QHYCCD

• Compatible with QHY183M, QHY Filter Wheel CFW3-S standard, QHY Filter WheelCFW3-S thin and QHY Off-Axis Guider Small (OAG-S)
• 55mm backfocus length achievable with the kit, e.g. for MPCC
• With the kit 44.1 mm backfocus length achievable with adaptable Canon EF Lens and 46.5 mm backfocus length with adaptable Nikon F Lens
• Kit includes:
  • 1x 8mm M42 to M48 Adapter
  • 1x 3mm M42 screwed Adapter
  • 1x Cam Top Adapter (original name QHY #020063)
  • 1x 0.5mm/1mm/2mm/3mm/7mm/10mm Spacer
  • 8x 21mm M3 screws
  • 8x 10mm M3 screws
  • 8x 12mm M3 screws

• High resolution, monochrome BSI CMOS camera with 102 MegaPixel and highest quantum efficiency with extremely low readout noise.
• Sensor: Sony BSI IMX461 Sensor, Pixel size 3.76μm x 3.76μm
• Sensor size: 44 x 33 mm, image diagonal 55 mm
• AD conversion: unaltered, true 16 bit (65,536 grayscale)
• Readout noise: 1e- to 3.7 e- (depending on readout modes)
• Data interface: USB 3.0
• Internal image memory: DDR 3, 1 GBy
• Full well: up to 720 ke- depending on readout mode at high dynamic range
• Quantum efficiency: max. 90% at 450 nanometers
• Dark current noise: about 0.003e-/pixel/sec at -20°C
• Amplifier glow: Zero
• Noise reduction: user selectable
• Image readout: 4 different modes, user selectable
• This camera model is also available as a scientific PRO version with USB3.0 and 2x10 Gigabit fibre optic interface: QHY 461 M/C PRO, BSI Cooled Scientific Cameras (various versions available)

Now available as Mono version

• Back-Illuminated CMOS + NIR (near infrared) planetary cameras
• With sHGC for extremely low read noise (less than one electron) at high gain
• Uses the latest 2.1 megapixel IMX462 STARVIS CMOS sensor from Sony
• 1920 x 1080 Pixel Array, pixel size of 2.9µm, diagonal 6.5mm
• Support any region ROI
• High QE in the Red and Near IR. The peak QE in the NIR around 800nm is as high or higher as the peak QE in the visible wavelengths.
• Fast frame rates (135 FPS@ 8bit)
• Exposure Time Range from 7µs-900sec
• AD Sample Depth of 12bit (output as 16bit and 8bit)
• Build-in total 512Kbytes Flash Memory. 100Kbytes user-accessible space
• QHY462C includes UV/IR and IR850 filters for RGB, LRGB, IR and monochrome imaging all with one camera, the QHY462M includes IR850 filter.
• Ideal for color planetary- and methan band imaging
• Fit in a standard 1.25-inch eyepiece, Standard 6-pin RJ11 Guide Port
• Use a 5 Gbps USB3.0 interface. Please note: the camera is powered exclusively with the included USB 3.0 cable! The camera has no active cooling
• Please select the appropriate accesspry set for further technical details form the Drop-Down menu below. The QHY 5 III 462 C is available with different accessory sets.

• Cooled Small Size COLDMOS camera with GPS PPS Synced High Precision Hardware Stamp, selected by the NASA New Horizons Team
• Ultra compact with high frame rates, ultra low read noise, high sensitivity and excellent dark current performance 
• Uses the SONY IMX174 CMOS Front Iluminated sensor of 11.25 x 7.03 mm size, 2.3 Megapixel (1920 x 1200 pixel array) at 5.86µm with global shutter
• 138FPS at 1920x1200 resolution, high QE of 78%, and low read noise of 3-5e- 
• Provide highly accurate timing of multiple exposure per second at 5 different sites, all synchronized to the same time base
• Exposure duration from 50µs to 1800sec 
• Dual stage TE cooling to -45C below ambient 
• Anti-Noise, Anti-Amp Glow and Anti-Dew Technology
• USB3.0 High Speed Transfer 
• With 4-pin QHYCFW2 filter wheel control port and a 6-pin autoguider port 
• Includes two working modes: Free Running Mode and Multi-Site Sync Mode
• Ideal for multi-site, high precision timing of exoplanet light curve measurements and is the for cooperative multi-site imaging of asteroid occultations.
• Available as color and mono version. Please select the appropriate camera for further technical details form the Drop-Down menu below

• Uncooled CMOS guide camera (monochrome) fits in a standard 1.25-inch eyepiece
• 1.2 Megapixel, high sensitivity, with an exceptional 74% QE and low noise
• 1280 x 960 pixels at 3.75µm
• The camera is capable of 30 FPS in high resolution mode, 106 FPS in VGA mode 
• Provides outstanding image quality for planetary imaging, autoguiding, deep-sky and all-sky imaging
• USB 2.0 interface. No additional power supply or cable is needed. Please note: the camera is powered exclusively with the included USB 3.0 cable!
• Each QHY5II Series camera comes in its own metal box with USB cable, guide cable, focus ring and 1.25" extension tube.
• Available in color and monochrome version

