Baader Planetarium

• A Solar Shade made from Aluminium to clamp between any T-2 connection
• T-2 drilling (ø 42 mm)
• Use as shade (glare protection) for visual observation / imaging through eyepiece or camera
• Used to shade the eyepiece or camera viewing opening from direct solar radiation during photographic- or visual solar observation in the H-alpha region with narrowband filters from SolarSpectrum

• 1¼" filter holder, to use smaller filters or other parts (barlow lenses, reducers) with 1¼" filter thread in the path of light
• Consists of:
•   Baader T-2 Conversion Ring (#2958110, € 29,-)
•   Baader Double T-Filterholder 1¼" (#1508030, € 33,-)
•   T-2 Fine-Adjustment ring 1mm (gold) - Aluminium (#2457913, € 6,50)
•   Baader Expanding Ring T-2f / M48m (T-2 part #29) (#2458110, € 22,-)

• M68 (Zeiss) back end plate to fit TEC 110 FL focuser
• Provides an M68 female thread to fit the shortest version of 2" ClickLock clamp or FFC/M68 Adapter-System

• Baader H-alpha Narrowband Filter – Precision Grade
• 6.5 nm FWHM, recommended for optical systems from > f/3.4
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

We explicitly warn against observing the sun with a DeepSky 6.5 nm (equivalent to 65 Ångstroem) H-alpha narrowband filter, specialized solar chromosphere and prominence filters from SolarSpectrum start at 0.8 Ångstroem. Photographic experiments with a camera are theoretically possible, but by no means observe the sun with naked eyes – you endanger your eyesight!

• 2" BBHS star diagonal with 2" ClickLock terminal and black case. Provides greatest reflectance over most spectral range from 390 to 2000nm
• Including Baader 2" Safety Kerf nosepiece with 2" filter thread (#2408156 , € 43,-) with additional grip and security from inadvertent slipping.
• Much higher in brilliance than standard dielectric coatings
• BBHS = Broadband Hardsilver coating with dielectric protective overcoating
• T-2 BBHS-Sitall zenith mirrors on both sides with T-2 Photo thread

• single or double flap system for refractor or mirror telescope systems to protect against dust and dirt
• prevents night dedicated telescopes with CCD Sensors on bigger telescope systems with many instruments for day and night observation from receiving sunlight while sun observation is in process
• every Baader TFS comes with the TFS controller. This controller includes a web interface which makes it easy for the customer to open and close the flaps from the existing PC web browser.
• OTA covers available for CDK 17", 20", 24" - see below Dropdown

• To connect Tak adapter M72 / M68 to Takahashi Mewlon reflectors
• This Mewlon Adapter, in combination with TAK Adapter M72 and the 2" Ultrashort eyepiece clamp (# 245 8196) results in an extremely short 2" eyepiece clamp for every Takahashi-Reflector (33mm optical path length in total).

• Baader Wide-T-Ring Nikon Z to connect Nikon Z cameras on the Astro T-2 system and the S52 dovetail
• All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
• The illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
• On the camera side: Nikon Z bayonet
• Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch

• Baader Stainless steel 3/8″ to 1/4″ Photothread-Reducer
• made of V2A stainless steel
• This photothread-reducer of stainless steel serves to change – for example – the small photothread of your tripod-adapterplate into a large 3/8" thread.

• 2" wedge prism according to Herschel - one-sided Phantom Group^® anti-reflective coating, with ceramic solar finder and 2" ClickLock^® eyepiece holder
• Integrated rotation mechanism for polarising filters – the best method for brightness adjustment in visual solar observation and solar photography in white light
  
• Stepless brightness adjustment is made possible in combination with the optional Baader Single Polarizing Filter 2" (#2408342 , € 72,-) and the included Neutral Density Filter. The polarizing filters are not included in the scope of delivery
  
• Including our Baader 7.5 nm Solar Continuum Filter 2" (540nm) (#2961581 , € 198,-) for an uncompromisingly sharp solar image and the Baader 2" Filter Crown Tool (#2458135 , € 35,-) , to make it easier to replace the installed filters.
• S58 dovetail and Safety Kerfs on the 2" nose-piece, New 3-point adjustment system preset in the factory
• Available in visual and photographic versions, please choose from dropdown

• T-2 Photo Adapter with 2" female thread
• Incl. 1¼" Filter holder
• NX4 (C90) / ETX (and SC!) Universal Photo Adapter
• Combination of the parts Baader 2" NX4 (C90) / ETX Expanding Ring (#2958500A , € 33,-) and Baader SC / HD Ultra Short T-Adaptor, 9mm optical length (#2958500B , € 51,-)

• BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
• Overall height: 100 mm
• The Steel Pillar Flange for GM 4000 Mount (#1454090 , € 290,-) is required

• RCU (Remote Calibration Unit) for Baches, included 3M fibre optic cable
• Allows wavelenght calibration of the complex BACHES Echelle-Spectrum
• Choose between manual or remote control
• With Thorim-Argon and Halogen lamp with fibre connection

Interactive Website with Calibration examples.

• is set up on a pillar or leveling flange

• Baader UFC S70 / C8 Hyperstar, SC, HD Adapter
• telescope-sided C8 Hyperstar, SC and EdgeHD Adapter
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
• Please note the below description on Hyperstar Adaptation

• Hook and loop cable ties with Baader Planetarium logo
• Reusable and closable cable ties for bundling any kind of objects
• 20 mm x 150 mm
• Scope of delivery: 10 x Baader cable ties

• High-quality lense system with apochromatic features, for magnifications from 2x
• Modular design for visual and photographic (VIP) use
• suitable for 1¼" and 2" focusers

• Baader UFC M54x0,75 (m) Thread Adapter
• telescope-sided with mounting plate for UFC-Base (screws included)
• camera-sided with M54 male thread
• can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and allows camera-sided adaptation of adapters/cameras with M54 female threads

• Temperature Control Upgrade for already purchased BACHES Echelle spectrograph. Additionally, the Baches Temperature Control Set incl. EPS Thermo-Cover and Steeldrive Controller (#2458665 , € 1890,-) must be purchased.
• Upgrade includes labor time for retrofit only. Labor time includes: Disassembly of the Baches, and modification of the housing parts to prepare for Baches Temperature Control Set incl. EPS Thermo-Cover and Steeldrive Controller (#2458665 , € 1890,-) . 
• For this we need the BACHES Echelle spectrograph. The Baches will be disassembled, modified, then reassembled and readjusted by us.
• The retrofit work is not necessary if you buy the  BACHES Echelle-Spectrograph (#2458600 , € 9485,-) and the Baches Temperature Control Set incl. EPS Thermo-Cover and Steeldrive Controller (#2458665 , € 1890,-) ex factory.