Baader Planetarium

• Available again for a limited time: Carl Zeiss 1¼" Abbe Barlow lens with T-2 thread made in Germany by Carl Zeiss in Jena – with 1¼" / T-2 ClickLock eyepiece clamp by Baader Planetarium
• visual Barlow lens and photographic eyepiece projection in one system
• Direct T-2 Adaption possible - extends magnification up to 3x - without loss of quality
• The image quality is only exceeded by our 3x-8x flat field FFC-Converter, in case the projection factor exceeds 3x

• Improved version of former MX-Mount
• Artistry, vision and all the performance of a professional grade mount
• Designed to make observatory quality astronomy – field portable
• Control system of 4th generation, featuring USB 2.0 computer to mount interface

• Mit 500 mm optischer Länge und Verschlüssen
• Passend für alle Celestron 14" Schmidt-Cassegrain und EdgeHD Teleskope
• Hilft bei der Vermeidung von Taubildung auf der Schmidt-Platte
• Lange Ausführung zum Schutz vor dem Eindringen von Streulicht in das Tubusinnere
• Stabile Ausführung aus Metall mit zwei Schnellspannern zur einfachen Montage

• Sidewing-Baseplate 400mm for Guidescope-Rings, Size III
• Balancing, 400mm long baseplate, fits onto Baader-Sidewings.
• 1kg Baader balancing weights #2951401

• M43/M43 extension (distance ring), suitable for Morpheus, Hyperion and other eyepieces/adapters with M43 outer thread
• Optical length: 7,5mm
• With this extension the distance of the foldable, as well as the winged rubber eyecup can then be finetuned to optimum height. Also this helps to keep any smartphone holder to firmly clamp over the exiting eye-lens. In addition multiple of these M43- rings may be added to achieve the optimum distance to your camera chip for eyepiece projection.

• Baader Premium grade impermeable RGB-C Clearglass Filters.
• The Baader clear glass filters are used to focus a camera when using very narrow band line filters (due to same mechanical thickness).
• Alternative function: e.g. our Protective Canon EOS T-Ring uses a clear glass filter for dust protection
• NO halos, NO reflections, NO ghosting
• non-ageing sealed coating edges

Please note: We have not planned to produce also a CMOS-optimized version of this clear filter because there is no necessity to do so. Our 7-layer BBAR(BroadBandAntiReflection) -coatings on both sides of the glass-substrate cannot be essentially improved.

• three steel tips made of hardened steel
• suitable for the Baader T-Pod aluminium tripod
• suitable for stable hold of the tripod on soft ground

• To connect all parts of the Baader M68 System directly to a Celestron or AstroPhysics 3,3" thread
• Suitable for direct connection to a EdgeHD 9¼"/11"/14" and SC 11"/14". Also suitable for Celestron- and Astro Physics-Reducers with 3.3" male thread
• Optical tube length only 7mm, total height of the adapter 17mm (can be threaded completely onto a 10mm long thread, e.g. by most Astro Physics reducers)
• Lens-sided 3.3" female thread, eyepiece-sided M68x1 female thread

• BACHES: Thermal Insulation Housing
• The CNC milled two-piece housing, protects the spectrograph from fluctuations in the outside temperature at the telescope
• Very good thermal insulation is achieved by 20mm wall thickness of weather-resistant EPS rigid foam
Learn More

• Transport case with pre-punched compartment for Baader APO 95
• Robust case made of ABS hard plastic
• With compartments for various accessories

• Adapter with M68i x1 to M74i x1 female threads, to adapt M68 parts to focusers with M74 x 1 male thread, e.g. Skywatcher Esprit 120&150, TS-Optics and Omegon APOs 150/1000 with Linearpower focuser
• Changes a M68x1 (Zeiss) male thread into a M74 x 1 female thread
• Part is used in our M74i x 1 ClickLock clamp #2956274
• Optical height: 12,7 mm, Inner diameter (clear aperture): 67 mm

• 3.3" thread for C11 and C14
• For connecting the Baader 2" Deluxe Clamping Eyepiece Holder (T-2 part #17) (#2408140 , € 58,-) to C11 and C14 telescopes
• A clear 50mm aperture
• No vignetting when used on C11 and C14 telescopes

• Adapter for large telescopes made of ABS, for Sky-Surfer III
• fits onto Celestron, Vixen, Skywatcher-Norm
• Single price. Included in scope of supply of Sky Surfer III

• Fixed focal length of 36mm Hyperion Aspheric 2" Eyepiece, 72° extreme widefield for large field of view
• High quality Phantom Group Coating for maximum contrast
• DSLR camera adaptable as projection eyepiece, with system thread SP 54

• 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters
• Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
• The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
• With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
• Also available as set containing of four 31 mm filter holders: 4x filter holder 31 mm for Baader FCCT (3D-printed) (#2459097 , € 129,-)

• Bayonet adapter to fit suitable 1¼" astro-eyepieces onto all Carl Zeiss Diascope Fluorit spotting scopes
• includes Allen Wrench key and two O-rings to adjust stiffness when switching eyepieces
• Please note: The adapter must not be inserted into the spotting scope without an eyepiece. Otherwise, you don‘t have enough grip to remove it.

• Long, 1.5mm thick washer ("strip shims") to adapt Baader VersaBase to different tube sizes
• Dimensions: 110 x 12 x 1.5 mm (length x width x height)
• Already included four times in the BDS-NT or Baader VersaBase (the base of our BDS-NT Diamond Steeltrack®) scope of delivery
• Only suitable for BDS-NT Diamond Steeltrack® for Newtonians

• Standard base viewfinder mounting Pairing MQR III, IV MQR, SkySurfer 5 for mounting on the "second telescope" and for all Vixen-style finderscope mount bases
• The Baader standard basis is milled from solid (no cheaper casting), adjusts all Tubusradien and can be with two screws in the slots - but also with a single screw in the center - absolutely firmly attach.
• The base plate is milled sinusoidal and forms on each tube radius 130-400 mm diameter two linear runs. This provides maximum stability.
• Hole spacing: for attachment onto a telescope OTA, the Baader-Standard-Base has two long-holes of 14 mm length each and 5.3mm width, The middle spacing between both holes is 36 mm. Accordingly the center spacing distance of two 5mm screws may vary from 26 mm to 46 mm

• Reducing piece: M68a to M62a for direct connection of M62 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available) ) to the M68 system
• Chonverts the M68 (Zeiss) female into a M62 male thread
• Telescope side M68 male thread, eyepiece side M62 male thread
• Optical length: 5 mm
• Inner diameter: 59 mm, outer diameter: 76 mm