Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451116
€ 122.00 Price excl. German VAT tax (19%): € 102.52- suitable for Celestron CGEM-DX- and CGE-Pro mounts
- Suitable for the and Baader Hardwood Tripods
- Attention: for Adaptation on Baader Short Pillar III w/o Flange Adapter (#2451150 , € 260,-) the Universal Base-Ring for Baader Short-Steel-Pillar III (#2451155 , € 61,-) is needed.
-
# 2454835
€ 31.00 Price excl. German VAT tax (19%): € 26.05- converts any 2" (SC) female thread into a M44 x 1 female thread - without extending the optical length
- manufactured to adapt our Hyperion Universal Zoom Mark IV onto most spotting scopes (see animation on the right)
- Note: for fitting the optical nose of the Zoom into the receptor at some spotting scopes, the thin dust cover ring needs to be removed - see images
- suitable for adaptation to Leica spotting scope with male M44 x 1 connection thread. Also suitable for all M44x1 threads according to the old Zeiss (Jena) standard.
- Adapter with continuous 2" male and M44 x 1 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )
-
# 1508030
€ 33.00 Price excl. German VAT tax (19%): € 27.73- Filter holder with T-2 threads on both sides and 1¼" M28.5 internal filter thread.
- Used for attaching 1¼" filters before Baader binoculars
- A 1¼" filter can be attached from either side and will sit within this adaptor
-
# 2957220
€ 365.00 Price excl. German VAT tax (19%): € 306.72- Baader Diamond Steeltrack® (BDS-SC) for Schmidt-Cassegrains (EdgeHD) with 30 mm focus travel
- Minimum height (as supplied – incl. 2" clamp): 93 mm
- Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 82 mm
- Minimum height (with optional S58 ClickLock clamp): 112 mm
- Focuser weight (as supplied – incl. 2" Klemme): 1.040 g (36.7 oz)
- Includes 2" and 3.3" adapter to fit all C14/C11/C9¼/C8/C6/ OTA’s
-
# 2454602
€ 635.00 Price excl. German VAT tax (19%): € 533.61- Eyepiece set with four Hyperion focal lengths (5, 10, 17, 24 mm), incl. Eyepiece case
- Huge 68 degree wide angle field, tailored to the maximum Visual angle of the human eye
- Phantom group coatings in Zeiss class for complete freedom of reflections and maximum image contrast
- Modular design of the eyepiece body allows modification of the eyepiece focal length with optional finetuning rings
- Camera ready! Almost all DSLR camera bodies can be connected but also simpler fixed lens cameras directly to the Hyperion eyepieces
-
# 2458271
€ 36.00 Price excl. German VAT tax (19%): € 30.25- T-2 (M42x0.75) Locking ring with lever for direct attachment of the MaxBright® II onto all Baader T-2 star diagonals, be it prisms or mirrors (e.g. to directly couple the body of the Maxbright II with the Baader Prism Diagonal T-2/90° 32mm (#2456005 , € 110,-)
- An Bino auxillary-ring for adaptation of MaxBright® II (#2458272 , € 10,-) is additionally required for adaptation of the MaxBright® II. The Bino auxillary-ring is placed between the binocular and the T-2 locking ring.
- If the lever of the locking ring comes to rest in an unfavourable position you can still adjust the position of the lever. The lever is only threaded into the ring at the outer circumference. This lever may be threaded into any of the three M4 threads each spaced 120° apart.
-
# 2408166
€ 27.00 Price excl. German VAT tax (19%): € 22.69- Allows mounting of Baader 2" filters
- Needs Hyperion DT-rings #2958028 - 2458062 and additional Stepper Rings M67 up to M82
- All Baader 2" filters in version M48 thread can be customised with specific extension tubes on almost all DSRL lenses.
-
# 2957282
€ 43.00 Price excl. German VAT tax (19%): € 36.13- to connect Refractors with 97mm inner diameter
- fitting for many Synta and Celestron tubes
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
-
# 2456120
€ 670.00 Price excl. German VAT tax (19%): € 563.03- 2" ClickLock-Clamp and 2" nosepiece.
- Suited for astronomical observation at high magnification
- Hard-silver-coated and protected against aging. Astro quality, manufactured acc. to Zeiss standard
-
# 2459137
€ 39.00 Price excl. German VAT tax (19%): € 32.77- Baader UFC S70 / M57 (m) Thread-Adapter
- telescope-sided M57 outer thread – for adaptation to Borg telescopes with M57x0.75 thread
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) as well as to UFC extensions
-
# 2454652
€ 10.00 Price excl. German VAT tax (19%): € 8.40- Classic eyecup with foldable lens hood
- Standard form (for barrel diameter ~32mm with 1mm clear cut)
-
# 1501605
€ 78.00 Price excl. German VAT tax (19%): € 65.55- Length: 250mm (10")
- Black anodized, without holes.
- Weight: 520g
-
# 2458200
€ 730.00 Price excl. German VAT tax (19%): € 613.45- Apochromatic, multi-coated fluorite lens system
- 10-times higher line resolution than the world best projection eyepieces
- The FFC fits on every T-2 thread and in every 2" focuser
-
# 2459095
€ 137.00 Price excl. German VAT tax (19%): € 115.13- Set consisting of four pieces 3D-printed filter holder for unmounted 2" (Ø 47,4 mm) Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- We offer selected 2" filters especially for the FCCT in an unmounted variant, but basically all Baader 2" filters work when removed from the filter cell
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- 2" filter holder also available as single item: 2" (Ø 47,4 mm) filter holder for Baader FCCT (3D-printed) (#2459085 , € 40,-)
-
# 2458120
€ 20.00 Price excl. German VAT tax (19%): € 16.81- Eyepiece 1¼ "/ T-2 internal thread priced version with M 4 screw
- 1 M4 clamp screw
- Telescope side with T-2 internal thread
- For 1¼" eyepieces or connecters
-
# 2451575
€ 32.00 Price excl. German VAT tax (19%): € 26.89- For holding Guidescope Rings or V-Clamp
-
# 2459256
€ 387.00 Price excl. German VAT tax (19%): € 325.21- Telecentric with 2" outer diameter and T-2 threads on both sides
- Aplanatic, with 4x focal length extension to achieve a parallel f/30 beam in conjunction with ~f/7,5 optics systems – free of field curvtare
- Primarily calculated and produced for H-alpha at 656,3 nm, delivering maximum Strehl (definition brightness)
-
# 2000301
€ 376.00 Price excl. German VAT tax (19%): € 315.97- hand-painted globe with graduation and moon on a chrome ring with a gear box.
- The gear regulates the following four functions
- The earth rotating around its own axis (rotation)
- Earth's axis pointing towards the celestial poles
- The motion ofthe moon around the earth
- The shifting ofthe lunar nodes. It causes that the position of the chromed ring in which the moon runs - the imaginary position of the moon's orbit to the earth changes according to the conditions in nature
- Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
-
# 2458240
€ 80.00 Price excl. German VAT tax (19%): € 67.23- To fit #2458196 Ultrashort 2" clamp onto Pentax OTA
- Pentax Adapter M84 / M68
- Telescope side with Carl Zeiss M68 Pentax thread on ocular
-
# 2451314
€ 249.00 Price excl. German VAT tax (19%): € 209.24- Telescope adapter for telescopes with Starlight Instruments FeatherTouch 3.5" focuser to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
- Developed and manufactured in Germany
- Connection on camera side: 120 x 7.5 mm dovetail
- Black anodized
- Optical length: -2.5 mm
- Inner and outer diameter: D120a/ D92i