Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2957165
€ 665.00 Price excl. German VAT tax (19%): € 558.82- High-precision, temperature-compensating focusing motor with toothed belt drive for heavy loads (up to 8 kg).
- Prepared for connection to all Baader Steeltrack® focusers (classic and Diamond).
- Contactless end sensor (homing switch) for precise, repeatable positioning to stored absolute positions
- Incl. hand controller with intuitive operation, can alternatively be controlled via PC with USB interface via ASCOM or SteelGO software (for Windows)
- Connection for temperature sensors and additional 12 V / 1A PWM current output, e.g. for dew cap heater
-
# 1451070
€ 186.00 Price excl. German VAT tax (19%): € 156.30- Input Voltage 110-240 volts, output voltage 24 V / 5 amps (factory setting)
- Connection cable fitting for GM 1000 HPS mount
- Short circuit protection
-
# 2459112
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Baader UFC 2" Filter Slider / Filter Container M48
- suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
- slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
- Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side
-
# 2455055
€ 6.50 Price excl. German VAT tax (19%): € 5.46- Hook and loop cable ties with Baader Planetarium logo
- Reusable and closable cable ties for bundling any kind of objects
- 20 mm x 150 mm
- Scope of delivery: 10 x Baader cable ties
-
# 2000317
€ 33.00 Price excl. German VAT tax (19%): € 27.73- Sun replacement halogen bulb - without socket.
- Custom made with sprue spigot at the bottom to allow projection. This bulb is not freely available in stores.
- Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
- Please use only this bulb, otherwise you may destroy the transformer of the device, which due to its size can not output more light power. For continuous operation (3 hours and more), the medium light level must be used.
-
# 2954251
€ 31.00 Price excl. German VAT tax (19%): € 26.05- Morpheus® Adapter to convert the Morpheus M43 male top-thread into a SP54 male thread – without adding onto the optical height
- this adapter allows connection of most standard camera-lenses with filter threads to adapt onto each Morpheus®eyepiece, to use the eyepiece for afocal eyepiece projection photography and achieve outstanding planetary images
- for connecting your camera-lens onto the SP54 thread, you need in addition our "Hyperion DT-rings"
- this adapter is exclusively suitable for Morpheus® 76° eyepieces and is not designed to fit the Hyperion or Hyperion-Zoom family of eyepieces because the optical distance must fit for the Morpheus-eyepieces
-
From: € 34.00 Price excl. German VAT tax (19%): € 28.57- AstroSolar Photo Film (imaging only), telescope quality, Optical Density OD = 3.8
- Digital solar imaging at highest magnifications and short exposure times. Not suitable for visual observation
- This highest precision film consistently produces strehl ratios of 94 to 96 percent at interferometric tests – thus it performs optically like a Fluorite Triplet Lens by Carl Zeiss or Astro Physics
- AstroSolar Photo Film OD 3.8 is only intended to be used by well-experienced Astro-imagers. This material is not intended to serve for protection during visual solar observation.
-
# 2451107
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen Sphinx mount
- suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
- also fits onto Vixen-, Bresser- or Sky-Watcher tripods
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2459135
€ 253.00 Price excl. German VAT tax (19%): € 212.61- Baader UFC S70 / RASA 36cm (14") Adapter
- telescope-sided RASA 36cm-plate
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
-
# 1508005
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Combo of M44 male and T-2 male threads
- T-2 (M42 x 0.75) thread
- To connect T-2 accessories / cameras / T rings to Zeiss telescopes
- Optical path length of 5mm
-
# 2454307
€ 6.00 Price excl. German VAT tax (19%): € 5.04- SR41W/1.55V 10 pc
- For illuminator
- Not for VarioFinder
-
# 2458239
€ 57.00 Price excl. German VAT tax (19%): € 47.90- Adapter with M68i x1 to M63a x1 male thread, to adapt M68 parts to Starlight Instruments Feathertouch 2.5" and TS-Optics (Photo Line) focusers with M63 x 1 female thread
- Changes a M68x1 (Zeiss) male thread into a M63 x 1 male thread
- Part is used in our M63a x 1 ClickLock clamp #2956263
- Optical height: 7,3 mm, Inner diameter (clear aperture): 58 mm
-
# 2408150
€ 40.00 Price excl. German VAT tax (19%): € 33.61- Telescope sided 2" nose piece barrel with safety groove and 2" female filter thread (M48)
- Eyepiece sided with countersunk T-2 thread for a variety of adaptions such as adapting to T-2 binoviewers as well as an M48 male thread (hidden beneath removeable M48 stopper ring).
- Effective optical length only 2.5mm.
- Also available as version with Safety-Kerfs and with extra-short T-2 thread (3mm):
Baader 2" / T-2 (M48) nosepiece with Safety Kerfs (#2458130 , € 45,-)
-
# 2957305
€ 8.50 Price excl. German VAT tax (19%): € 7.14- Binocular-Adapter made of ABS, for Sky-Surfer III
- for Binoculars with front tripod thread
- Single price. Included in scope of supply of Sky Surfer III
-
# 2456005
€ 110.00 Price excl. German VAT tax (19%): € 92.44- Zenith Prisma T-2/90 ° with 32mm Prism
- Connection objective side: T-2 internal thread
- Connection eyepiece: T-2 external thread
- Excellent for Baader Maxbright binoviewer
-
# 2958554
€ 30.00 Price excl. German VAT tax (19%): € 25.21- Changer / Reducing Ring M48 to T-2 with M48 male thread
- Changes the M48 female thread of a adapter into a T-2 male thread
- Can be used to combine T-Rings with M48 male threads with accessories with T-2 male thread
- Made of hardened, stainless steel
- This conversion ring is also part of Baader FlipMirror II Star Diagonal (#2458055 , € 228,-)
-
# 2454502
€ 73.00 Price excl. German VAT tax (19%): € 61.34- Steckhülse zum Anschluss von Zeiss-Diascope-Okularen an Teleskopen mit 2"-Okularaufnahme
- passend für die 1¼" Steckhülse #14 aus unserem Astro T-2 System
-
# 2957262
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Adapter cable from Steeldrive II Controller AUX Port to Cinch for common heat pads with up to 10W.
- It enables the precise temperature control of e.g. dew shield heaters, optical filters and instruments with of +/-0.1 degree accuracy via the AUX input.
- Connected directly to the Steeldrive controller
- The power can either be set in the SteelGo software, or you set a desired temperature for one of the temperature sensors. This prevents undesired heating of the telescope, because you keep the dew cap just above the dew point.
-
# 2457020
€ 96.00 Price excl. German VAT tax (19%): € 80.67- Multipurpose Quick Release III (MQR III) 7x50 for all 50mm finderscopes with diameter of 62mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
- With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
- You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube
- 4mm hex-wrench included
- With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
- Includes Baader Standard Base
-
# 2458170
€ 255.00 Price excl. German VAT tax (19%): € 214.29- M68 titlter for an optimally flattened field of view
- Compatible with the entire Baader M68 system
- 0-1° tilt – allows a shift of up to 1° to compensate for misalignments in the image field
- 9.50 - 10.25 mm optical length
Shop By Brand
Shop By
- Price
- Stock Level
-
- (601)
- (37)
- (94)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (684)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)