Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2459135
€ 253.00 Price excl. German VAT tax (19%): € 212.61- Baader UFC S70 / RASA 36cm (14") Adapter
- telescope-sided RASA 36cm-plate
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
-
# 2454601
€ 80.00 Price excl. German VAT tax (19%): € 67.23- Eyepiece case with pre-punched compartments for up to eight eyepieces
- Suitable for Morpheus and Hyperion eyepieces
- Eyepieces NOT included
-
From: € 315.00 Price excl. German VAT tax (19%): € 264.71- Multi-Purpose Variofinder 10x60 with Astro Lens and 45° erect image prism and 25mm eyepiece with illuminated measuring recticle, 4,5° field of view
- 61mm aperture with Baader Phantom Group Coating, 250mm focal length, 1:4.1 focal ratio
- Can be used also as guide scope or 60mm spotting scope
- Including EQ dovetail/Tripod adapter
- The Baader MQR can be used either in full height or in a low profile configuration
- The V-dovetail and ring-base-plate of the MQR-finder-holder can be directly mounted onto each other without the intermediate spacer, with the help of two (optional) M5x12 mm screws. This allows to use the finder in a low profile configuration as it is desirable for Schmidt-Cassergrain OTAs
- The spacer itself is equipped with a mini-weaver-style dovetail so that it can carry a SkySurfer III or SkySurfer V red dot finder as well
-
# 2455037
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Baader RS-232 cable for NexStar - made in Germany
- Connects the RJ 11 port of your hand control to the RS 232 port of your PC.
- Necessary to upgrade the Flash EProm Hand Controller and to control the telescope e.g. over NexRemote.
- If your PC / laptop no RS 232 interface, you also require the USB - RS 232 converter cable
-
# 2458271
€ 36.00 Price excl. German VAT tax (19%): € 30.25- T-2 (M42x0.75) Locking ring with lever for direct attachment of the MaxBright® II onto all Baader T-2 star diagonals, be it prisms or mirrors (e.g. to directly couple the body of the Maxbright II with the Baader Prism Diagonal T-2/90° 32mm (#2456005 , € 110,-)
- An Bino auxillary-ring for adaptation of MaxBright® II (#2458272 , € 10,-) is additionally required for adaptation of the MaxBright® II. The Bino auxillary-ring is placed between the binocular and the T-2 locking ring.
- If the lever of the locking ring comes to rest in an unfavourable position you can still adjust the position of the lever. The lever is only threaded into the ring at the outer circumference. This lever may be threaded into any of the three M4 threads each spaced 120° apart.
-
# 2958046
€ 19.00 Price excl. German VAT tax (19%): € 15.97- DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
-
# 2957235
€ 6.00 Price excl. German VAT tax (19%): € 5.04- Long, 1.5mm thick washer ("strip shims") to adapt Baader VersaBase to different tube sizes
- Dimensions: 110 x 12 x 1.5 mm (length x width x height)
- Already included four times in the BDS-NT or Baader VersaBase (the base of our BDS-NT Diamond Steeltrack®) scope of delivery
- Only suitable for BDS-NT Diamond Steeltrack® for Newtonians
-
# 2457011
€ 47.00 Price excl. German VAT tax (19%): € 39.50- Universal Red Dot Mount RDM – holder for red dot finders with 70 mm height, includes Standard Base
- All metal design (rail part & base part)
- Weaver gun-rail standard 11mm standard gun rail – fits all Red Dot finders
- V-shaped dove-tail fits most finder-shoes of Celestron, Sky-Watcher, Vixen and Bresser telescopes, includes Baader Standard Base #2457000 to fit all telescopes with one or two mounting screws
-
# 2459170
€ 39.00 Price excl. German VAT tax (19%): € 32.77- Baader UFC Fitting / T-2 (f) Thread Adapter
- telescope-side: mounting plate for UFC-Base
- camera-side: with T-2 female thread, especially for ASI cameras with T-2 (m) thread and 6.5mm back focus (ASI T-2 inner thread ring removed)
- can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-)
- Optical height: 8.5 mm
-
# 2958086
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Hyperion Zoom Adapter for M43 female thread to SP54 male thread
- This adapter allows the connection of all standard camera lenses with filter thread to the Hyperion Zoom 8-24mm Mark III (discontinued) and the Baader Hyperion Universal Zoom Mark IV, 8-24mm eyepiece (1¼" / 2") (#2454826 , € 275,-) , to use the eyepiece in conjunction with the camera lens as a so-called "afocal projective system".
