Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451181
€ 445.00 Price excl. German VAT tax (19%): € 373.95- Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- suitable as a pillar adapter flange to the
- Top plate precision milled flat and threaded to fit the base plate.
- Overall height: 100 mm
-
# 2454405
€ 196.00 Price excl. German VAT tax (19%): € 164.71- Schmidt-Cassegrain telecompressor/reducer and flatfield-corrector
- For Schmidt-Cassegrain-telescopes with 2" eyepiece clamp or for direct connection to SC-thread through Baader T Adapter (BTA) for SC and MAK Telescopes (T-2 part #21) (#2408160 , € 63,-) or Baader SC / HD Ultra Short T-Adaptor, 9mm optical length (#2958500B , € 51,-)
- Variable reducing factor 5,9 to 3,5
- Preconfigurated for use with T-2-thread of the Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) and for Mark V Großfeld (Giant)-Binocular (#2456410 , € 1425,-) with T-2 quick changer
- Can be used with T-2-eyepiece-clamps
- Baader T-2 / 7.5 mm Extension Tube (T-2 part #25C) (#1508155 , € 22,-) is included
-
# 1452075
€ 152.00 Price excl. German VAT tax (19%): € 127.73- made of V2A stainless steel
- for axis diameter of 40 mm
- Diameter 185 x H 30 mm
- 6kg
-
# 2459119
€ 30.00 Price excl. German VAT tax (19%): € 25.21- Baader UFC S52 Adapter
- telescope-sided with mounting plate for UFC-Base (screws included)
- camera-sided with S52 dovetail for the Baader Protective EOS T-Ring or all Baader Wide-T-Rings
- can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and allows camera-sided adaptation of adapters/cameras with S52 dovetail receptor clamps
-
From: € 39.00 Price excl. German VAT tax (19%): € 32.77
- Safe solar observation and photography with all spotting scopes, amateur telescopes and camera lenses
- AstroSolar Safety Film OD 5.0, mounted stress free in high-quality cell
- Scope of supply: ASSF Filter (Apertures 50 to 100mm) come with three centering bolts of 13mm diameter and 24 mm height, adjustable to the tube diameter of your binocular. ASSF 115 and 130 packages come with three centering bolts of 10mm diameter and 38mm length. In addition three safety straps with glue-pads and 32-page mounting instructions.
-
# 2404105
€ 185.00 Price excl. German VAT tax (19%): € 155.46- With rubber grip surface and eyeshield
- eye-friendly ease of viewing - die image will stay visible, even after sligth change of head or telescope position
- 5 lenses in 3 groups, resulting in bright image, absolutely sharp edges, flat image field and correctly place exit pupil
- 35mm focal length, 7x (MC) multi-coated optics
-
# 2459153
€ 11.00 Price excl. German VAT tax (19%): € 9.24- Baader UFC 1¼" AUX-Filter-Holder
- suitable for mounted 1¼" filters
- Requires 1x UFC D50.4 Slider #2459113
- gets mounted into the UFC D50 slider, this slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
-
From: € 48.00 Price excl. German VAT tax (19%): € 40.34
- Baader Neutral Density Filters ND 0.6 / 0.9 / 1.8 / 3.0.
- For perfect energy management during Lunar and Solar observation. Suitable for solar observing only as an additional filter!
- If you need to reduce glare and want to use a filter ahead of the focal point (e.g. before a binocular), then the neutral density filters are just right.
- Fine optical polish results in no loss of sharpness at high magnifications even with a filter position 20-30cm in front of the focal point.
- Phantom Group coated. No ghosting, reflections or stray light.
- Threaded both sides of the glass allows combination with other filters (e.g. Baader Colour Filters).
-
# 2451116
€ 122.00 Price excl. German VAT tax (19%): € 102.52- suitable for Celestron CGEM-DX- and CGE-Pro mounts
- Suitable for the and Baader Hardwood Tripods
- Attention: for Adaptation on Baader Short Pillar III w/o Flange Adapter (#2451150 , € 260,-) the Universal Base-Ring for Baader Short-Steel-Pillar III (#2451155 , € 61,-) is needed.
