Baader Planetarium

• 2" ClickLock-Clamp and 2" nosepiece.
• Suited for astronomical observation at high magnification
• Hard-silver-coated and protected against aging. Astro quality, manufactured acc. to Zeiss standard

• Baader UFC S70 / M57 (m) Thread-Adapter
• telescope-sided M57 outer thread – for adaptation to Borg telescopes with M57x0.75 thread
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) as well as to UFC extensions

• Classic eyecup with foldable lens hood
• Standard form (for barrel diameter ~32mm with 1mm clear cut)

• Length: 250mm (10")
• Black anodized, without holes.
• Weight: 520g

• Apochromatic, multi-coated fluorite lens system
• 10-times higher line resolution than the world best projection eyepieces
• The FFC fits on every T-2 thread and in every 2" focuser

• Set consisting of four pieces 3D-printed filter holder for unmounted 2" (Ø 47,4 mm) Baader filters
• Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
• We offer selected 2" filters especially for the FCCT in an unmounted variant, but basically all Baader 2" filters work when removed from the filter cell
• The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
• With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
• 2" filter holder also available as single item: 2" (Ø 47,4 mm) filter holder for Baader FCCT (3D-printed) (#2459085 , € 40,-)

• Eyepiece 1¼ "/ T-2 internal thread priced version with M 4 screw
• 1 M4 clamp screw
• Telescope side with T-2 internal thread
• For 1¼" eyepieces or connecters

• For holding Guidescope Rings or V-Clamp

• Telecentric with 2" outer diameter and T-2 threads on both sides
• Aplanatic, with 4x focal length extension to achieve a parallel f/30 beam in conjunction with ~f/7,5 optics systems – free of field curvtare
• Primarily calculated and produced for H-alpha at 656,3 nm, delivering maximum Strehl (definition brightness)

• hand-painted globe with graduation and moon on a chrome ring with a gear box.
• The gear regulates the following four functions
• The earth rotating around its own axis (rotation)
• Earth's axis pointing towards the celestial poles
• The motion ofthe moon around the earth
• The shifting ofthe lunar nodes. It causes that the position of the chromed ring in which the moon runs - the imaginary position of the moon's orbit to the earth changes according to the conditions in nature
• Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.

• To fit #2458196 Ultrashort 2" clamp onto Pentax OTA
• Pentax Adapter M84 / M68
• Telescope side with Carl Zeiss M68 Pentax thread on ocular

• Telescope adapter for telescopes with Starlight Instruments FeatherTouch 3.5" focuser to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
• Developed and manufactured in Germany
• Connection on camera side: 120 x 7.5 mm dovetail
• Black anodized
• Optical length: -2.5 mm
• Inner and outer diameter: D120a/ D92i

• Baader Classic Ortho 10mm 1¼" Eyepiece , apparent field of view 52°, incl. winged rubber eyecup
• Parfocal Eyepiece series with very high transmission
• This eyepiece delivers a pure-white image with outstanding sharpness and contrast
• True High-Transmission- (HT) and Multi-Coating (MC) on all glass-air-surfaces offer a brilliant image while showing almost no internal reflections
• Suitable as projection eyepiece for OPFA (Eyepiece Projection adapter)

• Used for eyepiece projection with shift/sliding focuser
• Telescope side T-2 (M42x0.75) female thread
• Eyepiece-/camera side T-2 (M42x0.75) male thread
• High-quality Aluminum, available in different lengths

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
• SP54i / SP54a extension ring for connection required! (Item #2958090)

• Baader H-alpha f/3 Ultra-Highspeed Filter – Premium Grade
• 3.5 nm FWHM (to harmonize the exposure time with O-III / S-II), recommended for fast optical systems from f/3.4 to f/2.3
• Specially designed for the special filter requirements when used with fast f/3 optics
• For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

NEW VERSION: Steeldrive II motor focuser with Controller

Steeldrive I for Classic Steeltracks is not produced anymore. On this product page you can inform yourself about the Steeldrive I for classic Steeltrack focusers and download the corresponding software.

More details about Steeldrive II

• Baader U-Filter (Venus and UV) 350nm.
• Transmission peak approx. 80% at 350nm, bandwidth 60nm (320-380nm), completely blocking the entire spectral range from 200nm to 1120nm.
• Dielectric multi-coating on optically polished Schott Glass.
• Enables imaging in the deep UV spectral region. A "breakthrough" for imaging the planet Venus! Allows amateur astronomers to capture cloud structures of the Venusian atmosphere.
• Successful astro-application of this filter requires a suitable UV-sensitive lucky imaging camera module (i.e. SKYRIS 274M) with at least a telescope of 5" diameter (a telescope with an 8" diameter is recommended).
• Non-astronomical applications possible: e.g. check for paint damage on cars or state of health of plants and much more. Read more in the detailed description or with a translate tool on this (german) test review: Baader-U" in the "terrestric" Photography

• For locking camera orientation
• Fits between (almost) any of our T-2 fittings
• Allows the rotational rotation of flanged accessories, locking in the appropriate position
• An important component to heavy CCD cameras to connect directly with T-2 thread without the compromise of a plug connection