- The connection rings from this system are referred to as "Hyperion DT rings". All you need is the matching SP54 adapter for your filter thread. Available adapters are listed below.
- Not suitable for Morpheus® 76 ° eyepieces. Morpheus version now available: Baader Morpheus® M43 / SP54 Adapter (#2954251 , € 31,-)
-
# 2451530
€ 48.00 Price excl. German VAT tax (19%): € 40.34- V-dovetail, 70mm diameter
- Pairing Vixen / Synta / SkyWatcher / Celestron / Baader V - for GIRO II
- Massive EQ-clamp, black anodized, Weight: 150g
- To accommodate all terminal strips of Vixen GP / GPDX, Bresser, Synta, Skywatcher
- Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)
-
# 2459212
€ 95.00 Price excl. German VAT tax (19%): € 79.83 -
# 2459196
€ 30.00 Price excl. German VAT tax (19%): € 25.21- 3D-printed UFC seal to close UFC systems without inserted filter slides
- Suitable for all UFC systems - closes the opening for the filter sliding of the UFC against dust and light
- Does NOT vignette the optical path when inserted
- STL files for free download are available under TAB Downloads. You only need to login with your customer account or register on our website.
Please note: The download file is licensed under the Creative Commons License CC BY-NC-SA 4.0. You may pass on the file under Attribution © Baader Planetarium GmbH as well as linking the license and indicating any changes. The file may not be used for commercial purposes. If the file is changed, it must be redistributed under the same license.
-
# 1905130
€ 19.00 Price excl. German VAT tax (19%): € 15.97- There is often a problem with off-axis systems or folding mirror attachments, where the receptacles of normal eyepieces is just 1-2cm too short to be able to adjust the sharpness level properly.
- Optical path length 18.5mm
- 1¼" filter thread on both sides and can be screwed into almost every 1¼" eyepiece.
- The inner dimensions are prepared for holding the lenses of our glass path correctors 1:1.25 and 1:1.7
-
# 2451310
€ 196.00 Price excl. German VAT tax (19%): € 164.71- Telescope adapter for Hedrick focuser 3.5" for PlaneWave CDK 14/17/20/24" to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
- Designed and manufactured in Germany
- Connections on camera side: 120 x 7.5 mm dovetail
- Black anodized
- Optical ength: 0.5 mm
- Internal and external diameter: D120a/ D82,5i
-
# 2951406
€ 158.00 Price excl. German VAT tax (19%): € 132.77- made of V2A stainless steel
- with CDP = Camera Docking Port, 28,7mm diam., ¼" photo-thread
- Ø140x60mm, bore Ø 28,7mm – may be extended up to Ø 56mm
- 6kg
-
# 2000308
€ 42.00 Price excl. German VAT tax (19%): € 35.29- Sun cap with screw threads that covers the sun-projection-lamp of the Baader Planetarium is made of milk glass. Please note on the right, the simple plastic version, which was only plugged on the base, is no longer produced.
- To project stars, glass sun cap must be removed.
- Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
-
# 2454502
€ 73.00 Price excl. German VAT tax (19%): € 61.34- Steckhülse zum Anschluss von Zeiss-Diascope-Okularen an Teleskopen mit 2"-Okularaufnahme
- passend für die 1¼" Steckhülse #14 aus unserem Astro T-2 System
-
# 1324000
€ 395.00 Price excl. German VAT tax (19%): € 331.93- Ring for dovetail for the Baader 3,5" Quick Changing Ring (#1324005 , € 275,-) to connect, rotate and change large cameras, spectrographs or visual accessories, as well as to the Securfit system rem and with adapters of the 2" and M68 system respectively.
- Suitable for Hedrick Focuser 3.5" for Planewave CDK 14 - 24"
- Creates a quick change and rotating device with standard load capacity when coupled with Baader 3,5" Quick Changing Ring (#1324005 , € 275,-)
- Quick release clamping for heavy accessories - with brass-clamping
-
# 2956185
€ 55.00 Price excl. German VAT tax (19%): € 46.22- Baader Q-Barlow lense 2.25x, 1¼" barrel
- dual factor lens assy (1.3x/ 2.25x)
- Modern High-Transmission Multi-Coating all air-glass surfaces delivers a remarkably brilliant image with extremely low internal reflections
- Extends the possible focal lengths of the Q-Turret eyepiece set
Shop By Brand
Shop By
- Price
- Stock Level
-
- (604)
- (34)
- (94)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (685)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)