Baader Planetarium

• Using this device, you can check instantaneously the seeing value in arc seconds at your specific location
• Shows instant seeing value, light input and 1 minute moving average
• Separate sensor can be placed next to the entrance pupil of your instrument
• Runs on battery or USB

• Very short adapter, changes from 2" SC / HD male thread to T-2 male thread
• Ultrashort Adapter for all Schmidt-Cassegrain / EdgeHD telescopes
• SC-T Ultrashort Adapter, T-2 outer (male) thread / 2" SC inner (female) thread, pitch: 24/inch
• Only 9mm optical path length (8mm with the Delrin-ring removed)

• Leveling counterweight for Baader Leveling counterweightshafts
• For axis diameter 16mm
• Diameter 75mmxH75
• 2.5kg own weight

• Classic Baader Slit-Dome for the amateur field, with electronic motor
• Built of hardened and lightweight glassfiber polyester, serves as Wind-, Light- and Weather-protection
• 10 years warranty on Storm-resistance up to 200km/h, many additional features and acccessories available, please ask us
• Dome sizes: 2,1 Meter to 3,2 Meter outer diameter

• with 2" bronze pressure ring and 39,5mm length, 60mm outer diameter
• This reducer fits onto every 2" barrel and gets clamped with two M4 screws (without leaving marks on the 2" barrel)
This allows clamping of every 2" accessory into focusers with 60mm inner diameter, such as the Pentax-Norm 60mm

• suitable for temperatures from -25°C up to +40°C
• this is the grease we use the most when refurbishing quality mounts – with brilliant slipping-properties, ultra low slip-stick tendency and longlife-stability
• suitable for all European temperature-ranges

• Baader UBVRI-U Bandpass Filter, suitable from
• Classic photometric filter with transmission according to Bessel – parfocal with all Baader filters of the same size
• Manufactured with most advanced ion beam coating technology / Daylight-Proof
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Equally suitable for modern CMOS cameras as well as for older CCD camera technologies

• Baader UFC S70 / 11" RASA Adapter
• telescope-sided RASA 11"-plate
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions

• Height  20 mm + leveling space 30-50 mm, incl. ground sill anchor
• Sutiable for the following Baader Medium Pillar (BMP) Levelling flanges:
  • Baader Medium Pillar (BMP) Levelling Flange For AstroPhysics 1200/1600 Mount (#2451173 , € 398,-)
  • Baader Medium Pillar (BMP) Levelling Flange for GM 2000 and AP 1100/900 GTO Mounts (#2451171 , € 445,-)
  • Baader Medium Pillar (BMP) Levelling Flange For ME/ME II Paramount Mounts (#2451180 , € 380,-)
  • Baader Medium Pillar (BMP) Levelling Flange For Paramount MX (#2451181 , € 445,-)
  • Baader Steel Levelling Flange for ALT 5ADN mounts (#2451160 , € 329,-)
  • Baader Steel Levelling Flange for ALT 7ADN Mounts (#2451161 , € 329,-)

The Baader levelling flange base is used to mount Baader leveling flanges on customer-provided pillars. Fastening material is included.

• Mounting plate for Baader guidescope rings size #1 & #2, length 300mm, hole diameters 3.2" (10Micron/Astro Physics), 3/8" photo thread or 3" Losmandy dovetail clamp
• Double mounting plate, predrilled for Baader clamps: V-clamp #2451530; PanEQ #2451566 and #2451525 as well as Stronghold Tangent Assembly #2450310
• Fitting for all 3" (Losmandy-Norm) dovatail clamps, predrilled to fit 10Micron and Astro Physics mounts. Also fits on AP plates #140 1128 (13") as well as #140 1129 (16") to mount Baader guidescope rings parallel to the main OTA and use two telescopes side by side
• Delivery WITHOUT guide scope rings or other accessories

• made of V2A stainless steel
• for axis diameter of 30 mm
• Diameter 140 x H 60 mm
• 6kg

• Baader UFC Straylight-Flange
• telescope-sided with mounting plate for UFC-Base (screws included)
• camera-sided with straylight flange, needed when mounting UFC in front of camera lenses without telescope adaptation
• can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-)

• Remote Switch OMS-Nano (Observation Management System) used to turn your 10Micron mount on and off from remote
• With 1m connection cable, 3m long LAN-cable and 2m long USB-cable
• 12V/100-240V Power Supply
• Incl. web interface and manual
• Replaces the previous  Remote Switch for 10Micron mounts (#2455030 , € 265,-) , which is no longer produced.

• Tube rings 99mm for Baader APO 95mm

• Baader UFC 36 mm AUX-Filter-Holder
• suitable for unmounted, round 36 mm filters
• Requires 1x UFC D50.4 Slider #2459113
• gets mounted into the UFC D50 slider, this slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily

• Baader 7.5 nm Solar Continuum Filter, CWL 540nm
• A must for owners of achromatic refractors. This narrowband-filter cuts the spectral range where lens optics draw sharpest and contrastiest. The Baader Solar Continuum Filter lets you use the full power of your telescope.
• Enhances contrast and reduces the effect of atmospheric turbulence (in combination with white light solar filters)
• Enormous contrast gain in monochrome photography even on apochromatic systems
• Important note: The Solar Continuum Filter must be used ONLY with additional filtering (e.g. Baader Herschel prism or AstroSolar Safety Film)

• suitable for Celestron CGEM mount
• suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
• Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed

• converts any 2" (SC) female thread into a M48 x 0.75 female thread - without extending the optical length
• initially manufactured to adapt our Hyperion Universal Zoom Mark IV onto any photographic M48 x 0,75 (2" filter-)thread (see animation on the right)
• this adapter can also work as an expansion ring to convert a photographic M48-thread into a male 2" SC thread
• suitable for adaptation of any accessory with male M48 connection thread, e.g. our VariLock 20-29mm and VariLock 29-46mm clamps
• Adapter with continuous 2" male and M48 female thread, frontsided two slits