehör zu haben. Die Leistung kann über die Software leicht gesteuert werden und liegt standardmäßig bei 5W. Der größte Minuspunkt ist eigentlich nur, dass der Controller nicht standardmäßig über eine Cinchverbindung verfügt oder wenigstens dieses Zubehör nicht von vorneherein beim Controller dabei ist.Dirk
-
Tolles ProduktSuper Produkt. Ich hatte zuerst Angst die Löcher in meinem C8N zu bohren, aber die Schablone macht es richtig einfach. Fokussieren lässt sich super damit. Cheers. FaresFares
-
Montage Baader SteeltrackMit dem Kauf des Baader Steeltrack habe ich mir mehr Stabilität vor allem in der Fixierung meiner Canon EOS 6D Vollformatkamera am Okularauszug meines Newton erwartet und wurde auch nicht enttäuscht. Vor allem auch in Kombination mit dem 2" ClickLock erhält man eine stabile Lösung die wirklich fest hält. Die Montage des Steeltrack am Newton ist allerdings nichts für "schwache" Nerven. Die Bohrungen sind zwar rasch gesetzt, aber die Fixierung der Versabase war nicht ganz einfach. In meinem Fall ist der Durchmesser des Tubus gerade an der Grenze der Montagemöglichkeiten. Die beiliegenden Abstandstreifen bieten zwar eine gute Auflage, die Schrauben aber dann von innen durch die Bohrungen in die V2A-Druckstücke einzuschrauben bedurfte einiger "Fingerverrenkungen". Schlussendlich hat es aber geklappt. Am nächsten Tag gab es dann auch das first light für den Steeltrack und alles funktionierte ganz tadellos. Wie gesagt auch das ClickLock System ist einfach super, früher musste ich ein paar mal die Klemmschrauben weiter lösen um endlich den 2" Einschub mit der Kamera und allen Zusätzen einfädeln zu können. Jetzt einfach einsetzen und festklemmen - passt. Also daher für das ganze System eine 5-Stern Bewertung.Harald
-
Works as designedWorks as designed. No issues so far. You only have to be a little bit careful with the fragile pins. Esp. when plugging in in the dark, but since it is a multipurpose port, multiple pins are required. Only total power supplied for the dew heater was a little bit low in the first controller hardware version, but it has been increased with latest version. Issue fixed :)Ruediger
-
Usefull to attach to OTAVery useful to attach to OTA directly to get current tube temperature. In combination of the round one for ambient air temp a perfect team. I have 3D printed some tube rings with matching spaces to attach the temp sensors to the scope, which makes temp reading more precise and repeatable.Ruediger
-
Very usefulI am using three holders for three controllers and I love them. Extremely useful if you operate the scope remotely, since you can fix the controller to the scope and optimize the wiring without the danger that lose and swinging cables impact accuracy or tangle. A must have for remote scopes.Rüdiger
-
Rock solid, reliable and very preciseI am using 3 controller and motor units now for more than a year on three scopes: Meade LX 200 with a SteelTrack focuser, TEC 140 ED with Feathertouch and an TS 80/460. Controller: It is crafted from a solid aluminum block and is very stable. The keypad is easy to find in the dark thanks to the dimmable keypad, but also in a tactile way. You can feel the buttons with your fingertips. One big advantage is that the controller does not lose position when it gets unplugged (power or USB). In combination with the brackets the controller perfectly fits on the scope. Wiring can be made easily. The usage is intuitively and even visitors who have never operated such a device come to terms with it in seconds. The power supply is standard 12V DC which makes it easy to integrate it into existing solutions. There are no special requirements. Motor unit: Also very solid and extremely precise. Only one minor potential improvement is the noise when moving, but this is complaining on highest level. Very positive is that you can use any CAT6 network patch cable to connect controller and motor unit. No special/unique cables are required and you can get the optimal length in any shop. The concept of belt drive is a big advantage over other geared solutions. The belt drive has no backlash. So you only have to handlethe potential backlash of the focuser. Software: The software is very stable now. Besides storing focuser’s positions it displays the temperatures and assists you very easily to set up temperature compensation. One big benefit: You can start multiple instances on the same computer to control more devices. Firmware: The Firmware can be updated with a few clicks via USB. So it is well prepared for future enhancements. Conclusion: Though it is definitely not a cheap solution, it is simply working and reliable. For my point of view worth every cent. The support is excellent. Its capability to be attached to almost all focusers, makes it versatile and an option not only for SteelTracks. Clear Skies RuedigerRuediger
-
