Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2454650
€ 9.00 Price excl. German VAT tax (19%): € 7.56- Hyperion SP 54 thread protection ring
- Material: high quality silicone - non-aging, no chemical softeners, non smelling, not getting brittle over time
-
# 2957263
€ 21.00 Price excl. German VAT tax (19%): € 17.65- Temperature sensor to compensate the drift automatically, if there are large temperature differences
- Temperature sensor with phone connector and 1m cable, also supports control of dew-shield-heating
- Can be used with Steeldrive II motor units or Steeldrive II controller
- One sensor is included in the scope of delivery of the Steeldrive II motor focuser with Controller (#2957165)
-
# 2457555
€ 4.00 Price excl. German VAT tax (19%): € 3.36- Battery 3V Lithium for Celestron Star Pointer, Baader Sky Surfer III / V and Vario-Finder
-
# 2459098
€ 134.00 Price excl. German VAT tax (19%): € 112.61- Set consisting of four pieces 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- 36 mm filter holder also available as single item: 36 mm filter holder for Baader FCCT (3D-printed) (#2459088 , € 39,-)
-
# 2458105
€ 27.00 Price excl. German VAT tax (19%): € 22.69- 1¼" nosepiece with T-2 thread and M28.5 filterholder
- Barrel with 24mm Insertion and securing groove
- Focus side with T-2 external thread telescope side with 1¼ " outer diameter
- Also available as version with Safety-Kerfs and with extra-short T-2 thread (3mm):
Baader 1¼" T-2 nosepiece with Safety Kerfs (#2458106 , € 31,-)
-
# 2451565
€ 315.00 Price excl. German VAT tax (19%): € 264.71- Fits all 3"Losmandy- and (Vixen/Celestron/Skywatcher)EQ-style dovetail bars
- PAN 3 "/ EQ 370, dual prism clamp, suitable for all 3-inch (Losmandy style) and simultaneously for all (EQ-style) dovetail rails Celestron / Vixen / Skywatcher
- With three wide, two-terminal blocks made of brass. Clamping handles flush with the ground surface - therefore fixed everywhere.
- With Allen screw head in the clamp handle (can be tightened with an Allen wrench) having toothed counter surfaces to maximize the points of contact with any track. Prefabricated pre-drilled for a variety of mounts.
- Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)
-
# 2459247
€ 111.00 Price excl. German VAT tax (19%): € 93.28- Required to use the Steplessly variable diaphragm 13 - 113mm (#2459300 , € 366,-)
- Suitable for sizes 75, 90 and 110mm of the Frame for D-ERF Filters 75-180mm (various versions available)
- For optimum adjustment of a telescope aperture when observing with an H-alpha filter of Solar Spectrum (also suitable for other brands)
- Made of CNC-machined aluminum
-
# 2459171
€ 27.00 Price excl. German VAT tax (19%): € 22.69- Baader UFC S70 / M54 (f) Adapter
- Telescope-sided with M54 x 0,75 inner thread
- Camera-sided with S70 dovetail
- Can be adapted via the S70 dovetail to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) as well as to UFC extensions
- Allows the use of the UFC system instead of M54 filter wheels on many common cameras with M54 x 0.75 thread. For this the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and the camera-side M54 adapter Baader UFC M54x0,75 (m) Camera-Adapter (optical height: 2 mm) (#2459117 , € 32,-) are additionally required.
-
# 2458225
€ 101.00 Price excl. German VAT tax (19%): € 84.87- Centers FFC/Solar TZ-syst. within M68 spacer rings
- Outer Thread: M68 (Zeiss), 2.7 "(Astrophysics), M60 (Vixen), M56 female thread (China)
- Eyepiece Thread: T-2 (photo) male and female threads and M68 (Zeiss) female thread
-
# 2451312
€ 207.00 Price excl. German VAT tax (19%): € 173.95- Telescope adapter for Alluna Optics M100a (male thread) to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
- Designed and manufactured in Germany
- Connection on camera side: 120 x 7.5 mm dovetail
- Black anodized
- Optical length: 0.5 mm
- Inner and outer diameter: D120a/ D90i
-
# 2951420A
€ 354.00 Price excl. German VAT tax (19%): € 297.48- made of V2A stainless steel
- for axis diameter of 63.5 mm – made for Astro Physics El Capitan 3600
- 20kg
-
From: € 32.00 Price excl. German VAT tax (19%): € 26.89- Used to adjust the working distance of larger cameras and similar accessories with M54 thread
- Telescope side M54x0.75 female thread, 3.5 mm depth
- Eyepiece-/camera side M54x0.75 male thread, 3 mm length
- High-quality Aluminum, available in different lengths
-
# 2958027
€ 24.00 Price excl. German VAT tax (19%): € 20.17- With the stop collar bottoming of 1¼ "barrel with applications of fine tuning rings on the diagonal, or a prism is prevented
- With brass clamping ring and two clamping screws
-
# 1324000
€ 395.00 Price excl. German VAT tax (19%): € 331.93- Ring for dovetail for the Baader 3,5" Quick Changing Ring (#1324005 , € 275,-) to connect, rotate and change large cameras, spectrographs or visual accessories, as well as to the Securfit system rem and with adapters of the 2" and M68 system respectively.
