Mount Accessories
-
# 2457577A
€ 125.00 Price excl. German VAT tax (19%): € 105.04- Power converter 12V/24V 5Ah with car plug for GM 1000/GM 2000
- ONLY approved for operation in automotive batteries with 12V. Not suitable for operation with 12V power supplies
- Throttling of the Goto mount speed to a maximum of 2°-4° mandatory!
-
# 2455037
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Baader RS-232 cable for NexStar - made in Germany
- Connects the RJ 11 port of your hand control to the RS 232 port of your PC.
- Necessary to upgrade the Flash EProm Hand Controller and to control the telescope e.g. over NexRemote.
- If your PC / laptop no RS 232 interface, you also require the USB - RS 232 converter cable
-
# 2455035
€ 43.00 Price excl. German VAT tax (19%): € 36.13- Baader USB / RS-232 converter cable (similar to Celestron Item Nr.18775), however, made in Germany
- To connect a device with RS 232 interface to the USB port of a laptop
- Required drivers for Windows, Mac and Linux can be found under the "Downloads" tab
-
# 2451576
€ 80.00 Price excl. German VAT tax (19%): € 67.23- made of V2A stainless steel
- including 3" riderclamp / 60mm long to mount onto 3" dovetails
- 1 kg
-
# 2451531
€ 90.00 Price excl. German VAT tax (19%): € 75.63- made of V2A stainless steel
- including V-clamp 70mm diam. to mount onto V-dovetails
- 1 kg
-
# 2451020
€ 235.00 Price excl. German VAT tax (19%): € 197.48- rigid photo tripod, maximum height: 189 cm
- Fluid Head with handles, 1x quick mounting plate included
- Double tube tripod legs in both extension levels
- carrying bad included
-
# 1452083
€ 354.00 Price excl. German VAT tax (19%): € 297.48- made of V2A stainless steel
- for axis diameter of 60 mm
- Diameter 225 x H 70 mm
- 20kg
-
# 1452080
€ 208.00 Price excl. German VAT tax (19%): € 174.79- made of V2A stainless steel
- for axis diameter of 40 mm
- Diameter 185 x 60 mm
- 12kg
-
# 1452075
€ 152.00 Price excl. German VAT tax (19%): € 127.73- made of V2A stainless steel
- for axis diameter of 40 mm
- Diameter 185 x H 30 mm
- 6kg
-
# 1452073
€ 167.00 Price excl. German VAT tax (19%): € 140.34- made of V2A stainless steel
- for axis diameter of 30 mm
- Diameter 140 x H 60 mm
- 6kg
-
# 1452072
€ 108.00 Price excl. German VAT tax (19%): € 90.76- made of V2A stainless steel
- for axis diameter of 30 mm
- Diameter 140 x H 30 mm
- 3kg
-
# 1452070
€ 230.00 Price excl. German VAT tax (19%): € 193.28- Input voltage 220/230 volts, output voltage 25 volts / 10.5 A factory setting
- Why 25V? The control box of 10 Micron mounts can work with 24V up to a maximum of 27V. Since 24V power supplies can occasionally drop below 24V at high loads and low temperatures - which can lead to the failure of the control computer - the power supplies for GM 2000 HPS, GM 3000 HPS and GM 4000 HPS are therefore preset to 25V. This value has proven itself over the years.
- Output via 4mm banana sockets, fitting for the 10 Micron power cables that come with the mount
- Short circuit protection
-
# 2951401
€ 57.00 Price excl. German VAT tax (19%): € 47.90- made of V2A stainless steel
- with 1¼" thread (male/female) – to mount on top of Dovetail Clamp V or 3" Rider clamp (several weights may be combined)
- 1 kg
-
# 2951403
€ 104.00 Price excl. German VAT tax (19%): € 87.39- made of V2A stainless steel
- Ø 140x30mm, bore Ø 28,7mm
- 3 kg
-
# 2951406
€ 158.00 Price excl. German VAT tax (19%): € 132.77- made of V2A stainless steel
- with CDP = Camera Docking Port, 28,7mm diam., ¼" photo-thread
- Ø140x60mm, bore Ø 28,7mm – may be extended up to Ø 56mm
- 6kg
-
# 2451161
€ 329.00 Price excl. German VAT tax (19%): € 276.47- Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- Suitable as a pillar adapter flange to the Baader conical steel pillar #2451210
- Top plate precision milled flat and threaded to fit the base plate.
- Height 270 mm
-
# 2451160
€ 329.00 Price excl. German VAT tax (19%): € 276.47- Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- Suitable as a pillar adapter flange to the Baader conical steel pillar #
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Height 240mm
-
# 2451180
€ 380.00 Price excl. German VAT tax (19%): € 319.33- Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillarC
- Consisting of two solid Steel Plates 1" thick, separated by six 1.5" steel bars 4" long
- Overall height 6" (150 mm)
- Bottom plate Diam. 240 mm, matching the top plate of the HDCO
- Pre adjustable in Azimuth ± 6 Degrees
- Top plate precision milled flat and threaded to fit the Paramount square base plate
- Suitable as a pillar adapter flange to the
-
From: € 61.00 Price excl. German VAT tax (19%): € 51.26
- Network Cable (red) with ColdTemp-specified CAT-7 wire (CAT6a plug)
- Ideally suited for observatory installations. The special sheath of these cables remains elastic and shatterproof, even at low temperatures. li>
- Normal network cables that are passed through the mount could break or be damaged due to the very small bending radius
- The CAT 7 specification of the cable allows cable management next to power cables in mounts at short range up to 220V without affecting the data. li>
- available in 3, 5, 15, 30 meters ul> Learn More
-
# 2457632
€ 14.00 Price excl. German VAT tax (19%): € 11.76- Y-cable for powering two 12 V instruments with one power supply (for 5.5 / 2.1 plugs)
- For up to 60W total power
- 1x adapter for barrel connector 5,5/2,1 mm
- 2x barrel connectors 5,5/2,1 mm
- Length: 37 cm