• QHY Adapter Kit C1 compatible with QHY600M-PH / PRO and QHY Filter Wheel CFW3-L 
• 55mm backfocus length achievable with the kit, e.g. for MPCC
• Kit includes:
• 5mm M54 / M48 Adapter
• 7mm Spacer
• 8x 14mm M3 Screws
• The kit is supplied as a standard accessory with QHY 600M PH, BSI Cooled Cameras (#1931162 , € 5390,-)

• Includes desiccant container and hoses connected to the camera.
• Suitable for a larger amount of silica gel to maintain a dry state for a very long period without maintenance. Desiccant is not included in the scope of delivery. We recommend optional: Silica Gel, orange with coloured indicator, reusable, 125ccm (#1905160 , € 22,-)
• Suitable for QHY cameras that are not to be maintained for a long period of time
• Highly recommended for the SBFL body styles of cameras (QHY600 Ultra Short and QHY268 Ultra Short), which can absorb less moisture before dew forms due to their lower air volume in the sensor chamber

• QHYCFW3 Color Filter Wheel are available in 5, 7 and 9 filter Positions and various filter sizes
• Specially designed filter carousel version can be fixed with 31mm unmounted filters through the new-added screw holes
• Working with high quality ultra-thin hybrid stePPer motor
• Uses a friction drive that with zero backlash. It also Positions and stops with high precision
• Increased the Precision of filter Positioning.
• Supports USB Port and Powered by USB when connected with computer.
• Supports the 4-Pin QHY CFW socket
• QHYCFW3 Color Filter Wheels are available in four versions: QHYCFW3XL (extra-large size), QHYCFW3L (large size), QHYCFW3M (medium size), and QHYCFW3S (small size). Both the QHYCFW3M and QHYCFW3S are also available in a standard version and thin version. Please select the aPProPriate QHYCFW3 for further technical details form the DroP-Down menu below

• Cooled CMOS camera with Back Side Illumintad technology with Sony sensor 533M/C
• Sensor format, square, 3003 x 3003 pixels
• Sensor size 12, x 12.3 mm, diagonal 15.9 mm Pixel size 3.76 µm
• Quantum efficiency over 90% at 450 nanometers (monochrome sensor)
• Exposure times up to 3600 seconds
• Full well capacity 58 ke-
• Readout noise 1.3e- to 3.4 e-
• Dark current 0.0005 e-/pixel/sec at - 20 degrees
• AD conversion 14 bit
• Interface USB 3 High Speed
• Maximum frame rate 27 full frames at 8 bit and 18 full frames at 14 bit, ROI possible (depending on control computer)
• Shutter rolling shutter
• Large internal image memory with 1 GBy DDR3
• 2-stage TE cooling, 35 degrees below ambient at exposure times > 1 second
• With "Anti-Noise", "Anti Amplfier Glow" and "AntiDew" technology
• Diameter and length 90 x 107 mm (optimal for RASA and Hyperstar telescopes)
• Backfocus at 17,5 millimeter
• Please select the appropriate QHY533 camera for more technical details from the dropdown menu below.

QHY Adapter Kits available in three different combinations for QHY 294M / QHY 163M cameras and QHY accessories:

• QHY Adapter Kit A1 compatible with QHY Filter Wheel CFW3-M thin and QHY Medium Off-Axis Guider (OAG-M)
• QHY Adapter Kit A2 compatible with QHY Filter Wheel CFW3-S thin and Canon EF Lens
• QHY Adapter Kit A3 compatible with QHY Filter Wheel CFW3-M thin and Nikon F Lens
• Please select the appropriate adapter kit (A1, A2, A3) from the drop-down menu below for further technical details

• Improved version of its predecessor, the QHY 5-III-485C Planetary and All Sky Camera (#1931030 , € 395,-) with enhanced sensitivity in the near infrared spectral range (NIR).
• Uses Sony's new Starvis II Color CMOS Sensor IMX 585 Back-Side-Illuminated Sensor (BSI) with high dynamic range (HDR) of 88 dB
• 3856 x 2180 Pixel Array. pixel size of 2,9µm to photograph all objects of the solar system
• Full frame rate of 23,5 FPS  at16-bits or 41,5 FPS at 8-bits
• Its sensitivity in the near-infrared range is about 1.7 times higher than that of the old IMX 485 C sensor.
• Improved front-end design – compatible with CS and C-mount lenses
• 1¼" body size for direct telescope connection
• 512MB DDR3 internal image memory
• USB 3.2 Type-C interface. Please note: the camera is powered exclusively with the included USB cable!
• Universal ST-4 guiding interface and LED status indicator for malfunctions
• Includes a UV blocking filter and an IR 850nm filter

