Baader Planetarium

• Available again for a limited time: Carl Zeiss 1¼" Abbe Barlow lens with T-2 thread made in Germany by Carl Zeiss in Jena – with 1¼" / T-2 ClickLock eyepiece clamp by Baader Planetarium
• visual Barlow lens and photographic eyepiece projection in one system
• Direct T-2 Adaption possible - extends magnification up to 3x - without loss of quality
• The image quality is only exceeded by our 3x-8x flat field FFC-Converter, in case the projection factor exceeds 3x

• Improved version of former MX-Mount
• Artistry, vision and all the performance of a professional grade mount
• Designed to make observatory quality astronomy – field portable
• Control system of 4th generation, featuring USB 2.0 computer to mount interface

• Adapter set to connect the Steeldrive II Motor Unit (#2957265 , € 275,-) to the FeatherTouch 3.5" focuser from Starlight Instruments
• Allows motorized fine drive of the FT 3.5" OAZ with the Baader Steeldrive II motor unit for heavy loads (up to 8 kg)
• Please note:: The motor unit requires the Steeldrive II Controller (#2957260 , € 445,-) . You always need one controller to operate one motor unit. But you can use one controller with several motor units one at a time – you only need to plug it into the motor unit which you want to use. The Steeldrive II Motor with Controller is also available as Set:  Steeldrive II motor focuser with Controller (#2957165 , € 665,-)

• Specially created for Hyperion ClickStop Zoom Mark III
• Result in a focal length range of 3,5 to 10,5 mm
• Modular Design: usable for many applications (visual and photographic)

• Baader IR-Pass Filer HWB 685nm
• Reduces the effect of seeing resulting in a much sharper image.
• Tip for use: Ideal for imaging and used for the luminosity channel.
• The effect of use: The normal spectral bandwidth is 400-700nm. This filter starts at 670nm in the deep red, just in the visual range so it can be focussed correctly. At this long-wavelength spectral range the atmospheric air turbulence (seeing) has much lower impact on the sharpness. Dark structures on Mars, Jupiter the Moon and the Sun are thereby rendered much sharper. The luminosity can then be combined with RGB creating a very sharp LRGB image.
• Highly recommended for any planetary imager.
• Reflex free anti-reflective and optically polished.

• To adapt DSLR T-Rings onto Clickstop-Zoom eyepiece
• The only ring with direct transition from the SP54 system thread to T-2a (M42x0.75)

• Baader O-III Narrowband Filter – Precision Grade
• 6.5 nm FWHM, recommended for optical systems from > f/3.4
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• for larger Celestron-Mounts
• Made for outdoor application, water resistant sealed housing. Usable in temperatures from -25°C up to 40°C
• input voltage 100-240V, Output 12.8V / 5A 60W
• Protective-disconnect ellbowed plug German design and quality with EU-wall plug

• Celestron Clean & Collimate (C&C) is only available in German language since this service can only be offered to customers that purchased their Celestron product from an authorized dealer in Germany. Please contact your local dealer - or Celestron.com for repair and service quotations

• Extension ring of 1 "C-mount female thread on T-2 external thread
• Allows very short connection

• Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis
• Mounts directly to the standard screw mount of all Planewave's common telescopes via the straight mounting block.
• Weights can be mounted in horizontal position at the rear of the OTA both "top" and "bottom". This makes it possible to balance the telescope in the vertical position as well.
• The Planewave Leveling-Set consists of
  • 1kg Leveling Weight Ø 75 x 30mm (#2951390 , € 101,-)
  • 2.5 kg leveling counterweight Ø 75x75mm, made of V2A stainless steel (#2951402 , € 143,-)
  • 150mm counterweight-shaft M14, Ø 16mm (#2451554 , € 80,-)
  • Mounting block for leveling counterweight bar M14 for PlaneWave Instruments CDKs (#2451549 , € 48,-)

Successor model for GM 4000:
Stabilized Poser-Supply for10Micron GM 2000 / GM 3000 and 4000

The new control of the mounts is again significantly revised and stabilized, which allows us to become more efficient on the power supply side as well.

The Baader OTP 600W is no longer produced and therefore replaced by the Stabilized Power-Supply for GM 2000 / GM 3000 and GM 4000 (#1452070 , € 230,-)

• Projection dome for the Baader Planetarium, sizes 2.5m and 3.5m diameter
• Geometrically correc half-globe, consiting of 8 segments of each 45° made of fiberglass reinforced polyester.
• Inner color matte white, outer color grey

• Baader UFC S70 / M48 (f) Adapter
• telescope-sided M48 inner thread
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to the
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height: 106 mm

NEW VERSION: Baader OMS-Nano – Remote Switch for 10Micron Mounts

The Remote Switch Module is not produced anymore. Therefore, we have redesigned the Remote Switch and manufactured it with a new look and name. The Remote Switch is now part of our OMS (Observatory Management System). 

More details about the Baader OMS-Nano – Remote Switch for 10Micron Mounts

• DADOS 1¼" Guiding Eyepiece, Kellner 10mm

• Baader UFC 2" Filter Slider / Filter Container M48
• suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
• Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side

• Hook and loop cable ties with Baader Planetarium logo
• Reusable and closable cable ties for bundling any kind of objects
• 20 mm x 150 mm
• Scope of delivery: 10 x Baader cable ties