- Suitable for Hedrick Focuser 3.5" for Planewave CDK 14 - 24"
- Creates a quick change and rotating device with standard load capacity when coupled with Baader 3,5" Quick Changing Ring (#1324005 , € 275,-)
- Quick release clamping for heavy accessories - with brass-clamping
-
# 2957005
€ 12.00 Price excl. German VAT tax (19%): € 10.08- Baader Astro-Box #1 (M31)
- foam-fitted matal container: 16,5x14,5x11cm
-
From: € 90.00 Price excl. German VAT tax (19%): € 75.63- Semi-APO Baader filter with IR Blocker
- A combination of our Moon and Skyglow Neodymium filter with fringe killer coating to deliver an amazing colour-corrected image on achromatic refractors.
- Virtually neutral-coloured image without the blue and red halos causing the annoying violet fringe. The increase to image contrast is disturbingly great.
- Reflection-free anti-reflective and optically polished.
-
# 2958090
€ 21.00 Price excl. German VAT tax (19%): € 17.65- Extension Ring with 11mm optical path length, with threaded protective flap for the SP54 external thread
- Required for the connection of the DT-rings SP54 / M28 and SP54 / M37
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens. Only in this way is a vignetting image illumination possible
- 2 adjusting rings for SP54 thread are free with the purchase at each Hyperion DT-ring.
-
From: € 244.00 Price excl. German VAT tax (19%): € 205.04- Baader O-III Ultra-Narrowband Filter – Premium Grade
- 4 nm FWHM, recommended for optical systems from > f/3.4
- For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
-
# 2954209
€ 275.00 Price excl. German VAT tax (19%): € 231.09- Full field sharpness: The ultra-sharp 76° undistorted flat field is unsurpassed by any other modern wide field eyepiece. Also on-axis sharpness and contrast rivals our best, ever released planetary eyepieces, the Zeiss Abbe ZAO I & II.
- Long Eye Relief and optimized for bino-viewing: ~ 20mm of eye relief provides that famous spacewalk feeling, incredibly impressive with bino and both eyes.
- Hard aluminium alloy with industrial quality UV-stabilized anodizing surrounds a set of 8 lenses with one ED- and two Lanthanum elements.
- 2" and 1¼" nosepiece: integrated into one eyepiece of 55mm max outer diameter, supports bino-viewing even for kids.
- Photo-Video Adaption: Like their Hyperion siblings, all Morpheus eyepieces make superb imaging projection optics with the M43 photo/video-thread
- Large scope of supply: includes amongst others Hyperion / Morpheus® M43 extension (#2954250 , € 20,-) and Eyepiece-Holster for Morpheus® eyepieces (#2954202 , € 10,-) – further accessories see product description
-
# 2961153U
€ 230.00 Price excl. German VAT tax (19%): € 193.28- 47.4 mm (2" w/o cell) x 2 mm Baader CMOS H-alpha f/2 Highspeed Filter – Precision Grade
- 2" Filter removed from filter cell, specially selected for use with 2" Filter sliders of the Baader FCCT (Filter Changer Camera Tilter) for RASA 8" and QHY cameras (various versions available)
- 6.5 nm FWHM, recommended for extremely fast optical systems from f/3.4 and faster
- Specially designed for the special filter requirements when used with extremely fast f/2 optics like the Celestron RASA astrographs
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
Shop By Brand
Shop By
- Price
- Stock Level
-
- (599)
- (40)
- (93)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (684)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)