• QHY Level Convert Board to make the connection of QHY cameras more user-friendly and reduce the risk of damage.
• Support the QHY GPS box without any further modifications and is indispensable for upgrading the QHY GPS Box (#1932500 , € 540,-) (for 6-pin connectors).
• Four CMOS gates are the most important part of this board.
• The gate’s direction can be controlled by the DIP switch. It can be configured as output direction or input direction, to match the different modes of the four IO pins.
• Different IO voltage can be applied to this gate. So on the user side, it can be configured to different VCC voltage.
• The range is from +1.8V to +5V. The output signal in the user socket will be the voltage of the VCC

• Back-Illuminated CMOS color planetary camera and All Sky camera to photograph all objects of the solar system
• With sHGC technology for extremely low read noise at high gain
• Includes a high resolution 8.3 MP All-Sky camera
• Uses Sony's IMX485, back-illuminated color CMOS sensor with high QE
• 3864 x 2180 Pixel ArrAY of 2,9µm
• Support any region ROI
• Full frame rate of 18.5 FPS at 16-bits or 44 FPS at 8-bits
• Exposure Time Range from 10 µs to 300 Sekunden
• AD Sample Depth of 12bit (output as 8bit and 16bit)
• 128MB DDR bulit-in image buffer
• USB 3.0 interface. Please note: the camera is powered exclusively with the included USB 3.0 cable! The camera has no active cooling.
• Includes a 2.5mm Fisheye lens that converts the planetary camera intoa high-resolution, 8.3 Megapixel All Sky camera with 180-degree field of view.
• Following items are included with the camera: USB3.0 Cable, Tracking Cable, Focus Position Locking Ring, C-mount extension ring, 1.25" extension tube
• Available in color only

• USB3 super-speed CMOS cameras and guiders.
• With a maximumimage transfer speed up to 5 Gbps, the cameras produce the high frame rate ideal for high speed planetary imaging. Please note: the camera is powered exclusively with the included USB 3.0 cable!
• Fit in a standard 1.25-inch eyepiece
• With Advanced Heat Design and Aircraft Spec Socket
• Please select the appropriate QHY 5-III 174 M/C camera for further technical details form the
• Drop-Down menu below

• World’s highest resolution cooled scientific CMOS Camera uses a 151 Megapixel Sony IMX411 Back-Illuminated Sensor - 14192 x 10640 pixel array with 3.76μm pixels
• Native 16-bit AD on-chip – The output is real 16-bits with 65536 levels
• Full Well Capacity of 44ke- at 3.76μm, 396ke- at 11um
• Ultra-Low Read Noise, 1 Electron at High Gain, 2.4e- to 2.8e- at Low Gain
• With extremely low dark current
• Use SONY's Exmor BSI CMOS technology and Electronic Rolling Shutter
• Air and Water Cooling with Two-stage Thermoelectric Cooler
• Interfaces: USB 3.0 plus 2 x 10 Gigabit fiber. This camera model supports 2X10GB Ethernet ! An OPTIONAL QHY PCIE Kit (#1931116 , € 3050,-) is necessary to achieve such high transfer rates. HOWEVER - a grabber card is not necessary to operate the camera, since it is likewise capable to work under USB3.0 connection. Some users may own two or more ethernet compatible cameras but only do operate one camera at a time. In this case just one grabber card needs to be ordered. But for multiple cameras, each to operate with 2X10GB simultaneously, then the same number of grabber cards are needed.
• Available in monochrome or color version
• Please select the appropriate QHY411 camera for further technical details form the Drop-Down menu below

• High resolution cooled scientific CMOS Camera uses a 102 Megapixel Sony IMX461 Exmore R Sensor - 11656 x 8742 pixel array with 3.76μm pixels
• Back-illuminated for high QE and dynamic range
• Native 16-bit AD on-chip – The output is real 16-bits with 65536 levels
• Full Well Capacity of 44ke- at 3.76um, 396ke- at 11μm
• Ultra Low Read Noise, 1 Electron at High Gain
• With extremely Low Dark Current
• Use SONY's Exmor BSI CMOS technology and Electronic Rolling Shutter
• Air and Water Cooling with two-stage Thermoelectric Cooler
• Interfaces: USB 3.0 plus 2 x 10 Gigabit fiber port. This camera model supports 2X10GB Ethernet ! For the use of the GB interfaces, a is necessary to achieve such high transfer rates. HOWEVER - a grabber card is not necessary to operate the camera, since it is likewise capable to work under USB3.0 connection. Some users may own two or more ethernet compatible cameras but only do operate one camera at a time. In this case just one grabber card needs to be ordered. But for multiple cameras, each to operate with 2X10GB simultaneously, then the same number of grabber cards are needed.
• Each model is available in monochrome or color.
• Please select the appropriate QHY461 camera for further technical details from the Drop-Down menu below
• This camera ist also available as a monochrome photo version without the scientific features: QHY 461M PH, BSI Medium Format CMOS Camera, gekühlt (#1931294 , € 12650,-)