Exzellente FeinjustageIch benutze den Metall-Magnetring für Homing Sensor an meinem 2" BDS-SC Baader Diamond Steeltrack® Okularauszug. Er funktioniert wunderbar, sodass ich jetzt an meinem Celestron 11" Edge HD die Ebene, bei der Fokalfotografien von Deepsky Objekten besonders schön werden, reproduzierbar einstellen kann!Alexander
-
Fitting a 2-inch BDS-RT Baader Diamond Steeltrack Focuser to a Teleskop-Service GSO 8-inch Ritchey-ChretienFitting a 2-inch BDS-RT Baader Diamond Steeltrack Focuser to a Teleskop-Service GSO 8-inch Ritchey-Chretien Background The TS 8-inch RC has M90x1mm connections at the focuser end of the scope. My setup has a TS 50mm extension adapter with for 6- & 8-inch RC connected to the scope (TS part no: GSRCV50), to accommodate the long back-focus. Attached to this is a TS M90 tilting adapter flange (TS part no: GSRCJ90). This is an aid to collimation and allows the long axis of the focuser to be aligned with the optical axis of the scope. I then have a standard TS monorail focuser for the RC, again with an M90x1 connection. Image 1 shows the 50mm extension and tilting flange, with the old focuser removed. Note the M90 male thread at the end of the flange, to which the focuser connects. Fitting the Baader Diamond Steeltrack RT It is assumed that the reader has access to the Steeltrack manual and has purchased the necessary RT-Adapter M90x1 Diamond Steeltrack (Baader part number 2957283). 1. The Steeltrack RT is supplied with an M68 adapter as standard. Remove this by loosening the M5 screws around its outer edge. An M88 dovetail is exposed. See Image 2. 2. Connect the new RT-adapter to the Steeltrack, tightening the M5 screws sufficiently to hold it in place, but still just rotates. Note that the thumbscrew from the M68 adapter can be transferred. See Image 3. 3. Connect the Steeltrack to the tilting flange, rotate the focuser to the desired orientation, then tighten the thumbscrew to lock it in place. If desired, the M5 screws around the edge of the M90 adapter can be tightened for a firmer grip. See Image 4. After fitting the Steeltrack, I can confirm that the focuser has the full 80mm inward travel. This above method should still be applicable, even if a tilting flange is not present, as M90x1mm connections are standard on this size of RC. However, with only the 50mm extension in place, it may be that the focuser will not move the final 5mm of inward travel, depending upon the size of any baffle at the junction of the extension and the scope. Note that an alternative method is not to transfer the thumbscrew from the M68 to M90 adapters, but to use the all the standard screws.Graham
Most Recent Product Questions-
Rated: 0
What is the actual thickness of the 50.4 mm diameter filter frame?Is Answered? Yes (1 answer)
Answer rated: 0Filter thickness incl. sealed coating edges 3,2mm.Answer by: Baader Web Team (Admin) on May 23, 2024 9:06:00 AMRated: 0
Can this adapter be attached to the S58 ring on a 2” diagonal? I want to have an M68 thread on a 2” diagonal, but still have the 2” SCT internal thread available for attaching correctors and filters.Is Answered? Yes (1 answer)
Answer rated: 1Please use the following Baader M55a/M68a Adapter (productno.: 2956110) to equip the 2" diagonal with an M68 adapter.Answer by: Baader Web Team (Admin) on May 21, 2024 7:55:00 AMRated: 0
Is the 120mm filter's opening big enough to fit on Sky-Watcher MAK 127's opening without obscuring some of the opening?Is Answered? Yes (1 answer)
Answer rated: -1This filter size fits perfectly. If you want to be absolutely sure, you can use our online filter calculator. https://astrosolar.com/baader-solar-filter/index.php?lang=en&force_lang=1Answer by: Baader Web Team (Admin) on May 21, 2024 8:01:00 AMRated: -1
Is there a diagram available showing dimensions of the sidewing and positions of holes?Is Answered? Yes (1 answer)
Answer rated: 0We have added a simple technical drawing of the sidewing, including the dimensions, hole drillings and spaces, to the product images on the product page.Answer by: Baader Web Team (Admin) on May 21, 2024 10:40:00 AMRated: 0
What are the dimensions of this plate?Is Answered? Yes (1 answer)
Answer rated: 0The dimensions of the plate are 180 x 180 x 20mm. We have added a simple technical drawing of the plate, including the hole drillings and spaces, to the product images on the product page.
Check out also the application image of these plates in action.Answer by: Baader Web Team (Admin) on May 21, 2024 10:36:00 AMBaader Planetarium GmbHOur company exists now for more than 50 years. In this time, more than 15.000 Baader Planetariums (the first patented product of our company) help all over the world to give students an understanding of astronomical correlations. In our own manufactory, more than 500 observatory domes have been produced and delivered turnkey-ready. Instruments and telescope accessories from "Baader" are known for their high qualities by many astronomers and universities. We consider it our duty and obligation, not only to sell telescopes, but an indivdually selected telescope system, that brings you a lifetime of joy.