Baader Planetarium

• Available again for a limited time: Carl Zeiss 1¼" Abbe Barlow lens with T-2 thread made in Germany by Carl Zeiss in Jena – with 1¼" / T-2 ClickLock eyepiece clamp by Baader Planetarium
• visual Barlow lens and photographic eyepiece projection in one system
• Direct T-2 Adaption possible - extends magnification up to 3x - without loss of quality
• The image quality is only exceeded by our 3x-8x flat field FFC-Converter, in case the projection factor exceeds 3x

• Improved version of former MX-Mount
• Artistry, vision and all the performance of a professional grade mount
• Designed to make observatory quality astronomy – field portable
• Control system of 4th generation, featuring USB 2.0 computer to mount interface

• for larger Celestron-Mounts
• Made for outdoor application, water resistant sealed housing. Usable in temperatures from -25°C up to 40°C
• input voltage 100-240V, Output 12.8V / 5A 60W
• Protective-disconnect ellbowed plug German design and quality with EU-wall plug

• Celestron Clean & Collimate (C&C) is only available in German language since this service can only be offered to customers that purchased their Celestron product from an authorized dealer in Germany. Please contact your local dealer - or Celestron.com for repair and service quotations

• Extension ring of 1 "C-mount female thread on T-2 external thread
• Allows very short connection

• Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis
• Mounts directly to the standard screw mount of all Planewave's common telescopes via the straight mounting block.
• Weights can be mounted in horizontal position at the rear of the OTA both "top" and "bottom". This makes it possible to balance the telescope in the vertical position as well.
• The Planewave Leveling-Set consists of
  • 1kg Leveling Weight Ø 75 x 30mm (#2951390 , € 101,-)
  • 2.5 kg leveling counterweight Ø 75x75mm, made of V2A stainless steel (#2951402 , € 143,-)
  • 150mm counterweight-shaft M14, Ø 16mm (#2451554 , € 80,-)
  • Mounting block for leveling counterweight bar M14 for PlaneWave Instruments CDKs (#2451549 , € 48,-)

Successor model for GM 4000:
Stabilized Poser-Supply for10Micron GM 2000 / GM 3000 and 4000

The new control of the mounts is again significantly revised and stabilized, which allows us to become more efficient on the power supply side as well.

The Baader OTP 600W is no longer produced and therefore replaced by the Stabilized Power-Supply for GM 2000 / GM 3000 and GM 4000 (#1452070 , € 230,-)

• Projection dome for the Baader Planetarium, sizes 2.5m and 3.5m diameter
• Geometrically correc half-globe, consiting of 8 segments of each 45° made of fiberglass reinforced polyester.
• Inner color matte white, outer color grey

• Baader UFC S70 / M48 (f) Adapter
• telescope-sided M48 inner thread
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to the
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height: 106 mm

NEW VERSION: Baader OMS-Nano – Remote Switch for 10Micron Mounts

The Remote Switch Module is not produced anymore. Therefore, we have redesigned the Remote Switch and manufactured it with a new look and name. The Remote Switch is now part of our OMS (Observatory Management System). 

More details about the Baader OMS-Nano – Remote Switch for 10Micron Mounts

• DADOS 1¼" Guiding Eyepiece, Kellner 10mm

• Baader UFC 2" Filter Slider / Filter Container M48
• suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
• slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
• Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side

• Hook and loop cable ties with Baader Planetarium logo
• Reusable and closable cable ties for bundling any kind of objects
• 20 mm x 150 mm
• Scope of delivery: 10 x Baader cable ties

• drying agent 125ccm
• environmentally friendly coloured indicator
• re-usable as often as you like
• protects optics from humidity

• Baader M68 VariLock Extension 15-20mm
• Continuosly (stepless) adaptable M68 extension with millimeter scale for fine-tuning of the optical height between 15 and 20mm in the M68-system
• telescope-sided with M68 male (outer) thread
• camera-sided withM68 female (inner) thread

• AstroSolar Photo Film (imaging only), telescope quality, Optical Density OD = 3.8
• Digital solar imaging at highest magnifications and short exposure times. Not suitable for visual observation
• This highest precision film consistently produces strehl ratios of 94 to 96 percent at interferometric tests – thus it performs optically like a Fluorite Triplet Lens by Carl Zeiss or Astro Physics
• AstroSolar Photo Film OD 3.8 is only intended to be used by well-experienced Astro-imagers. This material is not intended to serve for protection during visual solar observation.

• Allows quick changing of accessories such as Cameras, Spotting Scopes, Binoculars or small telescopes on the Astro & Nature tripod
1x included in Astro & Nature tripod scope of supply

• With the S52/M68 adapter, all Baader Wide T-rings can be adapted directly to an M68 female thread. This allows your M68 telescope or accessories to be screwed firmly to your camera with the largest possible aperture.
• The S52/M68 adapter fits all S52 dovetail clamps (D52) - for example our S52-Clicklock #2956252 or the Canon Protective T-Ring #2958550
• Camera-side: S52 dovetail
• Telescope-side: M68x1 male thread