-
# 2454835
€ 31.00 Price excl. German VAT tax (19%): € 26.05- converts any 2" (SC) female thread into a M44 x 1 female thread - without extending the optical length
- manufactured to adapt our Hyperion Universal Zoom Mark IV onto most spotting scopes (see animation on the right)
- Note: for fitting the optical nose of the Zoom into the receptor at some spotting scopes, the thin dust cover ring needs to be removed - see images
- suitable for adaptation to Leica spotting scope with male M44 x 1 connection thread. Also suitable for all M44x1 threads according to the old Zeiss (Jena) standard.
- Adapter with continuous 2" male and M44 x 1 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )
-
# 1508030
€ 33.00 Price excl. German VAT tax (19%): € 27.73- Filter holder with T-2 threads on both sides and 1¼" M28.5 internal filter thread.
- Used for attaching 1¼" filters before Baader binoculars
- A 1¼" filter can be attached from either side and will sit within this adaptor
-
# 2957220
€ 365.00 Price excl. German VAT tax (19%): € 306.72- Baader Diamond Steeltrack® (BDS-SC) for Schmidt-Cassegrains (EdgeHD) with 30 mm focus travel
- Minimum height (as supplied – incl. 2" clamp): 93 mm
- Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 82 mm
- Minimum height (with optional S58 ClickLock clamp): 112 mm
- Focuser weight (as supplied – incl. 2" Klemme): 1.040 g (36.7 oz)
- Includes 2" and 3.3" adapter to fit all C14/C11/C9¼/C8/C6/ OTA’s
-
# 2454602
€ 635.00 Price excl. German VAT tax (19%): € 533.61- Eyepiece set with four Hyperion focal lengths (5, 10, 17, 24 mm), incl. Eyepiece case
- Huge 68 degree wide angle field, tailored to the maximum Visual angle of the human eye
- Phantom group coatings in Zeiss class for complete freedom of reflections and maximum image contrast
- Modular design of the eyepiece body allows modification of the eyepiece focal length with optional finetuning rings
- Camera ready! Almost all DSLR camera bodies can be connected but also simpler fixed lens cameras directly to the Hyperion eyepieces
-
# 2458271
€ 36.00 Price excl. German VAT tax (19%): € 30.25- T-2 (M42x0.75) Locking ring with lever for direct attachment of the MaxBright® II onto all Baader T-2 star diagonals, be it prisms or mirrors (e.g. to directly couple the body of the Maxbright II with the Baader Prism Diagonal T-2/90° 32mm (#2456005 , € 110,-)
- An Bino auxillary-ring for adaptation of MaxBright® II (#2458272 , € 10,-) is additionally required for adaptation of the MaxBright® II. The Bino auxillary-ring is placed between the binocular and the T-2 locking ring.
- If the lever of the locking ring comes to rest in an unfavourable position you can still adjust the position of the lever. The lever is only threaded into the ring at the outer circumference. This lever may be threaded into any of the three M4 threads each spaced 120° apart.
-
# 2408166
€ 27.00 Price excl. German VAT tax (19%): € 22.69- Allows mounting of Baader 2" filters
- Needs Hyperion DT-rings #2958028 - 2458062 and additional Stepper Rings M67 up to M82
- All Baader 2" filters in version M48 thread can be customised with specific extension tubes on almost all DSRL lenses.
-
# 2957282
€ 43.00 Price excl. German VAT tax (19%): € 36.13- to connect Refractors with 97mm inner diameter
- fitting for many Synta and Celestron tubes
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
-
# 2456120
€ 670.00 Price excl. German VAT tax (19%): € 563.03- 2" ClickLock-Clamp and 2" nosepiece.
- Suited for astronomical observation at high magnification
- Hard-silver-coated and protected against aging. Astro quality, manufactured acc. to Zeiss standard
-
# 2459137
€ 39.00 Price excl. German VAT tax (19%): € 32.77- Baader UFC S70 / M57 (m) Thread-Adapter
- telescope-sided M57 outer thread – for adaptation to Borg telescopes with M57x0.75 thread
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) as well as to UFC extensions
-
# 2454652
€ 10.00 Price excl. German VAT tax (19%): € 8.40- Classic eyecup with foldable lens hood
- Standard form (for barrel diameter ~32mm with 1mm clear cut)
-
# 1501605
€ 78.00 Price excl. German VAT tax (19%): € 65.55- Length: 250mm (10")
- Black anodized, without holes.
- Weight: 520g